Prenosni generator pare in tople vode

Cristanini Ghibli DHR 8

Stanje: novo, moč: 6,77 kW (9,20 KM), Leto izdelave: 2024, SCHORR Track Dumper RR500DHKAH PRO – Discover the Advantages: - 9.2 HP four-stroke engine - Self-propelled & powerful tracked drive - Hydraulic scissor lift (discharge height 1.44 m) - 500 kg payload - Large, high-quality tipping skip with wide tipping angle - Foldable operator platform as standard - 6+2 gears SCHORR TRACK DUMPER DHKAH PRO WITH HYDRAULIC TIPPING, OPERATOR PLATFORM, AND SCISSOR LIFT The SCHORR RR500DHKAH track dumper features a hydraulic tipping drive and has a payload capacity of 500 kg as well as a powerful 9.2 HP single-cylinder 4-stroke petrol engine. The stand-out feature of the RR500DHKAH is the hydraulically controlled scissor lift function. This allows you to discharge materials at heights up to 1.44 m – ideal for trailers, containers, or other elevated surfaces. Thanks to its slim design (700 mm), the mini dumper can also navigate narrow paths and doorways, making it an extremely flexible transport solution. The robust tracked drive enables the mini dumper to easily overcome rough terrain, inclines, and curbs. The rubber tracks provide a secure footing in all work environments. Raising and lowering the skip/box is effortless, even under full load, thanks to the hydraulic tipping mechanism. With its sturdy skip made of thick steel and a straight outlet for quick and easy discharge, this dumper is a must-have for anyone needing to transport heavy loads. Tipping on mild inclines is no problem at all. The wide tipping angle ensures that even fully loaded skips are completely emptied without the need for manual assistance. This saves both time and effort, making the motorised wheelbarrow indispensable for anyone who values efficiency and performance. TECHNICAL DATA: Manufacturer (abbr.): SCHORR Model code: RR500 Model: DHKAH Load capacity: 500 kg Tipping mechanism: Hydraulic (stepless) Drive type: Track Weight (unpackaged/packaged): 363 / 388 kg Drive Engine: Air-cooled 1-cylinder 4-stroke OHV engine Starter: Recoil starter Power: 9.2 HP Transmission: 6 forward gears / 2 reverse gears Speed Forward: max. 8 km/h Reverse: max. 5 km/h Fluids Fuel tank capacity: 6 L (unleaded petrol) Hydraulic oil capacity: 3 L (ISO VG 32) Transmission oil capacity: 1.5 L (SAE 80W-90) Engine oil capacity: 0.9 L (15W-40) Max. hydraulic oil flow rate: 9 L/min Dimensions Overall length, platform folded: 1900 mm Overall length, platform extended: 2100 mm Overall width (including tracks): 710 mm Overall height: 1050 mm Container dimensions (internal): 740 x 665 x 435 mm Container dimensions (external): 1060 x 710 x 520 mm Track width: 710 mm Loading volume (liquid): ~ 200 L Loading volume (heaped): up to 370 L (depending on material) Track chain dimensions: 180 x 60 x 38 mm Ground clearance: 120 mm Packing size: 1890 x 740 x 1220 mm Loading Height Side: 1030 mm Front: 810 mm Discharge height min./max.: 810 / 1440 mm Godpfx Aettg Upob Tskf We at SCHORR are happy to assist with any questions regarding our lift trucks. You can reach our knowledgeable team by phone or by email. We look forward to hearing from you and providing assistance during your purchasing decision.

Stanje: rabljeno, Leto izdelave: 2015, številka stroja/vozila: 5319, potovalna razdalja osi X: 8.000 mm, pomik osi Y: 2.600 mm, pomik po osi Z: 1.300 mm, BASE MACHINE PowerSpeed 5 WITH FORK HEAD – TECHNICAL DATA Travel ranges: X-axis: 8,000 mm Y-axis: 2,600 mm Z-axis: 1,300 mm Machine Bed (X-axis): Flat-bed design with 1,000 mm guideway width. Two electric motors drive a centrally mounted rack. Hardened compact linear guides ensure high precision. Machine Column (Y-axis): Welded steel construction with 900 mm guideway width. Two liquid-cooled feed motors and two measuring systems provide dynamic performance and accuracy. Protection is provided by telescopic steel covers. Spindle Slide and Spindle Head: Made from GGG 60 cast iron, guided by compact linear bearings. Optimal power transmission via long guideways and tight arrangement of the Y and Z axes. Dual Ball Screw Drive: Two vertical ballscrews with separate drives and measuring systems for high dynamics and long-term accuracy. Drive System: Digital individual drives with AC motors. Feed and rapid traverse range: 2–30,000 mm/min. Acceleration: 3.5 m/s². Measuring System: Direct, non-contact linear measuring systems for high manufacturing accuracy. Automatic 2-Axis Fork Head with Motor Spindle: A-axis: 764 Nm (100% duty cycle), ±105°, clamping torque 2,160 Nm, accuracy ±5" C-axis: 810 Nm (100% duty cycle), ±200°, clamping torque 3,024 Nm, accuracy ±3" Motor Spindle: HSK-A 63, up to 18,000 rpm, 89 Nm (100% duty cycle), internal/external coolant supply up to 70/20 bar, liquid cooled Electrical Equipment: 400/230 V, 50 Hz, 80 kVA connected load. Control cabinet (IP54) with control and switching devices. Cable length machine-to-cabinet: 5 m. Control Cabinet Cooling: Dual-chamber system with automatic internal air cooling and dehumidification. Lubrication: Central lubrication for guides, permanent grease lubrication for main spindle, oil mist lubrication in milling head. Energy Supply: Compressed air 4–6 bar, G ¼ connection, with filter pressure regulator and condensate separator. Control System: Siemens 840D sl with swiveling operator panel. Wireless handwheel with LCD display, potentiometers, and buttons for axes, feed, and spindle. Remote Maintenance: Gedpfx Abowdub Dj Tokf Fault diagnosis via alarm manager, notification by email/SMS (SIM card and network required). TightBlock Machine Base (X = 8,000 mm): Heavy composite construction for vibration damping. Foundation recommendation: ≥100 mm thickness per 1,000 mm X travel range, structurally verified. Coolant System: 500 l tank, filtration system

Stanje: novo, Leto izdelave: 2024, New machine Year of manufacture: 2024 Features and technical specifications: Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput capacity: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connection: 400 V +/- 5 % / 50 Hz Included: Press mechanism with feed cylinder, main cylinder, clamping cylinder Gsdpfx Ast Hagnob Tskf Connection part for transport pipe Chromed clamping tongs Hydraulic tank 160 l with pump motor + valve control Oil temperature safety switch Base plate 1,040 x 1,040 mm with agitator + motor and screw conveyor discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Control cabinet on hopper and electrical control unit Briquette length monitoring Automatic end-position of all cylinders Manual control Automatic on/off with fill level limit switch Material: Planer shavings, wood shavings from solid wood, loose, clean and free from foreign matter* Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year * Specification of contaminants: Any material other than wood, wood pieces larger than 12 mm. Throughput capacity is highly dependent on material. Stated values are averages. Depending on mixing ratio, moisture content, and material properties! Application not or not fully specified/disclosed. Machine is sold appropriately and solution-oriented by a specialist dealer. If heat builds up due to blockages, operating time may be drastically reduced. Availability: short-term Stock location: Solingen

Stanje: novo, Leto izdelave: 2023, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 2.500 mm, pomik po osi Z: 760 mm, hitro pomikanje X-os: 20 m/min, hitri pomik os Y: 15 m/min, hitri pomik na osi Z: 15 m/min, teža obdelovanca (maks.): 12.000 kg, skupna višina: 48.500 mm, skupna dolžina: 85.800 mm, skupna širina: 56.000 mm, širina mize: 2.400 mm, dolžina mize: 3.020 mm, skupna masa: 20 kg, hitrost vretena (min.): 10 obr/min, največja hitrost vretena: 6.000 obr/min, razdalja od središča mize do nosu vretena: 960 mm, nos vretena: ISO 50, dolžina orodja: 350 mm, premer orodja: 127 mm, Oprema: dokumentacija / priročnik, vrtilna hitrost brezstopenjsko nastavljiva, Portale verticale Bearbeitungszentrum "AWEA LP-3025" Godpfx Aberl Svrj Tekf

Leto izdelave: 2012, Stanje: rabljeno, Pasteurizer with tube heat exchanger, 600 L/h (up to 80°C) with automatic control system Buffer tank for Bag-in-Box (BiB) with level control Bag-in-Box filler with flowmeter Oil-fired heating boiler, 50 kW, installed mounted on braked trailer with tarpaulin cover Gksdo Hnnhepfx Ab Tof max. gross weight 1,350 kg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 67027, Proizvajalec: ZAYER, Gkjdpfx Abew Iy Hlj Tof Tip: GMCU 6000-AR, Leto izdelave: 2014, Serijska št.: 67027, 6-osni, Površina mize: 7000*2500*300 mm Širina med stebri: 3800 mm Hodi (X/Y/Z): ca. 6000/4500/1250 mm, 45° univerzalna rezkalna glava Ravna rezkalna glava Orodno vpenjalo SK50, Menjalnik orodij za 60 orodij, Krmilna omara HEIDENHAIN iTNC 530, Transporter ostružkov TECNIMETAL, Hladilni sistem, Varnostna ograja s svetlobnimi zavesami LENZE

Stanje: novo, Stroj za tlačne vzmeti Ø2,0 mm/2-osni. Pogon s pomočjo odmičnika (cam-driven). Gkodelf Ek Dopfx Ab Tsf

Stanje: novo, Leto izdelave: 2025, Delovno območje: 6100 mm × 1524 mm / 4000 mm × 1524 mm / 3048 mm × 1524 mm Izhodna moč laserja: 3000 W / 2000 W / 1500 W / 1000 W Natančnost pozicioniranja: ±0,05 mm Ponovna natančnost pozicioniranja: ±0,03 mm Maksimalna usklajena hitrost: 91 m/min Maksimalno pospeševanje: 1G 1. Raztegnjen aluminijast nosilec Letalsko-kakovosten material z izboljšano togostjo bistveno zmanjšuje deformacije nosilca pri visokih hitrostih ter povečuje občutljivost in učinkovitost obdelave pri visokih hitrostih. 2. Posteljna konstrukcija z ugreznjenimi spojkami (Tenon-and-mortise) Uporablja tradicionalno kitajsko spojno tehniko "tenon and mortise" za večjo nosilnost. Priključne točke za varjenje in nosilna konstrukcija zagotavljajo dolgoletno stabilnost delovanja. Varjena konstrukcija prispeva k boljši absorpciji vibracij, zmanjša odklone ob tresljajih ter omogoča natančnejše rezanje. 3. Dvojni avtomatski centrirni električni vpenjalniki Dvojna električna vpenjalnika z avtomatsko centrirno funkcijo sta enostavna za uporabo in zahtevata minimalno vzdrževanje. Nov motor omogoča natančen nadzor. Modularne komponente vpenjalnika so samostojno razvite ter jih je mogoče hitro zamenjati. 4. Avtomatska funkcija ostrenja laserske glave Z nastavitvijo perforacijske in rezalne žariščne razdalje posebej je rezanje natančnejše. Primerna za različne žariščne razdalje – položaj žarišča se samodejno prilagodi glede na debelino posameznih pločevin. 5. Funkcija alarma pri nizkem tlaku plina Sproten nadzor tlaka plina in javljanje nepravilnosti zagotavljata kakovost in natančnost reza ter pravočasno opozorita upravljavca na potrebo po zamenjavi plina. Gkedog Eglpopfx Ab Tef

Leto izdelave: 2022, Stanje: kot nova (razstavni stroj), 5 kW air-cooled chiller for outdoor installation with axial fans. Standard configuration includes a P3 pump. Technical data available upon request. The unit is available in stock at our Güglingen warehouse. Gsdpfjfqllljx Ab Tekf We are happy to provide free and professional advice for your application. We constantly have a changing selection of chillers in various sizes available from stock, both as demo units, new, and occasionally used. We also accept chillers in part exchange or purchase them outright.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2023, The ENR series are air-cooled chillers designed for industrial applications and outdoor installation. The ENR 038 features axial fans, scroll compressors, condensers with finned aluminum blades, and a self-cleaning coaxial evaporator to ensure maximum operational reliability. It comes equipped with an internal pump, tank, fan control, and uses low-GWP refrigerant R454B. Cooling capacity is 37 kW, utilizing environmentally friendly R454B refrigerant. Gjdpfx Asfmd Hhob Tskf We have a large selection of used and new chillers available directly from stock. Contact us for a non-binding offer. We offer rental, sales, and nationwide servicing for all refrigeration systems in Germany.