Nakup rabljenih strojev (200.000)

Stanje: rabljeno, Leto izdelave: 1994, x-axis travel: 0 mm y-axis travel: 0 mm z-axis travel: mm Total power requirement: kW Machine weight approx.: t Space requirement approx.: m Marking machine with rotary table (bevel gears), 4 axes, PV 70 head with WINGRAED and WINSMAT software Fpjdpfx Aaet Hw Dqstsi

Stanje: rabljeno, Leto izdelave: 1987, Maximum rolling pressure NA t Workpiece diameter: 38 mm Workpiece length: 500 mm Total power requirement: 24 kW Machine weight: approx. 10 t Space requirement: approx. [dimensions not specified] Max. stroke of the upper/lower tool slides: 760 mm Max. rack length: approx. 610 mm Workpiece length between centers: approx. 500 mm Max. gear/profile width: 92 mm Fpjdpfst Hw D Dsx Aatji Max. workpiece Ø: 38 mm Tailstock stroke on support (hydraulic): approx. 500 mm Module range: 0.3 to 1.3 module Total drive: approx. 24 kW - 380 V - 50 Hz Total weight: approx. 10,000 kg Accessories / Special features: - KBH workpiece feeder, positioned parallel to the machine, currently set up for loading and unloading shaft-shaped workpieces (approx. 16 mm Ø x 200 mm long) with prism conveyor belt and lifting station for 2 shafts (raw/finished part) in the clamping area, including a workpiece position monitoring unit. - Originally used for rolling external gears (Zz = 25) on so-called planetary carriers (automotive): Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. - Various accessories, separate control cabinet, separate hydraulic unit 900 L, integrated coolant system, control panel with plain-text fault display, etc. ROTO FLO machines are ideal for series production of smaller gears/profiles and are significantly more cost-effective than gear hobbing. Workpieces are clamped between centers and formed using synchronized, counter-moving rack tools. Material is displaced and formed by the increasing profile height in the rack tool. In the tool's calibration zone, profile and surface finish are optimized. No profile overrun is required as with milling or shaping. The machine features an exceptionally robust design. Tool life can reach 25,000 to 100,000 pieces, even with helical gears. Condition: very good – set up in our warehouse and ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. Further cold rolling machines and other gear manufacturing machines always in stock.

Stanje: rabljeno, Leto izdelave: 1985, Wheel diameter - max. 80 mm Wheel width 150 mm Module - max. 2.5 Module - min. Total power requirement 10 kW Machine weight approx. 2400 kg Fully automatic gear hobbing machines for worm gearing Type A 33 / 1 Year of manufacture 1985 Serial No. 14.06/14.07/14.15 TECHNICAL DATA: max. wheel (without loading magazine) approx. 80 mm max. wheel (with loading magazine) approx. 50 mm Module max. 2 / 2.5 Axial hobbing length approx. 150 mm max. workpiece installation length approx. 200 mm Hob carriage swiveling up to 90 degrees Cutter diameter 24 - 50/63 mm Hob carriage radial travel max. 0-14/18 mm Fedst Hw D Rjpfx Aatopi Cutter shift max. 25 mm Cutter speeds 212 - 2,000 rpm Axial feed range, stepless 0.05 - 4.0 mm/rev Radial, stepless 0.2 - 200 mm/min Hob spindle drive 3 kW Total drive approx. 10 kW - 50 Hz - 380 Volt Weight approx. 2,400 kg Accessories / Special features: Fully automatic operation sequence and minimal secondary times through freely programmable SIEMENS program control S 5 for all machining steps such as rapid traverse, feed, cutter on/off, for the loading device, tailstock, possible shifting, etc., with piece counter, program numbering, and with 30-step numerical error display. Pneumatic workpiece loading and unloading device parallel to the workpiece axis for shaft-shaped workpieces approx. 140 mm long x 8 mm Ø, with pneumatic double gripper for loading and unloading the workpieces; raw parts are placed outside in exchange cassettes and inserted into the loading device. The double gripper brings the parts between workpiece spindle and tailstock, the tailstock quill pushes the parts into the main spindle collet and clamps them simultaneously. Finished parts are ejected from the main spindle and returned by the gripper to the (finished parts) cassette. The entire process is electrically monitored and controlled. The complete loading device is enclosed with Plexiglas. Hydraulic workpiece clamping device with collets and hydraulic ejector Separate coolant system with magnetic separator * separate hydraulic unit * various change gears Condition: Good - 3 machines available, currently 1 machine ready for demonstration under power, The machine is set up for gearing of worm shafts/armature shafts used in adjustable gear units for car seats, window regulators, etc.

Stanje: rabljeno, Leto izdelave: 1977, Maximum wheel diameter: 400 mm Wheel width: 280 mm Module - min.: 1 Module - max.: 4 Total power requirement: 15 kW Machine weight: approx. 6,000 kg Space required: approx. ___ m L O R E N Z Universal Gear Hobbing Machine Model: F 400 Year: 1977 Serial No.: 8687 Wheel diameter min./max.: 400 mm Module range: 1 - 4 Number of teeth approx.: 8 – 210 Hobbing width approx.: 280 mm Maximum workpiece installation length approx.: 450 mm Swivel range of hobbing slide: up to 60° Cutter size (diam. x length): 160 x 220 mm Fsdpfx Ast Hw Hxeatepi Maximum cutter shift: 180 mm Cutter speeds: 125–500 rpm Table diameter x bore: 375 x 80 mm Feed ranges: axial 0.31 – 4.00 mm/rev radial 0.12 – 1.60 mm/rev tangential 0.035 – 4.5 mm/min Hob spindle drive approx.: 8 kW Total drive approx. max.: 15 kW – 380 V – 50 Hz Weight approx.: 6,000 kg Accessories / Special Equipment: • Various selectable hobbing programs for climb and conventional cutting, and for radial/axial processes, possibly for worm hobbing • Universal hobbing head with cutter shift • Hydraulic workpiece clamping in table and hydraulic tailstock • Hydraulically swiveling counter-holder connection for easier loading • Differential for helical gearing • Stepless speed adjustment, speed and ampere display • Change gears, various accessories, coolant system • Very robust construction Condition: good – to be demonstrated shortly Delivery: ex-stock – as inspected Payment: upon receipt of invoice, strictly net

Stanje: rabljeno, Leto izdelave: 2001, Press force 0.2–40 t Max. workpiece diameter: 70 mm Thread length: 120 mm Control system: Total power requirement: 29 kW Machine weight: approx. 9.5 t Space requirement: approx. m Offer We are pleased to offer you, subject to prior sale and errors in technical specifications, from our stock: PROFIROLL – BAD DÜBEN (Germany) CNC Thread, Gear, and Profile Rolling Machine Model: ROLLEX Year: 2001 Rolling force, steplessly adjustable: 0.2–40 tons Rolling spindle diameter: 120 mm Max. workpiece diameter (approx.): 70 mm Each spindle drive: approx. 8.5 kW Fjdpfx Aet Hw N Toatjpi Total connected load: approx. 29 kW – 400 V – 50 Hz Weight: approx. 9,500 kg Accessories / Special Features: • The machine is equipped with a modern CNC control system developed by the manufacturer. All relevant process and workpiece parameters can be entered, allowing quick and easy changeover for different workpiece sizes (changeover time). All process parameters are graphically displayed on the monitor, providing the user with an optimized process cycle. • Integrated (workpiece) center rolling device for shaft-shaped workpieces (such as gear shafts) with center holes, including a clamping device and prismatic positioning fixtures for pre-aligning the workpiece before clamping, as well as a motorized (driven) tailstock center on the front side of the workpiece. The workpiece slide stroke is approx. 500 mm—thus, the workpiece is clamped and hydraulically moved between the two rolling tools. • Hydraulic oil chiller, separate electrical cabinet, CNC control panel, etc. • Transparent safety enclosures in the working area. Centralized lubrication.

Stanje: rabljeno, Leto izdelave: 1998, Swing diameter 200 mm Turning length 400 mm Control system SIEMENS SINUMERIC 840 C Total power requirement 40 kW Machine weight approx. 6,500 kg Space requirement approx. m I N D E X CNC lathe with 2 turrets, bar feeder and workpiece handling system, and SIEMENS CNC control type 840 C Type G 200, year of manufacture 1998 #810 728 _____ Bar capacity approx. 42 mm Workpiece swing diameter approx. 400 mm Chuck diameter 200 mm Turning length / centre distance approx. 400 mm Turret slide travel Z1 (longitudinal) / X1 (cross) 400 / 120 mm Turret slide travel Z2 (longitudinal) / X2 (cross) 400 / 105 mm Feed force for Z/X axis 15 Nm Rapid traverse speed, tool turret 1 & 2 22.5 m/min Turret tool stations / max. speed 14 x VDI 30 / 6,000 rpm Spindle speeds / tool speeds up to max. 7,000 rpm Maximum spindle torque 95 Nm Spindle drive / tool drive 20 / 5.5 kW Total drive approx. 40 kW - 400 V - 50 Hz Weight approx. 6,500 kg Accessories / Special equipment: • SIEMENS CNC 7-axis contouring control, type SINUMERIC 840 C, for the following axes: Turret 1 and Turret 2, C-axis, sub-spindle axis and C-axis sub-spindle, and workpiece handling type WHU with 2 linear axes and all standard options, flexible hand-held control unit, • C-axis for main spindle as well as automatic spindle switching and alignment device, • 1 sub-spindle with drive and C-axis, travel approx. 300 mm • INDEX bar loader type MBL for bars up to 3 m in length • Hydraulic collet clamping device on main and sub-spindle • 2 x tool turrets with 14 stations for VDI 30 tool mounting and 14 powered tool positions for milling and drilling operations, various tool holders, drill breakage detection in the chuck area, ideal for cross-drilling (!) • Workpiece handling system type WHU with linear gripper but without storage system • Mobile chip conveyor with coolant system, sliding door, fire extinguishing system, Fpjdpfst Hw Rkox Aatji • Driven angular tools, approx. 20 pcs. in total, etc. Condition: good to very good – under power, ready for demonstration Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice.

Stanje: rabljeno, Leto izdelave: 1995, Wheel diameter – max. 80 mm Fjdpfx Aast Hw R Djtspi Wheel width 120 mm Module – max. 3 Module – min. 1 Control unit SIEMENS 840 C Total power requirement 30 kW Machine weight approx. 7,500 kg Space requirement approx. ___ m LIEBHERR CNC-controlled gear hobbing machine Model LC 82 Year of manufacture 1995 # 0836 _____ Max. wheel diameter: 80 mm Module: 1 – 3 Helix angle: +/- 45° Distance from table center to tool center: 15 – 160 mm Vertical travel of milling slide: 250 mm Shifting/Tool traverse path: 180 mm Min. number of teeth: 3! Cutter diameter x length approx.: 90 x 200 mm Cutter speeds up to max.: 800 rpm Feed rates (axial/radial/tangential): 20/4/5 mm/rev Maximum workpiece clamping length: 250 mm Spindle drive approx.: 8 kW Total drive approx.: 30 kW – 400 V – 50 Hz Total weight approx.: 7,500 kg Accessories / Special features • SIEMENS CNC control system Type 840 C for 6 axes (i.e., cutter drive / table drive / swiveling angle of milling head / axial feed / radial feed / tangential feed), with gear-cutting-specific operator interface and diagnostic functions for fast troubleshooting. • Equipped for automatic threading of the hobbing cutter into the tooth gap • Automatic shifting of the cutter axis • Automatic workpiece loading system SSL = rapid-swing loader with mechanical step gearing and cam disk for fast loading cycles. Features triple rotary gripper for blank picking / machining position / unloading. Current workpiece size Ø 30 x 120 mm, helical gearing (pinion) • Workpiece feed is via a plate-chain conveyor (PKB) for transporting workpieces with frictional engagement using workpiece carriers. Additional conveyor belt for blanks and finished parts • Chip conveyor, complete working area enclosure, intermediate coolant tank with pump Complete enclosure of the working area with sliding door and oil mist extraction, etc. Machine can also be used for dry gear cutting. Condition: satisfactory to good – under power and ready for demonstration, compact construction! Delivery: ex stock – as inspected Payment: net – upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1992, Offer in progress! Fpsdpswh Uhfjfx Aatoi

Stanje: rabljeno, Leto izdelave: 2006, x-travel 320 mm y-travel 240 mm z-travel 300 mm Total power requirement 3 kW Fjdpfx Aewp S Sdoatepi Machine weight approx. 1 t O F F E R We can offer you, subject to prior sale and errors excepted, from stock, without obligation: STIMIN Universal Tool Milling Machine with Digital Readout Model FUS-22-2M Year of manufacture 2006 539 _____ Working area: Longitudinal travel X-axis 320 mm Cross travel Y-axis 240 mm Vertical travel Z-axis 300 mm Clamping surface 320 x 670 mm Table load capacity approx. 75 kg Tool holder SK 40 18 spindle speeds 45 – 2240 rpm Quill stroke 60 mm Feeds X / Y - axis, stepless 2 - 1,600 mm/min Feeds Z - axis, stepless 2 - 1,000 mm/min Spindle drive power 1.5 kW Total drive approx. 3 kW - 400 V – 50 Hz Weight approx. 1,000 kg Accessories / Special Equipment: • Manual handwheels on all 3 axes for conventional milling • Additionally equipped with a digital readout (ACU RITE) for all 3 axes • Fixed angle table 320 x 670 installed • Swivel-type vertical milling head, + / - 90° tiltable • Rigid machine structure with sturdy design • Work light, coolant device, swiveling control panel, chip tray, operating instructions • The universal milling machine also complies with CE standards, making it particularly suitable for training workshops or other businesses. Condition : Very good condition! With manual operation, this is the ideal machine for training workshops or small batch production! Delivery : ex stock, immediate, FCA Metzingen Payment : strictly net - after receipt of invoice Click here for a video of the machine: We always have a wide selection of conventional and CNC milling machines in stock!

Stanje: rabljeno, Leto izdelave: 2010, Machine weight approx. 0.2 t O F F E R Fodpfxswr Etyo Aatepi We can offer you, without obligation and subject to prior sale and errors, ex stock: B R Ü N I N G H A U S Air Cushion Machine Model AP502 Year of manufacture: approx. 2010 ----- Dimensions: (LxWxH) 1,600 x 767 x 1,292 mm Compressed air connection: NW 10/4 - 8 bar; max. 82 Nl/min (during cushion production); max. 3.5 Nl/cycle Electrical connection: 230 VAC; 50/60 Hz; 16 A; 2.0 kVA Film material: PA/PE composite film or polyethylene film (100% recyclable) Weight: 230 kg Output: 25 – 49 cycles/min (depending on film type and cushion size) Power supply: 230 VAC, 50/60 Hz, 16A Power consumption: 1.1 kWh Accessories / Special features: • Saved programs for various cushion sizes • Program change at the push of a button • Individual production with defined fill level from 4 cm to 16 cm length • 10 programs available to store several parameters • Small footprint (1600 x 767 x 1292 mm) We would also like to point out that, if interested, we have similar packaging machines in stock on site! Condition : Very good Delivery : ex stock - as inspected Payment : strictly net - upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1989, Saw blade diameter: 320 mm Cutting diameter: 140 mm Total power requirement: 3 kW Machine weight: approx. 0.5 t O F F E R We can offer you, subject to prior sale and errors, from stock, without obligation: EISELE Circular Saw for Straight and Mitre Cuts Type: VMS III-S-PV Year of manufacture: 1989 _____ Max. saw blade Ø: 320 mm Cutting range: tubes approx. 130 mm tube material approx. 130 mm flat material 200 x 100 / 140 x 100 mm solid material (square) 120 mm Mitre cuts may result in slightly reduced cutting sizes. Up to max. 140 mm Saw carriage stroke, manual vertical: approx. 200 mm Saw blade speed: 17–34 rpm Saw blade drive: approx. 2/2.6 kW Total drive: approx. 3 kW – 380 V – 50 Hz Weight: approx. 500 kg Accessories/Special equipment: • Saw head can be angled for mitre cuts at 30 / 45 / 90°, adjustable via scale • 2-speed pole-changing three-phase motor, max. 2.6 kW drive • Saw carriage feed is manual, with a long and adjustable lever • Manual workpiece vice, jaw width: approx. 120 mm • Integrated coolant system with chip tray • Roller conveyor material feed, approx. 2,000 mm • 2 spare saw blades Condition: very good – ready for demonstration Fpodpfx Ajw Dvivsatoi Delivery: ex-stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. We also have larger EISELE cold circular saws and other (band, bow, cold circular) saws in stock. Further sawing machines always available – please inquire with us.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Wheel diameter - max. 400 mm Machine weight approx. 4 t O F F E R We can offer you the following, subject to prior sale and error, without obligation, from stock: KLINGELNBERG Single- & Double-Flank Gear Rolling Tester with Structure-Borne Noise Testing Model R 30 Year of manufacture 2007 _____ Workpiece - Outside diameter min. / max. 36 /300 mm Center distance workpiece – master gear 135 - 290 mm Max. spindle speed 3,000 rpm Fjdjxvdryepfx Aatepi Max. drive torque up to 2196 rpm 20 Nm Max. drive torque 2196 – 3,000 rpm 14.7 Nm Spindle drive 4.62 kW Total drive power approx. 10 kW - 400 V - 50 Hz Weight approx. 4,000 kg Accessories / Special Equipment • The machine is a universal gear roll testing machine designed for the following test procedures: o Single-flank roll testing o Double-flank roll testing o Structure-borne noise testing in single & double flank contact o Helix testing in double flank contact • WINDOWS PC control for measurement data acquisition and analysis, with NoisyS32 test software • SIEMENS operator panel for machine control and test cycle evaluation • Complete enclosure with electrically monitored sliding doors • Attached control cabinet, various accessories, operating manuals • Currently, the “license dongle” for activating the measurement software is unfortunately missing. We hope to still obtain this from the seller. Condition: Very good! Barely used! Coming soon: Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net - upon receipt of invoice Always a large selection of gear cutting machines in stock – please inquire for your requirements!

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Dolžina mize 175 mm Širina mize 110 mm Premer brusnega kolesa 500 mm Skupna potrebna moč 1 kW Fedpfx Aoxvdr Teatopi Teža stroja cca 1,5 t

Leto izdelave: 2008, stanje: zelo dobro (rabljeno), Power 13 kW Clamping range 500 mm Fedpfsxx A Edjx Aatjpi Voltage 400 V O F F E R We are pleased to offer you, without obligation and subject to prior sale and errors: H U G O – B E C K Shrink Tunnel Model SLB 5012/25 Year of manufacture: approx. 2008 _____ Performance: 5–30 m/min Passage width: 500 mm Passage height: 350 mm Temperature: 250°C max. Heating power: 12 kW Current consumption: 24 A Connection: 400/23 V Connected load: 13 kW Weight: 420 kg Machine dimensions (W x L x H): 1220 x 1660 x 420 mm Accessories / Special equipment: • Precise heating control for uniform film shrinking • Variable temperature control for different materials and film thicknesses • Adjustable air speed for various shrink processes • Automatic shutdown in case of overheating or malfunction We would like to inform you that we also have similar packaging machines available from stock upon request! Condition : Very good Delivery : ex-stock – as inspected Payment : net – upon receipt of invoice

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Grinding length 500 mm Fpodsxy S Dxepfx Aatsi Grinding width 250 mm O F F E R We can offer you, subject to prior sale and errors, from stock, without obligation: ABA Universal Surface Grinding Machine “made in Germany” Model easyGrinder 5 Year of manufacture 2015 _____ Max. grinding length (table longitudinal travel 600 mm) 500 mm Max. grinding width (cross travel max. 300 mm) 250 mm Grinding height under wheel with / without magnetic chuck 400 / 420 mm Max. vertical travel 550 mm Distance table – spindle center min. / max. 100 / 650 mm Magnetic chuck size 500 x 250 mm Max. table load 400 kg Table speed 2 – 30 m/min Max. cross/vertical feed rate 500 / 1,700 mm/min Grinding wheel dimensions 300 x 50 x 76.2 mm Max. grinding spindle speed 1,450 rpm Grinding spindle drive approx. 5.5 kW Total drive approx. 8 kW – 400 V – 50 Hz Weight approx. 3,000 kg Accessories / Special Features: • ABA proprietary program control with touchscreen color display for surface and plunge grinding. Intuitive operation using graphic-assisted input and teach-in procedures for manual and automatic grinding cycles – especially suitable for workshop operations! • Portable control panel allowing adjustments during automatic operation • Table motion via toothed belt drive – ideal for fast grinding of smaller workpieces • Feed (Y-axis) via ball screw, linear guides on all axes • Table-mounted dresser with automatic dressing cycle, including compensation • BRAILLON magnetic chuck EPEFINE2 500 x 250 mm, fine pole division and adjustable holding force • Fully enclosed work area with electrically monitored sliding doors • Wet grinding system with separately positioned band coolant filter and oil mist extraction unit • Modern LED lighting, various accessories, operating manuals • Compact design: 2,130 x 1,780 x 2,300 mm (plus oil mist extraction unit) Condition : Very good condition! Suitable for all grinding applications! Please click here for a video of the machine: Delivery : ex stock, immediate availability, FCA Metzingen Payment : strictly net – upon receipt of invoice Always a large selection of grinding machines in stock – please inquire about your requirements!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1990, Description to follow! Fedoxzk Iljpfx Aatjpi

Leto izdelave: 2006, stanje: zelo dobro (rabljeno), Description to follow! Fedpfxsxy S Eco Aatspi

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), O F F E R We can offer you, subject to prior sale and errors excepted, the following from stock, without obligation: D E G E N Manual Cutting, Pointing, and Cylindrical Grinding Machine for Ejector Pins Type T Year of manufacture 1990 _____ Centre height of grinding carriage approx. 200 mm Grinding wheel Ø x bore 200 x 30 mm Grinding wheel speed approx. rpm Grinding wheel drive power approx. kW Fpedpfx Ajxzuuveatei Centre height of workpiece headstock 160 mm Workpiece headstock longitudinal adjustment approx. 100 mm Workpiece headstock cross adjustment approx. 200 mm Workpiece headstock swivels approx. 2 x 30 ° to each side Collet clamping range 0.5 – 20 mm Weight approx. 500 kg Accessories / Special features: • Workpiece headstock swivels for pointing or deburring • Collet chuck with approx. 10 different collets • Plexiglass safety cover for grinding wheel • Compact, mounted on a sturdy base • Possibly with cross-slide feed device Condition: good to very good - ready for demonstration under power Delivery: ex-stock - as inspected Payment: strictly net - upon receipt of invoice We look forward to your order. Further tool grinding machines in stock – please inquire!

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, O F F E R We can offer you, subject to prior sale and errors excepted, ex stock, without obligation: EISELE Circular Saw Machine for Straight and Mitre Cuts Model: VMS 370 Year of manufacture: 2000 _____ Maximum saw blade diameter: 370 mm Fpodex A H Rrepfx Aatji Cutting capacity: Tubes approx.: Ø 130 mm Flat material: 200 x 100 / 140 x 100 mm Solid material, square: 120 mm Mitre cuts may achieve slightly reduced cutting dimensions, up to a maximum of 140 mm. Manual vertical saw carriage stroke: approx. 200 mm Saw blade speeds: 17–34 rpm Saw blade drive approx.: 2 / 2.6 kW Total drive power: approx. 3 kW — 380 V — 50 Hz Weight: approx. 500 kg Accessories/Special equipment: • Saw head adjustable for mitre cuts at 30° / 45° / 90°, scale indicated • Pole-changing three-phase motor with max. 2.6 kW power • Manual carriage feed with long, adjustable lever • Manual workpiece vice, jaw width approx. 120 mm • Integrated coolant system with chip collection tray • Roller table material feed, approx. 2,000 mm • New saw blade installed, 2 spare saw blades included • Electrical system recently renewed Ideal machine for metal fabrication and locksmith workshops. Condition: very good – demonstration ready – very smooth running Delivery: ex stock – as inspected Payment: strictly net – upon receipt of invoice We look forward to receiving your order. We also have further, larger EISELE cold circular saws and other (band/hacksaw/cold circular) saws in stock. Further sawing machines available at all times – please enquire.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Skupna potrebna moč 5,5 kW OPIS SLEDI! Fpedpfx Aeyiu N Reatji

Stanje: zelo dobro (rabljeno), Premer žice - maks. 2 mm Fpedpsyrhmnjfx Aatji Opis sledi!

Stanje: rabljeno, Leto izdelave: 1997, Wheel diameter – max. 215 mm Wheel width – 40.65 mm Module – max. Total power requirement – 20 kW Machine weight – approx. 10 t G L E A S O N (USA) CNC grinding machine for spiral and hypoid bevel gears Model: PHOENIX HG 200 Year of manufacture: 1997 Maximum outside diameter of workpiece: 215 mm Tooth profile size (height x width): 16 mm x 40.65 mm Number of teeth range: 5 – 200 Maximum gear ratio: 1 : 10 Fjdot Hwxhspfx Aatopi Grinding wheel diameter: 51–190 mm Grinding wheel speed: 1,000 – 6,000 rpm X-axis (horizontal): 152 mm Y-axis (vertical): 178 mm Z-axis (base plate): 304 mm Distance from machine center to workpiece spindle face: 115 mm Axis traverse speed: 125 mm/sec Workpiece spindle speed: 0–30 rpm Workpiece spindle bore (tapered): 3 29/32 inch Total drive: approx. 20 kW – 380 V – 50 Hz Weight: approx. 10,000 kg Accessories / Special features: • FANUC 7-axis CNC control type 150 MB with monitor and direct input, automatic calculation of all workpiece and grinding parameters • Large, high-spec coolant system with filtration, band filter, etc. • Powered grinding wheel dressing device with CNC dressing control for automatic compensation of form and diameter after each dressing cycle • Gear grinding can be performed either as a single-part process with conical cup wheel (Gleason 30°) or using a cylindrical cup wheel. Grinding wheels can be made of CBN or conventional 'dressable' aluminum oxide wheels (cost-based choice). Grinding with a conical wheel offers advantages regarding heat generation and contact pattern quality. Thus, these bevel gear pairs (automotive industry) can be produced in high quality, with consistent accuracy, cost-effectively and with short setup times. For further details, see brochure copy on our website. Condition: very good – under power and ready for demonstration Delivery: ex stock – as inspected Payment: net – upon receipt of invoice We look forward to receiving your order. Further gear machining equipment in stock at all times.

Stanje: rabljeno, Leto izdelave: 1985, Pressure 63 t Clear width 1350 mm Stroke 300 mm Total power requirement 16 kW Machine weight approx. 10 t Space requirement approx. 2.0 x 1.8 x 3.4 m H Y D R A P Hydraulic double-column press (embossing press with sliding table) Model HPDb 63 Year of manufacture: 1985 Serial No. H 40/5273 Press force (top ram): 63 t Return force: 7 t Stroke approx.: 300 mm Table size: 1200 x 500 mm Ram plate: 1200 x 500 mm Max. installation height (without exchange device): approx. 400 mm Stroke speed up / down (at full load): 400/400 or 16 mm/sec Clearance between columns (front): 1350 mm Clearance between columns (side): 350 mm Ejector in ram, force/stroke: 1.2 t / 19 mm Pump drive: 11 kW Total drive approx.: 16 kW – 380 V – 50 Hz Weight approx.: 10,000 kg Fodpot Hwxusfx Aatspi Machine dimensions (W x D x H): 2.0 x 1.8 x 3.4 m (+ swing table) Accessories / Special Features Sturdy double-column frame press with adjustable four-point prism guides, equipped with: • Hydro-pneumatic sliding table (approx. 625 mm transverse stroke) with two clamping surfaces for holding the pressed parts and lower tool. These are positioned under the ram for the pressing process and then moved to a stacking device at the rear after pressing. The table then returns to the starting station. This feature can also be easily removed or modified. • CNC press control (Siemens S5) with monitor for input of all relevant process data and storage of tool data for easier and quicker machine changeovers, as well as monitoring of part transport. Swing table holder included. • SICK light barriers fitted at the front of the press and loading station. • Ram equipped with electro-motorised depth stop (300 mm stroke) and hydraulic tool clamping system, also with hydraulic ejector integrated. • Pressure and oil temperature display, piece counter, foot switch, two-hand operation, central lubrication, hydraulic oil circulation cooling, stand-alone electrical cabinet, etc. The machine was used for pressing in edge trims on cylinder head gaskets. Condition: Good to very good – ready for demonstration, under power Delivery: ex stock, as inspected Payment: strictly net, upon receipt of invoice

Stanje: rabljeno, Leto izdelave: 1997, x-travel 800 mm y-travel 400 mm z-travel 350 mm Total power requirement 40 kW Machine weight approx. 8 t Space requirement approx. m CNC-controlled vertical machining center for bar processing. For 5-axis machining of complex shapes at any angle with maximum productivity and precision, Type MC 530 SM Year of manufacture 1997, #530 1195 TECHNICAL DATA: Bar diameter / profile size x max. length: 60 x 800 mm (!) Milling slide travel longitudinal X-axis: 800 mm Milling slide travel transverse Y-axis: 400 mm Milling head travel vertical Z-axis: 350 mm Workpiece axis rotation/swivel: 360° / 120° Mounting height under vertical spindle approx.: 300 mm Spindle taper: HSK 63 Fedpfx Aajt Hwx Ietopi Spindle speeds continuously variable: 36 – 10,500 rpm Feed rates, all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 14 to 32 kW Total drive: 40 kW - 380 V - 50 Hz Weight approx.: 8 t Accessories / Special equipment: CNC path control FANUC type 16 MB, for all 5 axes with monitor and direct input, various subprograms, tool corrections, tool monitoring, parallel programming, 3-D and helical interpolation, and much more. IRCO bar loading magazine mounted on the left of the machine, for up to 10 bars with a diameter of 60 mm. Mounted CNC rotary/swiveling unit with collet chuck system for holding bar stock in combination with hydraulic tailstock as counter support. Automatic tool magazine with 42 tool stations, Ø 100 x 200 mm length. Tools also with internal coolant (IKZ), with separate tool data management, chip-to-chip 4 sec. Tool breakage monitoring via laser light barrier, etc. Pneumatically retractable finished part catcher between workpiece head and tailstock; conveyor belt for parts removal without opening the work area. Fully enclosed work area, chip conveyor installed, but without coolant supply (central provision). Thread cutting possible without compensating chuck, no toolholders included. Very robust machine.

Stanje: rabljeno, Leto izdelave: 2000, x-axis travel: 800 mm y-axis travel: 500 mm z-axis travel: 510 mm Fsdpfx Aaet Hwyretspi Total power requirement: 60 kW Machine weight: approx. 10 t Required floor space: approx. [ ] m CNC-controlled vertical machining center for bar machining. For 5-axis machining of complex shapes at any angle with maximum productivity and precision, Model: MC 535 SM Year of manufacture: 2000, # 535 1108 TECHNICAL DATA: Bar diameter/profile size x maximum length: 80 x 800 mm (!) Longitudinal milling slide travel, X-axis: 800 mm Transverse milling slide travel, Y-axis: 500 mm Vertical milling head travel, Z-axis: 510 mm Workpiece axis rotation/swiveling: 360° / 120° Mounting height under vertical spindle: approx. 350 mm Spindle taper: HSK 63 Spindle speeds, steplessly adjustable: 36 – 10,000 rpm Feed rates all 3 axes: 1 – 10,000 mm/min Rapid traverse: 40,000 mm/min Spindle drive: 22 to 32 kW Total drive: 60 kW – 380 V – 50 Hz Weight: approx. 10 t Accessories / Special equipment: CNC path control FANUC Type 16iM, for all 5 axes, with monitor, direct input, various subprograms, tool correction, tool monitoring, parallel programming, and much more Bar loading magazine mounted on the left side, holds up to 10 bars Ø 80 mm Built-in CNC rotary-swivel unit with collet chuck for holding bar material, combined with hydraulic tailstock as counter support Automatic tool magazine with 66 positions, Ø 125 x 300 mm Tools also with ICS, dedicated tool data management, chip-to-chip 4 sec. Tool breakage control via laser light barrier, etc. Grip and swivel unit for holding the workpiece during 'cut-off milling', to detach it from the remaining bar and deposit it as a finished part on a conveyor Completely enclosed working area, chip conveyor built in, but no coolant system Probe system for workpiece measurement possible, water-cooled milling spindle, various collets, no tools included Very robust machine.