Nakup rabljenih strojev (200.000)

Stanje: rabljeno, Leto izdelave: 1991, x-travel 1200 mm y-travel 600 mm Fpjdpfxot Hwqwe Aatei z-travel 600 mm Total power requirement 25 kW Machine weight approx. 11.5 t M A H O CNC-controlled universal bed-type machining center Model: MH 1200 S (#120012) Year of manufacture: 1991, partially overhauled and modernized by MMD in 2007 _____ X-axis (longitudinal): X 1,200 mm Y-axis (vertical): Y 600 mm Z-axis (cross): Z 600 mm Table size (CNC rotary table): 1,000 x 800 mm Max. outreach: 900 mm Spindle taper: SK 40 Spindle speeds (infinitely variable in 2 stages): 20 – 6,300 rpm Workpiece weight approx.: 1,000 kg Feed/rapid traverse in XYZ-axes: 1 – 4,000 / 12,000 mm/min Feed/rapid traverse in B-axis: 1–1,500°/10 rpm Spindle drive: 15 kW Total drive power approx.: 25 kW – 380 V – 50 Hz Weight approx.: 11,500 kg (LxWxH = 2.95 x 3.70 x 2.80 m) Accessories / Special Equipment: • MAHO CNC 5-axis contouring control type CNC 432 with color display, graphics, all standard subprograms and cycles, and mobile hand-held console, RS 232 interface for external data transfer • CNC rotary table (B-axis) in combination with swivel milling head enables 5-axis machining, resolution 360,000° • Vertical, swiveling milling head with hydraulic tool clamping • Horizontal milling spindle with hydraulic tool clamping • CNC-controlled tool changer with 36 positions, tool life monitoring, and tool breakage monitoring • Standalone coolant system (no IKZ), full enclosure with large sliding doors, chip conveyor, oil cooler for hydraulics Condition: Very good – under power, ready for demonstration. Very robust machine for heavy-duty cutting. In 2007, partially overhauled by MMD, geometrically calibrated, mechanically and electrically inspected. “Super machine” for the expert. Delivery: Ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1980, Wheel diameter – max. 1010 mm Wheel width: 0 mm Module – max.: Module – min.: Total power requirement: 15 kW Machine weight approx. 9.5 t Space requirement approx.: G L E A S O N (USA) "CURVIC-Coupling" Grinding Machine Model 120 (888), Year of manufacture 1980, Serial No. 763402 Max. tooth height: 10 mm Max. workpiece swing diameter: 1,010 mm Max. external diameter of CURVIC gearing: 610 mm Retraction of workpiece slide plate: 216 mm Max. distance grinding wheel to workpiece nose: 90–430 mm Max. workpiece weight incl. clamping device: approx. 500 kg Number of teeth: 32–150 Grinding wheel diameter: approx. 152–320 mm Grinding wheel speeds, infinitely variable: 0–3,600 rpm Workpiece spindle bore: 60 mm Total drive approx. 15 kW – 380 V – 50 Hz Fpodpjt Hwniofx Aatei Weight approx. 9,500 kg Accessories / Special equipment: Automatic rough grinding and finish grinding with presettable counters and built-in feed curves Counter for number of teeth Counter for number of dressing cycles 2 mounted dressers with 3 dressing diamonds for external dressing, internal dressing, and tip dressing of the grinding wheel Mounted index plate for 48 teeth Stand-alone coolant unit with belt filter, separate hydraulic unit Stand-alone oil mist extraction unit make TRION, various small parts

Stanje: rabljeno, Leto izdelave: 1977, Grinding diameter - max. 400 mm Grinding width 0 mm Module - max. (not specified) Module - min. (not specified) Total power requirement 3 kW Machine weight approx. 4.2 t Space requirement approx. (not specified) Rack wheel - Ø min./max. 64 - 320 mm Grindable module size 1 - 12 module Rack wheel width max. 40 mm Number of teeth 13 - 240 Rolling arc - Ø 73 - 320 mm Workpiece carriage speed 5 - 20 - 30 - 40 teeth/minute Grinding wheel speed 690 rpm Grinding wheel diameter 762 mm Grinding wheel swivel (engagement angle) 5-21° Grinding carriage swivel (helix angle) 2x 35° Grinding carriage vertical adjustment 240 mm Dressing speed 1/0.5/0.25 m/minute Grinding spindle drive / total drive 1.1 / 3 kW - 380 V - 50 Hz Weight approx. 4,200 kg Accessories / Special equipment: Fpodpfjt Hwnvjx Aatoi The machine is suitable for grinding external and internal rack wheels as well as for grinding master gears and cutter wheels for gear shaping machines. Unfortunately, there are no additional accessories available for the machine, so it is recommended as an investment as a secondary machine if the necessary accessories are already available.

Stanje: rabljeno, Leto izdelave: 1994, Turning diameter 1250 mm Swing diameter 1160 mm Turning height 800 mm Faceplate diameter 1000 mm Total power requirement 97 kW Machine weight approx. 25,000 kg Space requirement approx. m PITTLER Vertical CNC turning and milling center with tool changer and pallet changer Model PV 1250 / 1-1 Year of manufacture 1994 Max. turning diameter 1,000 mm Max. swing diameter 1,160 mm Turning length approx. 800 mm Fpedpfxst Hwy Se Aatei X-axis (horizontal) 1,300 mm Y-axis (vertical) 800 mm Feed rate / rapid traverse 16,000 mm/min Main spindle speed 10 - 1,000 rpm Main spindle speed via separate C-axis 0.1 - 16 rpm C-axis positioning accuracy 360,000° +/- 5'' Tool holder ISO 50 Tool drive 22 kW Max. torque / spindle speeds 315 Nm / 2,500 rpm Pallet size 630 x 630 mm Spindle drive 63 kW Connected load approx. 97 kVA - 400 V - 50 Hz Total weight approx. 25,000 kg Accessories / Special equipment • CNC 3-axis control NUM 760 TX with graphic, menu-guided dialog programming and all standard options, cycles, and subprograms, with tool compensation, thread cutting cycle, constant cutting speed programming, etc. • 2-axis CNC tool slide (1,300x800 mm) with powered toolholder ISO 50 / 22kW • Tool changer with 16 tool pockets (max. length 450 mm, max. 40 kg) • Pallet changing system (pallet 630 x 630 mm) with a setup station with indexing and pallet drive and 2 separate pallet stations • 3 pallets 630 x 630 mm, 3-jaw chuck Ø 650 mm, faceplate Ø 900 mm • Chip conveyor, band filter coolant system, full enclosure (including safety fence for pallet change area), separate control cabinet, operating manuals • Approx. 20 tool holders and various additional accessories Powerful, universal turning and milling center for complete machining (turning, drilling, milling, and threading) with high speeds and high metal removal rates! Condition: good to very good – ready for demonstration shortly Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice. We look forward to receiving your order. Additionally, we have a large selection of modern used lathes under power in stock. Please inquire!

Stanje: rabljeno, Leto izdelave: 1969, Grinding length: 500 mm Grinding width: 200 mm Workpiece height: 250 mm Total power requirement: 5.5 kW Machine weight approx.: 2,500 kg Required space approx.: m J U N G Horizontal Precision Surface and Profile Grinding Machine Fpedpfx Aajt Hwzijtsi Model: HF 50 RD Year of manufacture: approx. 1969 Machine No.: 4082 Maximum grinding length: 500 mm Maximum grinding width: 200 mm Table size: 600 x 200 mm Table speed: 1 – 20 m/min Working height under grinding wheel: approx. 350 mm Grinding wheel dimensions: 225 x 25 x 51 mm Grinding wheel speed, stepless: 1,000 - 4,500 rpm Vertical infeed: 0.001 - 0.01 mm/stroke Grinding spindle drive, stepless: 0.5 to 1.5 kW Total drive: approx. 6 kW - 380 V – 50 Hz Weight: approx. 2,500 kg Accessories / Special Equipment: • This design is particularly suitable for grinding high-alloy tool steels, thanks to the stepless speed range. • Automatic infeed of the grinding slide for both surface and profile grinding tasks, with automatic infeed stop via dial gauge, plus dial indicator mount and dial gauge for height control. • Machine configurable for standard grinding method with and without infeed, with continuous cross feed or table reversal, or for plunge grinding without traverse. • Manual straight dresser mounted above the grinding wheel • Built-on permanent magnetic chuck approx. 400 x 200 mm, tiltable • Separate wet grinding unit with coolant tank and band filter • Separate converter cabinet for stepless speed regulation and cutting speed display • Approx. 3 flanges with and without grinding wheels, motorized rapid grinding head traverse Condition: Good – ready for demonstration under power, partially overhauled by professional company (piston rods, lubrication, infeed, dresser, bellows, etc.) Delivery: Ex-stock – as inspected Payment: Net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1986, Grinding wheel diameter 300 mm Table length 0 mm Table width mm Total power requirement 11 kW Machine weight approx. t Space requirement approx. m Fodpfjt Hwzvex Aatepi Cut-off machine for hard materials Cut-off machine, hand lever, coolant system, 11 kW

Stanje: rabljeno, Leto izdelave: 1978, Presskraft 160 t Hubzahl 40 – 120 Hub/min Blechbreite mm gesamter Leistungsbedarf 40 kW Presskraft 160 to (1.600 kN) Tischaufspannfläche 1.100 x 1.280 mm Fpodpfet Hwz Nsx Aatoi Stößelaufspannfläche 850 x 890 mm Abstand zwischen Stößelführungen 1.120 mm Abstand zwischen den Ständern (unterhalb der Führungen) 1.350 mm Hubzahl stufenlos verstellbar 40 – 120 /min Hubverstellung 30 / 68 / 114 / 160 mm Stößelverstellung motorisch 125 mm Einbauhöhe je nach Hub – ohne Aufspannplatte – 460 – 650 mm mit Aufspannplatte – 340 – 530 mm Zulässige Hubzahl in Relation zum Materialvorschub: Bei 300 mm = 40 – 60 Hübe Bei 150 mm = 120 Hübe Gesamtantriebsleistung ca. 40 kW – 500 V – 50 Hz Gewicht ca. 24.000 kg Zubehör / Sonderausstattung: • FREI / WEINGARTEN Richtapparat Typ AMR 04 So mit nachfolgender Überkopf-Schlaufensteuerung (platzsparend, keine Grube erforderlich). Das Blechband läuft über die Abrollhaspel zum einseitigen Zangenvorschubgerät und anschließend in die Presse. • HEILBRONN Coilabwickelgerät Typ HAEMH 4000/500 S #204753 mit Coilablageplatz, von dem das Coil aufgenommen und gespannt wird. Danach Rückführung in die Ausgangsposition. Max. Coilgewicht 4.000 kg, max. Coil-Ø 1.500 mm, max. Bandbreite 500 mm. • Angebauter Richtapparat für max. Blechbreite 400 mm, Blechführung in der Breite verstellbar, Blechdicke 1 – 3 mm einstellbar. • Automatische Öl-Umlaufschmierung mit Überwachung. • Hydraulische Überlastsicherung, motorische Stößelverstellung 125 mm. • Förderband für die fertigen Pressteile, separater Schaltschrank – modernisiert 1990 –.

Leto izdelave: 1975, stanje: rabljeno, Wheel Diameter – max. 280 mm Number of Teeth – max. 100 Module – max. 6 Module – min. 1 Total Power Requirement: 6 kW Machine Weight: approx. 2,500 kg Space Requirement: approx. __ m H U R T H Automatic Gear Edge Milling Machine for universal use in deburring and chamfering gears Model: ZK 7 - Year of Manufacture: 1975 Serial No.: 26 000 _____ Max. Workpiece Diameter: approx. 280 mm Workpiece Length: approx. 200 mm Module Range for Deburring: 1-6 module for Simplified Shifting: 1-4 module Workpiece Tooth Count: 6 - 100 Workpiece Spindle Bore: 102 mm Horizontal Adjustment of Workpiece Head: approx. 340 mm Vertical Adjustment of Milling Slide: 180 mm Swiveling Range of Milling Slide: 105° Traverse Adjustment of Milling Slide: approx. 300 mm Cutter Speeds: 250-2,800 rpm Cutter Stroke Rates: 30–210/min Adjustable Cutter Stroke: 6–12 mm Milling Spindle Taper: 40 SK Total Drive: approx. 6 kW – 380 V – 50 Hz * Weight: approx. 2,500 kg Accessories / Special Equipment: • Electric workpiece clamping device with collet chuck setup, facility for expanding mandrels, and standard workpiece holder, extensive clamping devices included. Foot switch for clamp release. Fpodpfx Ajt Hw Dksatsi • Mechanical indexing device for tooth numbers, with approx. 20 different indexing plates • Adjustable tooth gap-centering device mounted on the workpiece head • Mechanical collet adapter installed on the tool head for various cutter diameters and types (profile/face/bell cutters, etc.), approx. 50 various used and new cutters included. • Hydraulic working stroke of tool spindle towards the workpiece, with integrated hydraulic unit. • Workpiece counter Condition: Good – demonstration-ready, very interesting due to extensive accessories. Delivery: ex stock – as inspected * Payment: strictly net – upon receipt of invoice We look forward to your order. Approximately 100 different gear cutting machines are still available in stock for selection. Please inquire with us.

Stanje: rabljeno, Leto izdelave: 1971, Pressure: 200 t Clear width: N/A mm Stroke: 180 mm Table length: 690 mm Table width: 530 mm Distance between uprights: 420 mm Total power requirement: 18 kW Machine weight approx.: t Space requirement approx.: m E X N E R Hydraulic four-column press for embossing, coining, backward extrusion, calibrating, and punching (medals) Fodpjt Hw Dwefx Aatjpi Type: H4SP 200 # 1101-20 Year of manufacture: 1971, but has been overhauled several times since then _____ Press force downward: approx. 200 t Return force upward: approx. 20 t Usable table size: 420 x 220 mm Total table size: 700 x 530 mm Distance between columns (front): 420 mm Side distance: 220 mm Die height (table to ram, top): 380 mm Ram stroke: approx. 200 mm Piston/column diameter: 270/120 mm Piston bore: 50 mm Closing speed (ram): — Rapid traverse/load traverse/ram down: 330/10/180 mm/sec Total power requirement: approx. 15 kW — 380 V — 50 Hz Weight: approx. 3,000 kg Machine dimensions (L x W x H): approx. 1.4 x 1.3 x 2.75 m Accessories / Special Equipment - Hydraulic ejector in table with separate pressure regulation - Electric selector switch for continuous stroke/foot release/manual engagement/setup - Large pressure gauge and control lamps to indicate pressure achieved/depth achieved - Press stroke and rapid traverse are set via a switching linkage with limit switches on either side of the press piston - Pressure is controlled via a fine-adjustment pressure valve - Reversal from pressing stroke to return stroke via pressure switch or limit cam - Control cabinet and hydraulic unit, all compactly attached and easily accessible - Previously equipped with automation, but only various pneumatic lines and valves remain

Stanje: rabljeno, Leto izdelave: 1987, x-travel: 500 mm y-travel: 380 mm z-travel: 300 mm Control: FANUC Total connected load: 12 kW Machine weight approx.: 2,300 kg Space requirements approx.: m S T A M A (FANUC) Vertical 3-axis CNC machining center Model: MC 010 Year of manufacture: 1987 # KMH 010 1110 Working area: Longitudinal travel X-axis: 500 mm Vertical travel Z-axis: 300 mm Cross travel Y-axis: 380 mm Table size / working area: 650 x 380 mm Table load capacity approx.: 200 kg Installation height between table/spindle: 240–540 mm Distance to spindle center approx.: 350 mm Tool holder: SK 30 Spindle speeds: 1,500 – 6,000 rpm Feed rates / rapid traverse max.: up to 1,000–4,000 mm / 15 m/min Drilling/milling capacity in steel: 20 mm / 130 cm³ Milling capacity in aluminum: 500 cm³ AC main drive: approx. 3.7 / 5.5 kW Total drive power: approx. 12 kW – 380 V – 50 Hz Weight: approx. 2,300 kg Accessories / special equipment: • Original FANUC control with monitor, all modern subprograms, fault diagnostics, electronic handwheel, RS 232, easy and quick to program directly at the machine, and much more. • Vertical turret head with 10 tool stations, ISO 40, fast tool changeover time approx. 7 seconds chip-to-chip • Programmable rotary table mounted on the machine table (not an additional CNC axis), excellently suited as an indexing table, hydraulic, type RST 2 • Separate coolant unit • Various tool holders, some with tools Ideal machine for productive drilling, tapping and milling in steel and aluminum. Condition: Good to very good – demonstration under power possible Fpsdpet Hw H Ejfx Aatsi Delivery: Immediately from stock, loaded free onto truck Payment: Net – upon receipt of invoice We look forward to your order. We constantly stock a wide range of CNC machining centers of all types – please inquire for alternatives!

Stanje: rabljeno, Leto izdelave: 1994, Workpiece diameter: 110 mm Grinding length: 410 mm Clamping length: 20 mm Total power requirement: 0.25 kW Machine weight approx.: 500 kg Space requirement approx.: S A A C K E Manual Form Cutter – Bevel Grinding Machine Fpjdpfst Hw Nmex Aatsi for grinding form tools made of HSS and carbide profile cutters, etc. (see separate PDF) Model: FSM Year of manufacture: 1994 Serial no.: 172/94 --- Center height of workpiece carrier II approx.: 110 mm Collet chuck for end mills Ø: 0.5 – 30 mm Axial adjustment range of workpiece: 14 mm Template adjustment range: 20 mm Base table: 700 x 800 mm Tabletop height above floor (raised): 900 mm Grinding head: Grinding wheel Ø x bore: 175/125/75 x 51/32 mm Grinding wheel speed via pulley: 3,150-4,500-6,300 rpm Grinding head height adjustment approx.: 65 mm Adjustable clearance angle approx.: 0 – 45 ° Spindle drive/total drive: 0.25 kW – 380 V – 50 Hz Weight approx.: 500 kg Accessories / Special equipment: • Units such as the grinding head slide, workpiece carrier No. 2, and the dressing and setting block can be easily adjusted on an air cushion. All units can be operated or fixed separately via pneumatic valves; they are optimally adjustable for any grinding application due to their placement on a “planar air bearing.” • Workpiece holder A with collet chuck device • Separate workpiece holder B with steep taper 50 mounting, each for alternate installation on the workpiece carrier • Grinding wheel dressing block with diamond and setting gauge • Various collets, approx. 50 pieces in all sizes, other accessories Condition: good – ready for demonstration under power and air Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Leto izdelave: 2002, stanje: rabljeno, Diameter 180 mm Workpiece length 0 mm Workpiece width 1350 mm Total power requirement 65 kW Machine weight approx. 7,500 kg Required floor space approx. m T I M E S A V E R S (Netherlands) Wide Belt Deburring and Finishing Machine Model 41 Series 1350 WRDOW-N Year of manufacture 2002 Serial No. 2313-03 _____ Sanding width approx. 1,350 mm Max. workpiece height approx. 1 – 50 mm Feed speed variable approx. 1 – 10 m/min Comprising the following units: 1.) Vacuum table with flat workpiece feed belt, 780 mm vacuum track in the center of the belt. Belt feed motor approx. 3 kW, frequency controlled for continuously variable feed rate 1 – 10 m/min. Selector switch for forward and reverse belt run, digital display for belt speed and continuous table height adjustment. Suitable for wet processing. 2.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 15/19 kW, belt speed approx. 11-22 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 3.) Vertical sanding/deburring disc (disc brush system) approx. Ø 1200 mm, consisting of self-adhesive nonwoven abrasive in various grades available, specially for deburring and cleaning surfaces as well as for radii rounding on workpieces. Also suitable for workpieces with varying heights. Drive approx. 7.5 kW, disc oscillates motor-driven (2.2 kW) across the entire belt width. 4.) Contact roller approx. Ø 180 mm x 1350 mm wide, drive approx. 18.5 kW, Fodpfx Aet Hw Shjatjpi belt speed approx. 11 m/s with fine height adjustment and pneumatic oscil- lation across the width, various sanding belts included. 5.) Wet processing version = complete coolant system consisting of belt filter unit with pump installed in machine base, rotary union on top of the deburring disc spindle, return of coolant via the vacuum table, and water mist separator above the machine, with blower approx. 5.3 kW. Side doors in V2A stainless steel sheet, oil skimmer, etc. 6.) Side-mounted control panel with clear controls and digital position and speed display. Joystick for feed belt and table adjustment, 3 x ammeters, etc. as well as front and rear workpiece pressure rollers, emergency stop Total drive power approx. 65 kW - 400 V – 50Hz Weight approx. 7,500 kg Required room height approx. 3.50 m Condition: good – available for demonstration under power Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1985, Thread diameter 254 mm Fodpet Hw U Aefx Aatjpi Grinding length 350 mm Thread pitch 51 mm Control SIEMENS S 8 Total power requirement 12 kW Machine weight approx. 5000 kg Space requirement approx. m Internal thread grinding machine with PLC control

Stanje: rabljeno, Leto izdelave: 1998, Grinding length: 800 mm Grinding width: 500 mm Workpiece height: 425 mm Total power requirement: 15 kW Machine weight approx.: 4.5 t G E I B E L & H O T Z CNC cycle-controlled precision surface grinding machine Model: FS 850 GT SL Year of manufacture: 1998 # 101258 _____ Max. grinding length (table longitudinal travel 900 mm): 800 mm Max. grinding width (cross travel 500 mm): 500 mm Fedpfx Ajt Hxameatspi Max. grinding height under wheel: approx. 425 mm Standard magnetic chuck size: 800 x 500 mm Max. table load: 1,100 kg Table speed: 2 – 28 m/min Intermittent cross movement: 3 – 60 mm/stroke Rapid traverse cross & vertical: 4,000 mm/min Grinding wheel size: 400 x 100 x 127 mm Grinding spindle drive approx.: 9 kW Total drive approx.: 22 kW - 400 V – 50 Hz Weight approx.: 4,500 kg Accessories / Special Equipment: • Easy-to-program GEIBEL & HOTZ grinding cycle control • Model SL with standard grinding programs including surface and multi-surface grinding with roughing, finishing, spark-out, return, plunge grinding, dressing automation with compensation, loading station stop – all inputs/parameters via operator panel and function keys • Electronic handwheel for 3 axes • Control based on SIEMENS electronics and SIEMENS OP 25 • Table movement via roller ring screw drive, allowing both very high and very low table speeds with constant torque and high efficiency • Cross and vertical axes driven by ball screw • Diamond dresser on the left side of the table next to the magnetic plate, with automatic dressing cycle, compensation, pull-back, and edge rounding on grinding wheels possible • MPM balancing device for grinding wheel • Mounted permanent electromagnet chuck approx. 800 x 500 mm, fine-pole • Wet grinding system with separate band filter coolant filtration • Complete enclosure with electrically monitored sliding doors • Separate control cabinet, work lamp, various accessories, operation manuals Condition: Good to very good! The wide grinding wheel is suitable for large-area stock removal! Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1985, Drilling capacity in steel (diameter): 30 mm X-travel: 850 mm Y-travel: 435 mm Control: HEIDENHAIN TNC 150 Total power requirement: 16 kW Machine weight approx.: 3,500 kg Space requirement approx.: m F E H L M A N N (Switzerland) CNC-controlled precision drilling and milling machine Model: PICOMAX 100 CNC – 2+ Am Year of manufacture: 1985 16 085109 X-axis (longitudinal): 850 mm Y-axis (lateral): 435 mm Z-axis (vertical): 210 mm Table size: 500 x 1,570 / 390 x 1,280 mm Min./Max. distance vertical spindle - table top: 140 / 690 mm Vertical adjustment of the drill head (motorized): 540 mm Spindle overhang: approx. 450 mm Spindle mount: SF 32 Drilling capacity in steel: 30 mm Vertical spindle stroke (quill): max. 210 mm Spindle speeds (infinitely variable, 2 ranges): 25 – 5,600 rpm Workpiece weight: 600 kg Feed rates XYZ: 1 - 8,000 mm/min Fpjdpst Hxa Hofx Aatji Drilling feeds, 6 automatic: 0.03/0.07 to 0.4 mm/min Rapid traverse XYZ: 4/8 m/min Spindle drive: 6 kW Total drive approx.: 16 kW - 380 V - 50 Hz Weight approx.: 3,500 kg Accessories / special equipment: • HEIDENHAIN CNC 2-axis contouring control, type TNC 150, with color monitor, graphics, all standard subroutines and cycles, tapping cycles, manual control unit or electronic handwheel, RS 232 interface, etc. The drill spindle axis (Z) can be operated manually or via CNC control. • Drilling depth can be preset via a 12-position turret stop, with digital display on the monitor. • Drill head can also be programmed via a height positioning device in 3 preset positions. • Precision coordinate table for X/Y CNC axes with hardened ball screws • Equipped with quick-change tool system, various tool holders, drill chucks, coolant system, etc. Condition: good to very good – demonstrated under power Delivery: ex-stock, as inspected Payment: strictly net, upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1975, Table diameter mm Workpiece height mm Number of wheels 2 Total connected load 11 kW Machine weight approx. 4.2 t Required space approx. m O F F E R We can offer you, ex stock and subject to prior sale and error, without obligation: Fpsdpfsub Al Ijx Aatji HAHN & KOLB double-sided lapping and fine grinding machine Type ZL 800 H Year of manufacture approx. 1975 240 049 _____ Possible lapping/grinding wheel Ø 755 - 810 mm Possible wheel ring width 200 - 265 mm Currently installed wheel Ø / ring width 790 / 245 mm Max. transportation carrier wheel Ø approx. 306 mm Max. distance between cast lapping wheels 125 mm Max. distance between fine grinding wheels 83/78 mm Max. distance between mounting flanges 260 mm Lapping wheel speed upper 30 / 42 / 60 / 84 rpm Lapping wheel speed lower 30 / 42 / 60 / 84 rpm Workpiece carrier wheel central drive 28 / 40 / 56 / 80 rpm Spindle drive each 6 / 8 kW Total drive approx. 11 kW - 380 V - 50 Hz Weight approx. 4,200 kg Special equipment / accessories: • HAHN & KOLB / LAUER measuring and control device with sensor routed through the hollow spindle. The sensor continuously measures during operation and automatically ends the cycle when the target thickness is reached. • Pressure stage adjustment via HELLER hydraulics and grinding phase adjustment via timer possible. • Currently fitted with fine grinding wheels for double-sided high-precision fine grinding of flat-parallel workpieces. • Side-mounted, height-adjustable and swiveling motorized dressing device with electric feed. • Lapping or rinsing agent dosing device with container • Multiple drive and pressure setting options such as: co-rotating / counter-rotating, individual drive, dragging one or both wheels, left/right rotation, etc. • Electrically height-adjustable planetary drive device for the carrier wheels Condition : mild noises in lower gearbox, otherwise in good condition Delivery : ex stock, immediately available, FCA Metzingen Payment : strictly net – payable upon receipt of invoice We have further double-sided lapping and fine grinding machines in stock, please contact us.

Leto izdelave: 2002, stanje: rabljeno, Grinding diameter 10–300 mm Grinding length 650 mm Centre height 175 mm Total power requirement 12 kW Machine weight approx. 3.7 t O F F E R Fpodova I N Uepfx Aatoi We can offer you, ex-stock, subject to prior sale and errors, Without obligation: STUDER (CH) CNC Precision Cylindrical Grinding Machine Model: eco 650 CNC Year of manufacture: 2002 Serial No: 026 Grinding-Ø (approx. min./max.): 10 – 300 mm Centre height: 175 mm Distance between centres / Max. workpiece length: 650 mm Table travel: 800 mm Workpiece weight between centres: approx. 80 kg Slide travels: Longitudinal axis Z (resolution 0.0001 mm) max.: 800 mm Cross axis X (resolution 0.0001 mm): 285 mm Feeds / rapid traverse in Z / X axis: 0.001 – 10,000 / 5,000 mm/min Grinding slide swivelling (fixed angle): 0 & 30° Table swivelling max.: approx. 10° Grinding wheel size (Ø x width x bore): 500 x 80 x 127 mm Grinding wheel speed: 1,760 rpm Workhead - stepless spindle speed: approx. 0 – 1,000 rpm Workpiece spindle mounting: MK 5 Spindle drives: 7.5 kW Total drive: 12 kW - 400 V - 50 Hz Weight: approx. 3,700 kg Accessories / Special features: • FANUC 3-axis CNC control, type 21i-T, with all necessary grinding, measuring and dressing cycles, e.g.: shoulder grinding, plunge grinding, longitudinal grinding, multi-diameter grinding, taper grinding, automatic dressing, etc., including manual control unit with electronic handwheel • C-axis in the workhead for spindle positioning (and non-circular grinding) • Grinding spindle head with grinding wheel on the right, swivellable by 30° • Fixed workhead with MK5 / W 30 mount • Hydraulic tailstock with cylindricity correction, dresser mounted separately on table • Pneumatic support for easier adjustment of tailstock and workhead on table guideway • Various accessories, including various flanges and operating manuals • Partial enclosure with monitored sliding door • Machine bed made of GRANITAN mineral cast Condition: good to very good – ready for demonstration! Video available on request. Delivery: ex stock, as inspected Payment: strictly net, upon receipt of invoice We have a wide range of grinding machines of all types available. Please feel free to enquire!

Stanje: rabljeno, Leto izdelave: 1970, Pressure: 1 t Stroke: 315 mm O F F E R Fpsdev Td Eropfx Aatoi We can offer you—subject to prior sale and errors excepted—ex stock, without obligation: AGEO Manual 4-column spindle press Model: SP 60/650 hy Year of manufacture: 1979 _____ Nominal pressing force: 60 t Maximum achievable pressure: 70 t Spindle diameter: 120 mm Number of guide columns: 4 pcs Table surface: 650 x 550 mm Max. installation height: 430 mm Ram stroke: 400 mm Distance between columns: 650 mm Minimum required height: 2,900 mm Weight approx.: 3,300 kg Accessories / Special features • The 4-column spindle press is a robust and powerful press • Pressing force of 60-70 tons • Table size of 650 x 550 mm and a column spacing of 650 mm • Equipped with a threaded spindle Ø 120 mm Condition: very good – demonstration under power via video link SP 60/4 Delivery: short-term ex stock – as inspected Payment: strictly net – upon receipt of invoice We appreciate your order.

Stanje: rabljeno, Leto izdelave: 2013, Grinding length 800 mm Grinding width 400 mm Workpiece height 375 mm Control system Siemens 840 D Total power requirement 18 kW Machine weight approx. 2.6 t Fpsdpfswd Tx Iox Aatei O F F E R We are pleased to offer you, subject to prior sale and error, from our stock: GEIBEL & HOTZ CNC horizontal surface & profile grinding machine Model FS 840 KT CNC Year 2013 38040513 _____ Max. grinding length (table longitudinal movement 850 mm): 800 mm Max. grinding width (max. cross movement 400 mm): 450 mm Max. grinding height under wheel approx.: 375 mm Table–spindle center distance min./max.: 140 – 525 mm Standard magnetic chuck size: 800 x 400 mm Maximum table load: 700 kg Table speed: 5 – 35,000 mm/min Cross/vertical speed: 5 – 4,000 mm/min Grinding wheel size: 300 x 50 x 76.2 mm (350 x 100 x 76.2) Maximum cutting speed: 45 m/s Grinding spindle drive approx.: 9 kW Total drive approx.: 18 kW – 400 V – 50 Hz Weight approx.: 2,600 kg Accessories / Special Features: • The machine features a simple, freely programmable SIEMENS CNC control, type 840 D SolutionLine, together with additional GEIBEL & HOTZ grinding software. User-friendly operation, with text and graphical support, easy programming even for complex grinding wheel contours, fast linking of grinding operations, and support for all standard grinding cycles. • Electronic handwheel for all 3 axes. • Table movement via ballscrew drive (KT), enabling both very high and very low table speeds, ideal for profile grinding. • Cross-feed (Z) and vertical feed (Y) via ballscrew drive with incremental glass scale. • Diamond dressing unit mounted on the left side of the table (also for profile dressing); additional driven diamond roll dressing device (mountable on table) with automatic dressing cycle including compensation. • HOFMANN balancing unit EasyBalancer EB3100 (with installed speed and vibration sensors) • Currently only small magnetic chuck 110 x 200 mm is available. • Wet grinding system with free-standing belt filter coolant filter • Complete enclosure with electrically monitored sliding doors, free-standing electrical cabinet, work light, various accessories, and operating manuals. Condition: Good to very good! Suitable for all grinding tasks! A video of the machine will be available here soon. Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net - upon receipt of invoice Always a large selection of grinding machines in stock – ask for your requirements!

Stanje: rabljeno, Leto izdelave: 1998, Outreach 290 mm Drilling stroke 180 mm Total power requirement 1.9 kW Fedow D Hi Tspfx Aatepi Description to follow!

Stanje: rabljeno, Leto izdelave: 1986, Drilling capacity in steel (diameter) 32 mm Throat depth 290 mm Drilling stroke 180 mm Total power requirement 1.9 kW Description to follow! Fedpfxjw En D Io Aatjpi

Stanje: rabljeno, Honing diameter: 165 mm Stroke: 120 mm Centre height: 100 mm Total power requirement: 1.5 kW Machine weight approx.: 1 t SUNNEN (USA) Horizontal automatic honing machine Model: MBC 1804 G Year of manufacture: 1K1-90075 Honing capacity – Ø with measuring control: 1.5 – 51 mm with automatic stroke: 1.5 – 95 mm with manual stroke: 1.5 – 165 mm Max. workpiece length approx.: 400 mm Max. workpiece length with measuring control: 254 mm 12 spindle speeds: 200 – 2,500 rpm 5 stroke rates: 80 – 310 strokes/min Stroke length with automatic stroke: 6 – 120 mm Drive of honing spindle/stroke motor: 0.75 / 0.37 kW – 380 V – 50 Hz Total drive power approx.: 1.5 kW – 380 V – 50 Hz Accessories / Special features: • Automatic machining cycle with automatic mechanical stroke, automatic hydro-mechanical expansion of the honing tool, and automatic shutoff upon reaching the target diameter. • Electro-mechanical measuring control opposite the tool spindle for mounting a measuring probe set to the target diameter, which initiates automatic shutdown. • Continuously adjustable expansion pressure • Foot switch for manual operation Fpsdpfxow U U Iqj Aatei • Built-in honing oil supply • Operating manuals. Unfortunately, no toolholders or other accessories available. Condition: Very good condition! Suitable for all honing operations! A video of the machine will be available shortly—please click here. Delivery: ex stock, available immediately, FCA Metzingen Payment: strictly net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 1970, Stružna dolžina 300 mm Teža stroja cca 0,4 t OPIS SLEDI! Fpedpoxmahlsfx Aatei

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, Grinding length: 600 mm Grinding width: 0 mm Total power requirement: 7.5 kW OFFER We can offer you – subject to prior sale and errors excepted – the following, available from stock: GEIBEL & HOTZ CNC Horizontal Surface & Profile Grinding Machine Model: FS 6-Z CNC Year of manufacture: 1996 Maximum grinding length (table longitudinal travel 660 mm): 600 mm Maximum grinding width (cross travel max. 360 mm): 0 mm Maximum grinding height under wheel: approx. 375 mm Distance table – spindle centre min / max: 140 / 525 mm Standard magnetic chuck size: 600 x 0 mm Table clamping area: 820 x 0 mm Maximum table load: 400 kg Table speed: m/min Cross movement / table stroke: 3 - 40 mm Rapid cross/vertical feed: 5 m/min Grinding wheel dimensions: 300 x 50 x 76.2 mm Grinding spindle speeds, adjustable: 1,000 – 3,000 rpm Grinding spindle drive approx.: 7.5 kW Total drive approx.: 15 kW – 400 V – 50 Hz Weight approx.: 2,600 kg Accessories / Special equipment: • SIEMENS CNC Control type 840 D with comprehensive GEIBEL&HOTZ grinding software, user-friendly interface, text and graphic support, easy programming even for complex grinding wheel contours and fast linking of grinding operations • All standard grinding programs and cycles such as surface and multi-surface grinding with roughing – finishing – sparking out – return, plunge grinding, automatic dressing with compensation, etc. • Electronic handwheel for 3 axes • Table movement via toothed belt drive, allowing both very high and very low table speeds, ideal for profile grinding • Dressing device with swing diamond, mounted on left side of table, with automatic dressing cycle, compensation, and for profile dressing as well • Fixed dresser with interchangeable mounting, left side of table • Mounted sine table permanent electro-magnetic chuck approx. 600 x 200 mm, fine-pole Fpedpfx Ajx Haryjatsi • Wet grinding unit with separate band filter coolant filtration • Separate electrical cabinet, work lamp, various accessories, operating manuals Condition: Good to very good condition! Suitable for all grinding applications! Please click here for a video of the machine: Delivery: Ex stock, immediately available, FCA Metzingen Payment: Net – upon receipt of invoice Always a large selection of grinding machines in stock – please let us know your requirements!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1985, Notranji premer 300 mm Fedpfx Aaeyrtvzetopi Globina brušenja 450 mm Premer kroženja 660 mm Opis sledi!