Nakup rabljenih strojev (91)

Stanje: delavnici obnovljeno (rabljeno), reinforced cast iron table, tiltable balanced cast iron flywheels precise upper & lower blade guides Table dimensions approx. 680 x 580 mm Cast iron flywheel diameter 600 mm Hedpfx Asv Dg A Uedkjni Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Stanje: novo, ATEX version Gear-driven radial fan Filter cartridges made of antistatic aluminized polyester Cells with outlet acrylic filter Dust collection drawers for manual emptying Control panel IP55 Scratch-resistant work surfaces Compressed air filter cleaning system Galvanized design Noise level 78 dBA Foldable side and rear walls (rear wall with extraction function) Working area: 2500 x 800 mm Working height: 930 mm Incl. centrifugal fan 2.2 kW, 400 V, 50 Hz Hnedpfx Adeh Ucqtokei Nominal air flow: 5400 m³/h Number of filter cartridges: 4 Filter cartridge diameter: 320 mm Filter cartridge length: 600 mm Total filter surface: 34.8 m² Noise level: 78 dBA Compressed air: 5–7 bar Note on used machinery: • Specifications subject to change and prior sale. • All prices are ex works, loaded free of charge at site. • The machines have been cleaned and function tested. • All machines are sold as inspected, with no guarantee or warranty. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Enquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Direct drive Airflow rate: 12,000 m³/h Hnedpfx Ajh Tfqhodkei Vacuum: 4,880 Pa Motor power: 26 (30) kW Speed: 2,950 rpm Inlet diameter: 400 mm Discharge diameter: 400 mm Dimensions (L x W x H): 1,150 x 1,200 x 1,850 mm Note on used machines: • Technical specifications and prior sale subject to error. • Stated prices are ex-works, loaded onto transport free of charge. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machine at our premises. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Clean Air Filter Type: Power Unit 300 P Offer type: New machine Technical specifications: Motor power: 7.5 kW / 3 Ph / 400 V / 50 Hz Intake nozzle: DN 300 mm Rated air flow: 5,089 m³/h Max. air flow: 6,000 m³/h Negative pressure at rated flow: 2,434 Pa Hjdpfehfmpxjx Adkjni Filter area: 30 m² Compressed air cleaning incl. integrated pre-separator incl. integrated automatic extinguishing system Chip collection volume: 3 x 250 l Sound pressure level: 71 dB(A) incl. dust barrier Dimensions (L x W x H): 3000 x 1058 x 2361 mm Weight: 838 kg

Stanje: zelo dobro (rabljeno), Motor power 1.2 HP, 400 V, 50 Hz Speed: 2800 rpm Drill table size: 650 x 330 mm Hodpovzramjfx Adksni Transverse travel: 300 mm Longitudinal travel: 150 mm Height adjustment: 170 mm Table height: 880 mm Weight approx. 280 kg

Stanje: novo, Equipment: Height adjustment of the brush units via handwheel with numeric display Brush diameter 200 mm Machine in standard design, CE compliant Technical data: Working width: 600 mm Max. working height: 300 mm Extraction nozzle diameter: 2 x 140 mm Carpet feed motor power: 0.37 kW Feed speed variable: 3 - 20 m/min Brush unit motor power: 4.0 kW each (optionally 5.5 kW) Machine weight: approx. 750 kg Further technical data: see brochure attached Including ACCESSORIES: - Steel brush, brass-coated, Ø 200 mm - TYNEX brush, Ø 200 mm Note regarding used machines: Hsdpodd Hi Eofx Adkjni • Errors in technical data and prior sale reserved. • Stated prices are ex works – free loading! • The machines have been cleaned and functionally tested. • All machines are sold as inspected with no warranty whatsoever. Buyers are welcome to inspect the machines on site. • Special agreements only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Leto izdelave: 2024, ALL ALTENDORF F25 MODELS AVAILABLE FOR IMMEDIATE DELIVERY! Manual height and tilt adjustment 0 – 46° of the saw blade with digital display Motor power 5.5 kW Saw blade speed 3,600 / 4,200 rpm Double roller carriage, carriage length 3,200 mm Angle/miter fence, crosscuts up to 3,450 mm Max. saw blade diameter: 315 mm, max. saw blade protrusion: 104 mm Cutting height 100 mm, 70 mm at 45° Hjdpfx Adog Dgr Heksni Machine height 88 cm Note on Used Machines: • Errors in technical data and prior sale subject to change. • Quoted prices are ex works – free loading. • The machines have been cleaned and functionally tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect machines at our premises. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Stanje: novo, Clean air extraction / dust extractor Dust tested to H3 standard, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic chips High extraction performance with minimal space requirements Maximum output in this class Very quiet operation Designed for commercial use Sturdy and compact housing made of galvanized sheet steel Extraction port easily convertible from left to right, offering flexible use Large maintenance openings Large, mobile chip containers with clamping bracket and chip collection bag Dust extractor is delivered fully assembled, ready for immediate use All models are mobile Filter material made from polyester fleece, aluminum-coated for long service life Filters are antistatic as standard, certified and approved according to Category M-BIA The fan is installed downstream of the filter Extraction motor energy efficiency class: IE3 Hedpfx Adsr A Eq Reksni Nominal airflow: 1,448 m³/h Nominal negative pressure: 2,242 Pa Drive motor power: 2.2 kW, 400 V, 50 Hz Chip collection volume: 2 x 165 l Outer diameter of extraction inlet: 160 mm Filter surface area: 9.21 m² Residual dust content: < 0.1 mg/m³ Maximum sound pressure level: 73 dB(A) Dimensions (L x W x H): approx. 1,618 x 830 x 1,653 mm Weight: approx. 268 kg PM VERSION Automatic filter cleaning with pneumatic system, operating a wiper frame

Stanje: zelo dobro (rabljeno), Tenoning and Slot Mortising Machine WEINIG Type 51 Swiveling studio window device with digital angle display Hnodpfjv Tb Hgsx Adkoi Roller table with automatic feed, 6 m/min Roller table length approx. 2,100 mm Pneumatic workpiece clamping automatic counter block changeover Crosscut saw Pneumatically operated 4-position revolving turret Motor approx. 3 kW / 380 / 400 V / 50 Hz Saw blade diameter = 350 mm Saw blade speed 2,800 rpm Slotting spindle Diameter D = 50 mm Clamping length 320 mm Spindle motor approx. 11 kW / 380 / 400 V / 50 Hz Spindle speed 3,000 rpm Maximum tool diameter 320 mm Length stop system Machine including operating tools Installation dimensions (L x W) approx. = 2700 x 2800 mm Weight approx. 2000 kg Note on used machines: • Technical specifications subject to error and prior sale. • Stated prices are ex location – loaded free onto truck. • The machine has been cleaned and function-tested. • All machines are sold as seen, with no guarantee or warranty of any kind. Buyers are welcome to inspect the machines at site. • Special agreements are only valid in written form. (We will only respond to inquiries including your address and telephone number!)

Stanje: novo, Tilting Spindle Moulder Simple and practical operations thanks to the ergonomic arrangement of the controls on the front of the machine. Digital display for the height and swivel position of the spindle. Spindle speed display. Right/left rotation of the spindle. 8 speeds. Spindle diameter: 30 mm. Spindle clamping length: 125 mm. Max. tool diameter under table: 240 x 80 mm. Extraction port diameter: 2 x 120 mm. INCLUDES OPTIONS: 57.02.63 “LL” version for profiling work with 2 table extensions. 57.03.30 Motorized height and angle adjustment of the working unit with digital displays. 57.01.56 Three-phase motor 7.0 kW 50Hz with star-delta switching. 57.00.76 Fence adjustment with handwheel: - Fence with stepless adjustment via conveniently accessible handwheels on the front: – Adjustment of the entire fence in relation to the tool. – Adjustment of the front ruler to change chip removal. – Mechanical digital displays. – Wooden pressure faces and connecting rails. Dimensions (L x W x H): 2500 x 855 x 900 mm Weight: approx. 550 kg Note on used machines: • Technical data subject to errors and prior sale reserved. • Stated prices are ex location and ex loading! Hnedpfxjcuwpts Adksi • The machines have been cleaned and tested for function. • All machines are sold as seen, without any warranty claims. Buyers are welcome to inspect the machines at the location. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: zelo dobro (rabljeno), Spindle Moulder SCHELLING FZ 4 Heavy cast iron construction Motor speeds: 2250, 3000, 4500, 6000, 9000 rpm Motor power: 4.5 kW, 400 V, 50 Hz Spindle diameter: 30 mm Spindle height adjustment: 100 mm Table size (L x W): 1100 x 900 mm Extraction diameter: 120 & 80 mm Spindle with forward and reverse rotation Hnedpoxt N Dvjfx Adkei Electric motor brake Milling fence adjustable and fine-tunable OERTLI fence jaws with aluminium insert INCLUDING HOLZHER power feed unit 3 rollers 4 speeds Machine dimensions (L x W x H): 1100 x 900 x 1200 mm Machine weight approx. 750 kg Note on used machines: • Technical specifications and intermediate sale subject to change. • Listed prices are ex works, loaded free of charge at location. • The machine has been cleaned and function-tested. • All machines are sold as seen, without any warranty or guarantee. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Leto izdelave: 2023, Robust steel grey cast iron construction Milling spindle can be tilted backwards from 0° to -45° Forward and reverse rotation of the milling spindle Large-sized milling unit made of grey cast iron, mounted directly to the table Solid and precise cast iron table Standard swing-type milling guard Aluminium sliding table with ball contact system Torsion-resistant, highly precise, smooth-running, and reliable in daily operation 10-year SCM warranty against wear on the guideways Milling spindle supported at the top with precision ball bearings for minimal bearing load and maximum service life Precise milling fence with rapid adjustment and fine adjustment with scale at the fence jaw Integrated extraction port Large milling table opening enables use of larger tooling Weight approx. 290 kg Hnjdpfx Ajiknp Rodkoi Extraction connection diameter 2 x 120 mm Work table L x W = 1000 x 435 mm Table height 900 mm Sliding table length 1000 mm Sliding table width 270 mm Drive motor power 5.0 kW, 400 V, 50 Hz Milling spindle tilt 0° to -45° Usable spindle length 100 mm Maximum table overhang 130 mm Spindle speeds 3500/7000/10000 rpm Spindle diameter 30 mm Maximum retractable tool diameter 180 mm

Stanje: novo, The manual milling machine Omec 650-M is suitable for the production of dovetails on drawers and all types of furniture parts. The machine is equipped with a spindle unit with a milling cutter, allowing the machining of dovetails with different heights. The machine can produce four types of dovetail joints with various pitches. Clamping and releasing of workpieces is carried out manually via eccentric shafts. Operation (On/Off) is performed via an overload relay on the motor terminal board and handwheels with levers mounted on the sides of the machine. The machine is built in accordance with CE standards. Technical data: Connection power: 0.75 kW, 400 V, 50 Hz Number of spindles: 1 Spindle speed: 16,500 rpm Hnjdpfjdcdwbsx Adksi Standard dovetail pitch spacing: 25 / 40 / 50 / 60 mm Machine weight: 100 kg Space requirement (L x W x H): 450 x 540 x 1420 mm Workpiece dimensions: Workpiece length: 200 – 1500 mm Workpiece width: 60 – 280 mm Dovetail height: 5 – 18 mm Workpiece thickness: 7 – 45 mm The machine comes as standard with the following parts: - Eccentric HSS milling cutter mounted on the machine - Set of tools for machine adjustment and maintenance - Operating manual.

Stanje: novo, Adjustment of infeed table using parallelogram system Chip removal display via graduated scale Simultaneous height adjustment and locking of work tables, complete with anti-tilt mechanism Quick conversion system for switching from surfacing to thickness planing (CE Version) Featuring a dedicated support for opening surfacing tables and an automatic pneumatic positioning system for the extraction hood, with hydraulic assistance "READY" electronic control includes: – Thickness table adjustment – Manual, semi-automatic, and automatic modes with 99 storable work programs – Additional functions: calculator and operating hours counter Automatic star-delta starting for main motor Machine table with height adjustment via 4 steel threaded spindles Rubber-coated outfeed feed roller Interchangeable feed rollers Segmented pressure shoes at infeed Cutter block and setting gauge for planer knives Micro-safety switches for correct positioning of surfacing tables and extraction hoods Surfacing guard (CE version) Automatic motor brake on main motor Thermal overload relay Emergency stop switch Lockable main switch CE declaration of conformity Technical data: Usable working width [mm]: 520 Total table length [mm]: 2310 Cutter block diameter [mm]: 120 Motor power [kW]: 9.0 Hz 50, 400 V Cutter block speed [rpm]: 5000 4 knives [mm]: 35 x 3 x 520 Aluminium surfacing fence [mm]: 1200 x 190 Surfacing fence tilting from 90° to -45° Min./max. planing height [mm]: 3 / 250 Feed speed for thicknessing [m/min]: 5-8-12-18 Extraction hood diameter surfacing [mm]: 120 Extraction hood diameter thickness [mm]: 120 Including options: - "TERSA" cutter block with disposable reversible knives Hnodpfx Aod Akyzsdkji - Tiltable auxiliary fence for thin workpieces

Stanje: novo, Digital version with motorized thickness table adjustment • Helical-toothed steel feed roller for constant and uniform material feed • Material feed with two speeds • Extra-long surfacing tables enable easy and precise planing of workpieces • Work tables are made of stress-relieved, annealed cast iron—durable, distortion-free, and highly resistant • Surfacing tables open to the rear simultaneously for minimal setup times • The high machine weight ensures maximum precision and smooth operation • Powerful industrial motor • Robust steel/cast iron construction • Chip removal from as little as 0.2 mm (with a minimum workpiece thickness of 3 mm) thanks to the helical-toothed feed roller—ideal for efficient planing of precious timber Hodpfx Adodvn Hwekeni Technical Data: Working width 410 mm Cutterhead diameter (mm) 95 mm Max. chip removal 5 mm Total surfacing table length 2200 mm Thickness table dimensions 410 x 775 mm Thickness table feed speed 6/12 m/min Min./max. working height thickness table 3 – 240 mm Min. working length thickness 180 mm Motor power 5.0 kW, 400V, 50 Hz Including the following options: • Motorized thickness table adjustment with digital display • Fold-down auxiliary fence for thin workpieces • TERSA cutterhead system

Stanje: delavnici obnovljeno (rabljeno), Heavy-Duty Surface Planer Robust German engineering Precision-planed machine tables, total table length 3,000 mm Table adjustment with ball bearing guide Chip removal adjustment with micrometer gauge Concave and pointed settings with scale display Heavy-duty cast iron fence – swivels 45° and height adjustable Machine completely rewired Automatic star-delta starter Motor protection switch Motor brake Emergency stop switch CE certified Cutterhead with 4 strip knives Cutterhead diameter: 120 mm Planing width: 410 mm Working table length: 3,000 mm Cutterhead speed: 5,000 rpm Motor: 400 V, 4.0 kW, 50 Hz Weight approx.: 1,050 kg Note on used machines: • Specifications subject to change and prior sale. • Quoted prices are ex works – free loading! • The machine has been cleaned and function-tested. • All machines are sold as inspected, without any warranty. Buyers are welcome to inspect the machines on site. Hnodpfjvi H Nfox Adksi • Special agreements are only valid in written form. (Inquiries will only be answered if you provide your address and telephone number!)

Stanje: novo, Extra-long jointer tables (2250 mm) made from a single piece allow for easy straightening of workpieces. - Work tables are made of cast iron, stress-relieved and distortion-free, making them durable and consistently flat - Simultaneous opening & closing of the jointer tables with single-point locking - Powerful industrial motor - Fixed mounted extraction hood - Robust steel/cast iron construction - Large fence 1200 x 150 mm (standard with auxiliary fence) - Material feed with four speeds via separate motor - Thicknessing table raised on four sturdy columns, protected by dust bellows - Helical gear infeed roller on the thicknesser Hjdpfx Adocq E Uuekjni - Rubber outfeed roller at the exit of the thickness planer - Preparation for slot mortiser attachment - Digital display for thickness height adjustment (accuracy 0.1 mm) - Automatic star-delta switch Technical Data: Total table length: 2250 mm Working width: 520 mm Max. depth of cut: 5 mm Thickness table dimensions: 850 x 520 mm Min/max. working height: 3/240 mm Feed speeds: 5/8/12/18 m/min Cutterblock diameter/planer knives: 120 mm/with 4 HSS knives Speed: 5000 rpm Self-braking motor: 400 V/50 Hz/S6 - 40 %, 7.0 kW Extraction port diameter: 1 x 120 mm Weight: approx. 650 kg Includes options: - "Teresa" cutterblock Ø 120 mm, monoblock, with 4 quick-release knives - Additional auxiliary fence for thin workpieces - Motorized height adjustment of thickness table with digital display - Thickness table with 2 swing-away idle rollers

Stanje: novo, Working width (finished size): 23–180 mm Working height (finished size): 6–105 mm Minimum workpiece length: 300 mm Feed speed: 6–12 m/min Motor power, horizontal spindles: 2 x 7.5 kW Motor power, vertical spindles: 1 x 7.5 kW Spindle speed: 6,000 rpm Hnjdpfeiiv Dcox Adkji Spindle diameter: 35 mm Clamping length, vertical spindles: 120 mm Clamping length, horizontal spindles: 190 mm Manual lubricant pump Profile capacity without axial adjustment on vertical spindle: 10 mm Loose roller integrated in outfeed table Extraction connection diameter: 4 x 120 mm Including OPTIONS: - Motor-driven feed roller in front of the planer with lever for quick adjustment - Front vertical pressure unit in front of the left vertical spindle - Infeed table length: 2,300 mm - Tool package consisting of 4 planer heads and one jointer rebate cutter

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2005, Automatic moulder with 9 spindles and SCM Control 100 PC control for all spindles Max. working width: 240 mm Min. working width: 25 mm Max. working height: 120 mm Min. working height: 10 mm Minimum workpiece length: 640 mm Feed speed: 6 - 36 m/min, variable Spindle speed: 6000/8300 rpm Spindle diameter: 40 mm Usable length of vertical spindles: 140 mm Usable length of horizontal spindles: 250 mm Axial adjustment of vertical spindles relative to worktable: 0 - 80 mm Axial adjustment of horizontal spindles relative to right guide: 0 - 45 mm Min. and max. profile tool diameter: 100 - 220 mm Min. and max. cutterhead diameter: 120 - 140 mm Profiling capacity of 2nd lower horizontal spindle with 200 mm tool diameter: 15 mm Feed motor power: 5.5 kW Diameter of feed rollers: 140 mm Infeed table length: 2500 mm Quick adjustment of infeed table and guide: 10 mm Extraction capacity: 7500 m³/h Compressed air supply: 6 - 10 bar Weight: 6000 kg Dimensions (L x W x H): 6300 x 1620 x 1655 mm Spindle configuration: Lower horizontal spindle Motor power: 11.0 kW Spindle speed: 6000 rpm Right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd right vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm 2nd left vertical spindle Motor power: 7.5 kW Spindle speed: 8300 rpm Upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 2nd lower horizontal spindle Motor power: 12.0 kW Spindle speed: 8300 rpm 2nd upper horizontal spindle Motor power: 11.0 kW Spindle speed: 8300 rpm 3rd lower horizontal spindle Motor power: 7.5 kW Spindle speed: 8300 rpm SET - UP quick adjustment system Work tables with fine adjustment of all units via Control 100 PC system Axial adjustment range of vertical spindles: 80 mm large tool diameters Pneumatically operated full safety enclosure Feed system with full cardan drive Infinitely variable feed speed Electric height adjustment of the feed system and spindles with independent control Segmented pressure shoes after upper horizontal spindles Fine adjustment of outfeed table Pneumatic device for spindle locking in working position Automatically adjustable left vertical spindle Including ZIWO CL 15 feeder unit Note for used machines: • Specifications are subject to errors and prior sale. • Listed prices are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, with no guarantee or warranty whatsoever. Buyers are welcome to inspect the machines at the location. Hnodpfjg Umrmsx Adkji • Special agreements are only valid in written form. (We only respond to inquiries with your address and telephone number!)

Stanje: novo, obratovalne ure: 2 h, Special, patented ROTOR design! Motor power: 11/15/18 kW, 400 V, 50 Hz Rotor width: 595 mm Rotor speed: approx. 45 rpm Rotor diameter: 280 mm Screen: hole size 7 to 30 mm (optionally in hardened special steel) Cutting crowns: 34 pieces, 25×25 mm (hollow-ground, 4-times reversible, hardened special steel) Counter-blades: up to 2 pieces (2-times reversible, optionally in hardened special steel) Throughput*: up to 2 m³/h (*material-dependent) Material feed opening approx.: 600 x 350 mm Heavy-duty main bearings Hsdehq T Udepfx Adkoni Compact control cabinet with modern PLC-control & 5m cable length Extraction diameter: 200 x 200 mm Dimensions L x W x H approx.: 1,050 x 1,180 x 1,890 mm Weight: approx. 900 kg 2,000 h warranty on the high-performance gearbox

Stanje: novo, Universal application (wood, pallets including nails, wood fiberboard and offcuts, veneers, MDF boards, plastic, ...) Hnjdpfx Asgw Sxzsdkoi Motor power: 18.5 kW Rotor length: 550 mm Rotor diameter: 222 mm Rotor speed: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m³/h (depending on material) Extraction connection: 160 mm Material: plastic, cardboard, wood (chipboard, MDF boards, waste, ...) Feed hopper opening: 946 x 567 mm Dimensions (L/W/H): 1880/1120/1670 mm Weight: approx. 1250 kg 2-year warranty or 2,000 operating hours Used machine notice: • Subject to errors in technical details and prior sale. • Stated prices are ex works - loading included! • The machine has been cleaned and function-tested. • All machines are sold as inspected, with no claims or warranties. Buyers are free to inspect the machines at the location. • Special agreements are only valid in written form. (We only respond to inquiries with full address and phone number!)

Stanje: zelo dobro (rabljeno), Leto izdelave: 2002, Edge thickness: 0.2 – 12 mm Workpiece dimensions: Minimum width: 70 mm Minimum/maximum height: 8 / 42 mm Minimum length: 160 mm (for strip edges) Minimum length: 60 mm (for coil material) Feed speed: 12 m/min Glue application roller Working height: 880 mm Compressed air: 6 bar, 1/4 inch Extraction port: 160 mm diameter Machine dimensions (L x W x H): 5600 x 950 x 1300 mm Weight: approx. 2200 kg Connected load: approx. 11.5 kW, 400 V, 50 Hz Equipment: - Double top pressure with electronic height adjustment Hnodpfohy Tlrox Adksi - Automatic magazine for coiled edges up to 800 mm diameter - Pneumatic guillotine shear for strip edges up to 3 mm - Automatic infeed fence Pre-milling unit with 2 high-frequency motors, 1.5 kW, 12,000 rpm Double end trim saw - 2 high-frequency motors, 0.2 kW, 12,000 rpm 2 automatic positions = 0 + 3 degrees Flush trimming unit with 2 high-frequency motors, 0.7 kW, 12,000 rpm Radius milling unit - with 2 high-frequency motors, 0.3 kW, 12,000 rpm Surface scraper Note on used machines: • Errors in technical details and prior sale excepted. • Stated prices are ex-works – free loading! • The machine has been cleaned and function tested. • All machines are sold as inspected, without any warranty. Buyers are free to inspect the equipment at the location. • Special agreements are only valid if made in writing. (We only respond to inquiries including your address and telephone number!)

Stanje: novo, The best-selling edge banding machine in its class with an unmatched price/performance ratio. SCM edge banding machine for plastic edges from 0.4 - 3 mm and solid wood edges up to 5 mm, equipped with a new corner rounding unit. Edge thickness for roll material: 0.4 - 3 mm Maximum edge thickness for strip material: 5 mm Minimum – maximum workpiece thickness: 8 - 50 mm Feed speed: 9 m/min Pre-milling unit: 2.2 kW, 9000 rpm Glue pot: 0.18 kW, 0.8 kg Saw trimming unit: 0.19 kW, 12,000 rpm Flush/radius trimming unit: 2 x 0.35 kW, 12,000 rpm Corner rounding unit: 0.35 kW, 12,000 rpm OPTIONAL Hnsdpfsc S Di Rsx Adkei Radius scraper Surface scraper Grooving unit 1.1 kW, 12,000 rpm, groove width 4 mm Buffing unit with 2 independent motors Flush/radius trimming unit with tracing rollers Heatable infeed fence Quick-change glue pot system ...

Stanje: novo, Hebrock Model F 2 next Type of offer: New machine, SALE ONLY IN AUSTRIA! Immediately available new machine with special price and full manufacturer’s warranty. The 3.3 m long F 2 is not only cost-effective and space-saving. It is also equipped with everything you need to process perfect edges right from the start: diamond-tipped jointers ensure your workpieces are optimally prepared for edge-banding. The equipment includes a jointing unit (up to 2 mm cutting depth), a quick-heat top-mounted glue pot, end trimming saw, and combination milling unit. Optionally, the F 2 can also be equipped with a surface scraper. Max. edge thickness: 3 mm Max. workpiece thickness: 50 mm Ready for operation in 3.5 min Feed rate approx. 10 m/min Equipment: Edge banding machine F2 next With PLC control (incl. touchscreen) Hotmelt glue application to the workpiece for edge material up to 3 mm Jointing cutter (incl. diamond tool) up to 2 mm cutting depth Maintenance-free glue pot with quick-change feature incl. glue discharge device HF end-trimming saw station (approx. 12,000 rpm) HF milling station (approx. 12,000 rpm) with separate pneumatic adjustment and interchangeable cutter (combination version) Robust chain feed Hodpfx Asl D Rp Esdkoni Ball-bearing double roller top pressure Viewing window from rear of machine Pull-out workpiece support Including optional features: F2/12 surface scraper (incl. pneumatic lift-off) F2/30 pneumatic 3-point adjustment (radius, chamfer, flush milling) F2/27 nesting for milling stations

Stanje: zelo dobro (rabljeno), Leto izdelave: 2007, Edge thickness: 0.2 - 12 mm Workpiece thickness: 8 - 52 mm Minimum workpiece width: 70 mm Minimum workpiece length: 150 mm Automatic edge magazine Jointing milling unit: 2 x 1.5 kW, controlled feed End trimming unit: 2 x 0.3 kW Flush milling unit: 2 x 0.7 kW, one-sided tracing Fine milling unit: 2 x 0.35 kW, tiltable at 15/30/45 degrees Fine milling unit: 2 x 0.3 kW, R=2, double-sided tracing Corner copying unit: 2 x 0.3 kW Scraper unit, automatically controlled Surface scraper unit with fine adjustment feature Buffing unit: 2 x 0.2 kW, oscillating 5-way spraying system (2 x separating agent, 1 x lubricant, 2 x cleaning agent) Hnjdpfx Adjlc Ewiokei Color touch screen control OTT C3 Motorized height adjustment Feed speed: 10 - 14 m/min Infinitely variable feed speed COMBI MELT gluing unit for EVA/PUR, hopper volume 1.5 l CE marking Total connected load: 12.6 kW Dimensions (L x W x H) approx.: 6120 x 840 x 1500 mm Weight approx.: 2,900 kg