Nakup rabljenih strojev (91)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Throughfeed Moulder with 4 Spindles Number of spindles: 4 Spindle arrangement: bottom, right, left, top, bottom Working width: 13 - 230 mm Working height: 6 - 120 mm Feed speed: 8 m/min Feed motor power: 1.5 kW Spindle diameter: 40 mm Spindle speed: 6,000 rpm Spindle axial adjustment range: 30 mm Planer spindle adjustment range: 5 mm Planer spindle motor power: 5.5 kW Top spindle motor power: 4.5 kW Vertical spindle motor power: 7.5 kW Engines are braked Feed roller diameter: 140 mm Length of infeed table: 2,000 mm Pneumatic pressure for feed rollers Feed roller before first bottom spindle, pneumatically actuated Left pressure roller in front of machine infeed CE compliant Including 4 pcs. planing heads Cgodpfxjy Enlfo Afdow Dimensions approx. L x W x H = 3,000 x 1,250 x 1,550 mm Weight approx. 1,000 kg Note on used machines: • Technical data subject to errors and prior sale. • Specified prices are ex location - free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers may inspect the machine onsite. • Special agreements are valid only in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: novo, Univerzalni drobilnik za les, palete, lesonitne plošče in ostanke, furnirje, MDF plošče, PVC,... SPLOŠNO: Siemens® PLC krmiljenje z zaslonom na dotik ReSmart™ inteligentni krmilni sistem (opcijski daljinski dostop) ReBoost™ funkcija – variabilna hitrost potisnega vozička za optimalno zmogljivost ob največjem prihranku energije ReMotion™ segmentno dno za linearno gibanje potisnega vozička, preprečeno zagozditev Vsi obrabni deli so na voljo v izjemno odporni HARDOX jekleni kakovosti (SSAB Švedska) Masiven, relativno velik dovodni lijak Robusten potisni voziček, premikan s težkim hidravličnim cilindrom Standardni rotor z velikim premerom, rezila iz kaljenega jekla Opcijski ‘W’ rotor in dimenzije rezil 30 x 30 ali 40 x 40 mm Kaljena, ob strani rotorja nameščena čistilna rezila – enostavna menjava Kaljene rezalne letve – dvostransko uporabne, enostavna menjava Pogonski motorji evropske industrijske kakovosti in v treh stopnjah moči Pogon motorja v zvezda-trikot postavitvi, zagon preko zaslona na dotik 2 leti ali 2000 delovnih ur ROBUST garancije TEHNIČNI PODATKI: Moč motorja: 22,0 kW Dolžina rotorja: 650 mm Premer rotorja: 270 mm Št. vrtljajev rotorja: 80 – 120 min⁻¹ Št. rezil: 28 kosov, kvadratna, brušena Št. čistilnih rezil: 2 kosa Premer sita: po izbiri, okrogle in kvadratne luknje Kapaciteta: 5 – 8 m³/h (odvisno od materiala) Odprtina lijaka: 1446 x 1342 mm Odprtina drobilnika: 1410 x 850 mm Količina hidravličnega olja: 30 l Dimenzije (d x š x v): 1920 x 1550 x 1790 mm Teža: pribl. 1750 kg MOŽNOSTI: - Moč motorja 30 kW - 2. rezalna letev HARDOX - Zobati profil na potisnem vozičku - HARDOX materialno sito Cgjdpfshbdg Usx Afdsw - Zmogljivejši menjalnik - ReBoost™ hidravlična enota - Dovodni lijak po želji kupca - ReSmart™ z daljinskim dostopom & servisom - SET kaljenih rezil - Cenik vseh razpoložljivih možnosti na zahtevo (Na povpraševanja odgovarjamo le, če navedete svoj naslov in telefonsko številko!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Brand: HOLZ HER Model: SPRINT 1310 - CE Standard Automatic edge banding machine with cartridge-based glue application system for processing wood, PVC, ABS, and veneer edges. Suitable for furniture manufacturing, panel processing, custom productions, kitchens, bathroom furniture, joineries, and much more – CE compliant. Technical specifications: Min./Max. panel height: 6 – 45 mm Edge thickness: 0.4 – 6 mm Maximum glue height: 51 mm Minimum panel width: 60 mm Minimum panel length: 180 mm Feed speed: 8 m/min Compressed air: 6–7 bar Machine features: Automatic feed for roll and strip materials Codpfx Afsy Emw Hodogw Cartridge glue system allows switching between EVA and PUR adhesives during operation or changing adhesive colour 3 pressure rollers, 1 driven End trimming unit with 2 motors, each 0.22 kW Multifunction unit with controlled axis for flush and chamfer milling, with 2 motors each 0.6 kW Surface scraper unit Radius scraper unit Buffing unit Acoustic enclosure Control: Rotating and tilting operator panel All units can be individually controlled Function display with text and graphics Preselection display for units Program list with names and numbers, self-diagnosis Approx. machine dimensions: 3900 x 1050 x 1800 mm (H) Weight: 1,000 kg INCLUDES OTT Rondomat corner rounding device Note on used machines: • Subject to technical changes or prior sale. • Stated prices are ex-works – loading included! • Machine has been cleaned and functionally tested. • All machines are sold as inspected, without any warranty or guarantee. Buyer is welcome to inspect the machine at the site. • Special agreements are only valid in written form. (We will respond to enquiries only if you provide your address and telephone number!)

Stanje: novo, Multi-combination machine with aluminium sliding table for sawing, milling, surface/thickness planing and optional slot mortising Torsion-resistant steel/cast iron construction Machine table made of cast iron, hardened and ground Smooth-running anodised aluminium sliding table, 10-year SCM warranty on sliding table guides Large crosscut frame with extendable aluminium telescopic fence and fold-away stops With combination saw/miter fence with 45° quick adjustment Max. saw blade Ø 315 mm with optional scoring unit, tiltable from 90° to 45° Helically geared steel infeed roller for consistent wood feed during thickness planing Four spindle speeds, manually adjustable Standard with forward/reverse spindle rotation Three independent motors for each working unit Sliding table with ball contact system Equipped with a proven ball contact system, used millions of times Permanently smooth operation due to hardened and ground guides Not sensitive to dust and dirt due to minimal contact point between ball and trapezoidal rail The extraction ports for surfacing and thickness planing are on the same (right) side. The extraction hose can therefore be used from the same side for both planing modes. Helically geared steel infeed rollers for constant and uniform workpiece feed Massive anti-kickback devices for operator safety 3-knife cutter block for optimal planing results Crosscut length: 1600 mm Max. saw blade diameter with scorer: 315 mm Max. cutting height at 90° / 45°: 100/79 mm Max. crosscut width left of the saw blade: 1660 mm Cutting width at rip fence: 800 mm Saw spindle speed: 3500 rpm Saw blade tilt: 90° - 45° Working width: 300 mm Surface table length: 1260 mm Cutter block diameter / number of knives: 72 mm / 3 pcs. Table dimensions: 300 x 450 mm Min. / max. working height: 3 mm / 220 mm Max. material removal: 4 mm Feed speed: 7 m/min Spindle diameter: 30 mm Usable spindle length: 100 mm Max. tool diameter retractable: 180 mm Spindle speeds: 3500/6000/8000 rpm Cjdpfx Afoiiyppedogw Motor power: 3 x 4 kW, 400 V, 50 Hz Extraction port diameter: 4 x 120 mm Extraction port Ø saw blade guard: 60 mm Weight: 430 kg OPTIONS: - Professional fences: EUR 300 Saw fence with quick locking and micrometric adjustment Planer fence 90° ÷ 45°, continuously adjustable - Scoring unit incl. saw blade: EUR 292 - Handwheel with digital readout for thickness table positioning: EUR 129 - Mobility kit: EUR 119 - 2 additional handwheels for aggregate adjustment: EUR 45 - TERSA cutter block, Ø 72 mm: EUR 212 - Xylent spiral cutterhead, 3 rows of knives: EUR 717 - Aluminium slot mortising unit: EUR 390 - 2 stop flaps for crosscut fence: EUR 150

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2022, as new (only approx. 5,000 m² of parquet processed so far), compact oil application line consisting of: Roller Application Group: Cedpex Ah A Aofx Afdjgw For the application of oils, etc. Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm Membrane pump with max. capacity 18 l/min Frequency inverter for variable speed of the application roller Frequency inverter for variable speed of the counter-roller Transport belt speed adjustable from 3 to 14 m/min Stainless steel recovery trays Pad Group + Brush Group: For spreading and removing excess oils Touch screen control Manual height adjustment Transport belt speed adjustable from 3 to 14 m/min Max. working width: 300 mm Max. workpiece height: 50 mm Pad diameter: 300 mm Quick-change system for pads Brush dimensions L x D = 300 x 160 mm Quick-change system for brushes UV / LED Group Touch screen control Manual height adjustment Max. working width: 300 mm Max. workpiece height: 50 mm UV-LED power = 12 Watt/cm² Incl. extraction fan Transport belt made of Kevlar fabric Transport belt speed adjustable from 3 to 14 m/min Outfeed Transport Belt Length approx. 2,500 mm Max. working width: 300 mm Transport belt speed adjustable from 3 to 14 m/min Notice for used machines: • Subject to errors in technical data and prior sale. • Prices quoted are ex-location, loaded onto truck. • The machine has been cleaned and tested for functionality. • All machines are purchased as inspected, without any warranty or guarantee. Buyers are welcome to inspect the machines at our location. • Special agreements are only possible in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, The A 100 N features the same characteristics as the A6 Plus and Junior, however, both the motor and the hydraulic pump are larger, and the electrical system is more advanced. General features: - Robust construction Codpfx Ajwyc H Tefdegw - Very easy to operate and economical in operation - Simple maintenance - Inspection door with window - Mechanical level probe (rotary paddle switch) - Oil filter in the hydraulic circuit - Pressure gauge for oil pressure monitoring - Low oil level switch - Control panel at the front of the machine - Automatic sensor for press start/stop - Emergency stop button - Wiring diagram - CE marking - Operating manual Technical data: - Motor power: 7.5 kW, connection value 400 V, 50 Hz - Number of pressing cycles per minute: 14 - Capacity: 60 – 100 kg/h (depending on material) - Briquette diameter: 65 mm - Number of hydraulic cylinders: 3 - Oil tank volume: approx. 180 litres - Hopper diameter: approx. 1200 mm Dimensions (L x W x H): 2115 x 1350 x 1700 mm Weight: approx. 1000 kg Incl. approx. 2 m briquette discharge pipe Used machinery notice: • Subject to technical changes and prior sale. • Prices stated are ex-works, loaded free of charge at location! • The machine has been cleaned and function-tested. • All machines are sold as inspected without any warranty. Buyers are welcome to inspect the machine at our site. • Special agreements are only valid if made in writing. (We will only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Hydraulic veneer press with medium heating plates Undercylinder design Medium heating plates for connection to the hot water system Cedpfx Afey Egkgsdsgw Central control panel with all operating elements Analog temperature display of the heating plates Pressing pressure steplessly adjustable via pressure switch Two-stage hydraulic pump Rack equalization Main switch Safety tear-off cable CE marked Pressing area: 2550 x 1350 mm Opening width: approx. 350 mm Number of press cylinders: 4 Total pressing force: 70 t Operating voltage: 3 x 400 V + N, 50 Hz Total connected load: approx. 1.5 kW Required space (L x W x H): approx. 3000 x 1400 x 1850 mm Weight: approx. 3200 kg Note on used machines: • Technical data subject to change and prior sale. • Prices indicated are ex works – free loaded! • The machine has been cleaned and functionally tested. • All machines are sold as inspected, without any guarantee or warranty claims. Buyers are welcome to inspect the machines at our site. • Special agreements are only valid if made in writing. (We only respond to inquiries that include your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Wide Belt Sander VIET Target 211 A Calibration and fine sanding machine with 2 sanding units and a single motor, top sanding configuration Working width: 1100 mm Cedpfxey Exhwe Afdegw Sanding belt dimensions: 2200 x 1130 mm Workpiece dimensions: 4 - 160 mm Motor for table height adjustment: 0.18 kW, 400 V, 50 Hz Main motor: 8.0 kW, 400 V, 50 Hz 2 feed speeds 1st Unit: Sanding roller, rubber-coated, 90 Sh 2nd Unit: Sanding pad, rigid & air-cushion sanding pad, time-controlled Compressed air requirement: approx. 6 bar Extraction port diameter: 2 x 150 mm Dimensions (approx.) L x W x H = 1700 x 1750 x 1800 mm Weight (approx.): 1400 kg Automatic workpiece thickness setting with digital display Workpiece thickness adjustment via foot pedal Automatic conveyor belt centering Sanding belt oscillation Sanding belt (emergency) stop with disc brakes Table extension with 2 rollers on infeed and outfeed sides Emergency stop Main switch CE compliant INCLUDES many sanding belts INCLUDES 2 pcs. re-covered graphite sanding shoe inserts NEW bearings for deflection rollers NEW V-belts for the drive motor Note on used machines: • Technical information and prior sale subject to change. • Listed prices are ex-works – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as inspected, without any warranty claims. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and phone number!)

Stanje: zelo dobro (rabljeno), Working width: 1360 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,360 x 1,900 mm Variable feed speed: 7 - 14 m/min Feed motor power: 1.1 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Cgodpfx Afjych Igsdsw Compressed air supply: 6 bar Dimensions (L x W x H): 2160 x 2260 x 2025 mm Weight: approx. 2200 kg 1st unit: Steel contact roller Motor power: 15 kW, 400 V, 50 Hz 2nd unit: Sanding pad, rigid for fine sanding of solid wood & pneumatically timed sanding pad for veneer 3rd unit: Cleaning brush Abrasive belt oscillation with limit switch Conveyor belt oscillation, pneumatic Motorised thickness adjustment with LED display Units with emergency brake system Emergency stop button at infeed Roller table extension at infeed Complete documentation Note on used machines: • Technical details and prior sale subject to change. • Prices quoted ex site – loaded free of charge! • The machine has been cleaned and tested for functionality. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to enquiries with your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Working width: 1,100 mm Workpiece thickness: 3 – 160 mm Abrasive belt dimensions: 1,120 x 1,900 mm Variable feed speed: 2.6 – 13 m/min Feed motor power: 1.10 kW, 400 V, 50 Hz Extraction port diameter: 2 x 160 mm Compressed air supply: 6 bar Dimensions (L x W x H): 1,705 x 1,545 x 1,905 mm 1st Unit: Steel contact roller, Ø 160 mm Motor power: 15 kW, 400 V, 50 Hz 2nd Unit: Combination unit, rubber-coated contact roller (Sh 65), fixed sanding pad Motor power: 11 kW, 400 V, 50 Hz Abrasive belt cleaning by compressed air 3rd Unit: Cleaning brush Multifunction display Multifunction lever (conveyor belt, workpiece thickness adjustment) Electronic abrasive belt oscillation Pneumatic oscillation of conveyor belt Motorised workpiece thickness adjustment with LED display in 0.1 mm steps Cgjdpoychqzjfx Afdsw Units with emergency brake device Emergency stop button at infeed & outfeed Motor protection switch Roller table extension at infeed with 2 idler rollers Automatic star-delta starting Complete documentation Note for used machines: • Technical data subject to change and prior sale. • Prices quoted are ex-works and refer to collection only – loaded free of charge! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty whatsoever. The buyer is welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Massive work table made from heavily ribbed grey cast iron Robust base frame constructed from welded steel Precision sliding table made of anodised aluminium Carbide guideways – ensure long-term precision and minimal maintenance of the sliding table Tilting saw unit made of cast iron, featuring double segment guidance Heavy-duty rip fence with round bar guide Integrated mitre cutting device on the sliding carriage Scorer unit with its own powerful drive motor (optional) Equipped with high-quality squaring frame & telescopic fence, integrated roller, inclined scale, and a practical eccentric clamp Saw blade speed adjustable in two stages (from above, work table with removable insert) Includes pendulum blade guard INCLUDES OPTIONAL DIGITAL DISPLAY FOR RIP FENCE Max. cutting height at 90° (mm): 140 with 400 blade Max. cutting height at 45° (mm): 100 with 400 blade Saw blade tilt (degrees): 90 / 46 degrees Saw blade lifting and tilting: manual Saw blade speed (rpm): 3,500 / 5,000 Main motor power (kW) 50 Hz: 7.5 Scorer motor power (kW) 50 Hz: 1.3 Scoring blade speed (rpm): 9,200 Cutting capacity, format (mm): 3200 x 3200 Rip cutting width (mm): 1,270 Cgodpfxoit I Sbo Afdjw Extraction port diameter (mm): 120, 60

Stanje: zelo dobro (rabljeno), Bottene pila wahadłowa Moc silnika: 3,7 kW, 380 V, 50 Hz Maksymalna średnica tarczy: 500 mm Wysokość cięcia: ok. 120 mm Maksymalny wysięg: 500 mm Ze stołem rolkowym i prowadnicą wzdłużną po lewej stronie, 3000 mm Ze stołem rolkowym po prawej stronie, 1000 mm Średnica króćca odciągu: 120 mm Wymiary (dł. x szer. x wys.): ok. 4200 x 1150 x 1650 mm Waga: ok. 200 kg Cjdjydnitjpfx Afdegw Piła odchylana w prawo Piła i stół rolkowy przejezdne W komplecie tarcza tnąca Informacje dotyczące maszyn używanych: • Zastrzegamy pomyłki w danych technicznych oraz sprzedaż międzyczasową. • Podane ceny dotyczą odbioru z lokalizacji – załadunek w cenie! • Maszyna została wyczyszczona i sprawdzona pod kątem działania. • Wszystkie maszyny sprzedawane są w stanie jak widać, bez jakiejkolwiek gwarancji. Oględziny na miejscu możliwe dla kupującego. • Szczególne ustalenia wyłącznie w formie pisemnej. (Odpowiadamy tylko na zapytania zawierające adres i numer telefonu!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, Sliding table length: 3700 mm Cutting width at rip fence: 850 mm Cutting width at crosscut fence: 3200 mm Cutting depth: 120 mm Scoring unit: no Saw blade height adjustment: electric / position control Saw blade tilt adjustment: electric / position control Rip fence adjustment: manual Saw blade diameter: 400 mm Cgedpfexzfqbox Afdsw Speeds: 4000 / 4800 / 6000 rpm Motor power: 7.5 kW, 400 V, 50 Hz Extraction connection: 80 and 120 mm INCLUDES: Laser cut-line indicator MITREX double mitre fence Machine dimensions approx. L x W x H = 3850 x 1650 x 1850 mm Weight approx. 1200 kg Note for used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex location – loaded free of charge! • The machines have been cleaned and function-tested. • All machines are sold as seen with no warranty or guarantee of any kind. Buyers are welcome to inspect machines on site. • Special agreements are only valid in written form. (We will only respond to inquiries that include your address & phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1983, Longitudinal Flow Dryer – Heating with Electricity or Hot Water Internal chamber length: approx. 4,500 mm Internal chamber width: approx. 750 mm Internal chamber height: approx. 600 mm Chamber volume: 2.0 m³ Loading from above – chest design Control: manual / fully automatic Electronic control type C Longitudinal ventilation Number of fans: 1 piece Fan motor power: 0.55 kW, 400 V, 50 Hz Electric heating: 4.2 kW INCLUDED: Aluminium stacking laths Wood moisture probe Operating manual, electrical wiring diagram, etc. Space requirements: approx. 5,600 mm x 1,200 mm x 1,600 mm Weight: 400 kg Note for used machines: Cedpfxjy Emqge Afdjgw • Technical details are subject to change, errors excepted, and prior sale reserved. • Quoted prices are ex location – loaded free onto truck! • The machines have been cleaned and function-tested. • All machines are purchased as inspected, without any claim for warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Stroj za nanašanje lepila HÖFER LAN 1300 Codpfx Aoza A Aaefdsgw Za učinkovito nanašanje vodotopnih disperzij (belo lepilo ipd.), enostransko ali dvostransko nanašanje Največja širina nanašanja: 1300 mm Pogon: motor z zobniškim prenosom 0,37 kW Gumirani nanašalni valji Ø 170 mm Žlebljenje za količino nanosa: cca 120 g/m2 (furnirji) Konstantna hitrost nanašanja: cca 16 m/min. Delovna višina cca 900 mm Največja debelina obdelovanca: 80 mm Izvedba po CE Ročni podajalnik Upravljalna stran: desna Vključuje kolesca za lažje premikanje Dimenzije stroja D x Š x V = 1750 x 660 x 1300 mm

Stanje: dober (rabljeno), Leto izdelave: 1992, Single-piece sanding machine Sanding from above & below Electric height adjustment with digital display Infinitely variable feed speed Star/delta start Pneumatic belt tensioning Main switch Sanding belt oscillation Finish brushing unit above and below, manual height adjustment Working width: 190 mm Working height: 4 - 150 mm Min. workpiece length: approx. 280 mm Abrasive belt dimensions (L x W): 1850 x 200 mm Feed speed: 5 - 25 m/min Installed power: approx. 14 kW Extraction port diameter: 2 x 180 mm Dimensions (L x W x H): 2000 x 1000 x 2050 mm Weight: approx. 1800 kg Including infeed and outfeed roller conveyor, L = 1600 mm, non-driven Note on used machines: Csdpfxowyda Us Afdsgw • Subject to technical changes and prior sale. • Stated prices are ex-works – free loading at location! • The machines have been cleaned and function tested. • All machines are sold as seen, with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements are only valid if made in writing. (Inquiries will only be answered with your address and telephone number!)