CNC portalna rezkalna stroj

Correa XPIDER

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, CNC upravljanje: Heidenhain TNC 620 Osi Pomik X-os mm: 500 Pomik Y-os mm: 450 Pomik Z-os mm: 400 C-os indeksiranje stopinj: 360º (0,001º) B-os indeksiranje stopinj: -5º+110º (0,001º) Podajalne hitrosti m/min: 12 Hitropomik m/min: 12 Delovna miza Iiedpfx Aasyzar No Uoa Dimenzije palet mm: ø630×500 Maks. teža obdelovanca kg: 200 Vreteno Maks. hitrost vrtenja vretena obr/min: 10.000 Moč vretena kW: 9/13 (100% ED/40% ED) Orodni sistem Vpenjanje orodja: SK-40 Število orodij v zalogi: 16 Maks. premer orodja mm: Z prostimi sosednjimi mesti mm: ø130 Z zasedenimi sosednjimi mesti mm: ø80 Maks. dolžina orodja mm: 300 Maks. teža orodja kg: 200 Signalna luč CE-skladnost Hladilna pištola Neposreden merilni sistem XYZ Merilna sonda Ročni upravljalnik Merjenje orodij Obratovalni čas stroja: Ure pod napetostjo: 28.826 Delovni čas vretena: 14.423 Geometrija in vreteno v zelo dobrem stanju.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, potovalna razdalja osi X: 1.600 mm, pomik osi Y: 1.100 mm, pomik po osi Z: 1.400 mm, hitro pomikanje X-os: 60.000 m/min, hitri pomik os Y: 60.000 m/min, hitri pomik na osi Z: 60.000 m/min, širina mize: 1.000 mm, dolžina mize: 1.250 mm, obremenitev mize: 3.000 kg, število mest v zalogovniku orodij: 180, X-os: 1600 mm Y-os: 1100 mm Z-os: 1400 mm Indeksiranje osi B: 360000° Dolžina mize: 1250 mm Širina mize: 1000 mm Obremenitev mize: 3000 kg Število palet: 2 Pomik osi X: 60000 mm/min Pomik osi Y: 60000 mm/min Pomik osi Z: 60000 mm/min Iiedpfx Aasx Sqpto Usa Vpenjalni sistem orodja: HSK-100 ISO/BT/MK Moč vretena: 52 kW Št. vrtljajev: 12000 o/min Menjalec orodij: 180 Število krmiljenih osi: 4 Dolžina: 9170 mm Širina: 6320 mm Višina: 3969 mm Teža: 39500 kg

Stanje: rabljeno, TECHNICAL DATA - Number of axes: 4 MILLING SPINDLE Iedpfxsw Ephbe Aa Ujia - Tool holder: BT50 - Spindle drive power: 40 [kW] - Spindle speed: 12,000 [rpm] - Gearbox - Number of spindle speed ranges: 2 LINEAR AXES - Travel X/Y/Z axes: 2400/1650/1750 [mm] - Rapid traverse speed (X/Y/Z): 42 [m/min] - Feed speed (X/Y/Z): 20 [m/min] SWIVEL AXIS B - Travel: 360 [degrees] - Minimum resolution: 0.001 [degrees] TOOL CHANGER - Tool changer type: Bras chargeur - Number of tools in magazine: 116 - Tool change time: 3.8 [sec] PALLET CHANGER - Pallet changer type: Rotopalette - Pallet size: 1600 x 1250 [mm] - Number of pallets: 2 - Max. pallet load: 5000 [kg] - Distance from table center to spindle nose: 100 - 1750 [mm] - Max. workpiece diameter: 2500 [mm] - Max. workpiece height: 1850 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total connected load: 86 [kVA] WEIGHT AND DIMENSIONS - Required space: 9,485 x 6,155 [mm] - Machine height: 4,370 [mm] - Machine weight: 50,000 [kg] MACHINE HOURS - Operating hours: 15,446 [h] ACCESSORIES - Control: Fanuc 31i-model B5 Interface: Ethernet / RS232 / USB / PCMCIA - SOFT SCALE II - Electronic handwheel - Synchronized thread cutting - 3-color status lamp - Coolant tank * with high-pressure pump: 70 [bar] * Through-spindle coolant supply (IKZ) * with paper filter * with coolant chiller * with rinse gun * with cabin wash - Chip conveyor - Spindle cooling - Tool measurement probe - Workpiece measurement probe: Renishaw RMP60 - Tool breakage control: SOFT AC - Number of pallets: 2 - Machine vice - Tool holder

Stanje: rabljeno, Leto izdelave: 2012, x-travel: 850 mm y-travel: 700 mm z-travel: 500 mm Control: Siemens 840 D Rotary table: 800 mm c-axis: 0.001º (±360º) Isdpfx Aoyxy E Rea Uoia B-axis (table): º mm Spindle speed: 18,000 rpm Tool holder: HSK 63 Tool changer: 38 positions Internal coolant supply: 80 bar Total power requirement: 43 kVA Machine weight approx. 10.6 t Hermle C 40 U Machining Center 5-axis KinematicOpt Adjustable operating panel 2 machining tables, Schunk zero-point clamping system Additional magazines: 43 positions Blow-off device Compressed air through spindle center Chip flushing gun Spindle cooling Electronic thermal compensation Electronic hand control module Renishaw probe BLUM tool breakage control Additional hydraulics for hydraulic workpiece clamping The technical data are manufacturer or operator specifications and therefore non-binding for us. Interim sale reserved; exclusively our terms and conditions of business and sale apply. About us: More than 400 own machines in stock Over 15,000 m² warehouse space, crane capacity up to 70 t More than 10,000 items/accessories for your workshop If you wish to sell machines, complete production lines or your business, please contact us. Further offers can be found on our website. Viewings are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Leto izdelave: 2012, stanje: dober (rabljeno), Muratec MW120 GT naprodaj Rabljeno, v odličnem stanju. Ogled stroja je možen po dogovoru. Iijdpfxeifi D Ts Aa Uea Dostava je odgovornost kupca, po potrebi pa lahko pomagamo pri pakiranju in nakladanju. Dobava: EXW Székesfehérvár

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2022, moč vretenovega motorja: 29.000 W, največja hitrost vretena: 5.000 obr/min, skupna masa: 620 kg, število osi: 6, This 6-axis EMCO Hyperturn 65 Powermill G2 was manufactured in 2022. This highly productive CNC turning-milling center features a main and counter spindle with a maximum torque of 250 Nm and speeds of up to 5,000 rpm. The milling spindle delivers up to 12,000 rpm. It is equipped with a 40-position tool magazine, a 12-position turret, and the modern Sinumerik ONE control system. If you are looking for high-quality turning and milling capabilities, consider the EMCO Hyperturn 65 Powermill G2 machine we have for sale. Contact us for further information. • Main spindle (direct drive): • Max. torque: 250 Nm • Counter spindle (direct drive): • Max. drive power: 29 kN (as supplied) • Max. torque: 250 Nm • Speed range: 0–5,000 rpm • Milling spindle (direct drive): • Max. drive power: 37 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Tool turret (direct drive): • Max. drive power: 10 kW • Max. torque: 30 Nm • Speed range: 0–12,000 rpm • Kinematics and axes: • Upper cross-slide with turning/milling spindle as motor spindle; hydraulic clamping during turning operations • Y-axis travel: +/- 120 mm • B-axis with direct drive: +/- 120°, hydraulic clamping • Tool equipment: • Tool magazine with 40 stations, HSK-T63 • 12-station radial turret with direct drive, tool interface BMT55P • Spindles and clamping: • High-pressure cylinder with draw tube for the main spindle • Full clamping cylinder with partial hollow clamping 66 x 550 mm deep in the counter spindle • Programmable clamping pressure for main and counter spindle • External feed flushing at main and counter spindle • Mechanical holding brake on main and counter spindle • C-axis for main and counter spindle • Control and HMI: • SINUMERIK ONE / OPERATE, EMCONNECT app-based user interface • 22" multi-touch display • IPC with 240 GB • SHOPTURN dialog programming • 3D simulation and drawing • Remainder material detection • Unlocking of external memory • CAD reader (DXF import) • TRANSMIT and TRACYL for programming the C-axis • USB interface, network drive (Ethernet) • PC keyboard incl. HMI hotkey • LED status indicator • Fluids and operating materials: • 2 cooling fluid lines at 25 bar • 2 rinsing pumps at 4.3 bar • Control cabinet air conditioning unit • Cooling system for spindle motors, milling spindle, B-axis torque motor and turret direct drive • Hydraulic unit • Machine light • 8 leveling elements • Feedback/measuring system: • Glass scales: X1 (incl. air supply), Y1, Z1, X2 (HT65-PM-G2 / 840D-sl) Additional equipment • Chip management and filtration: • Hinged belt chip conveyor, discharge height 1,200 mm • Belt filter system, 980 liters • Waste water pump Iodpfsx D E Hbsx Aa Ueia • Control/monitoring options: • Electronic handwheel BAOD-SL (portable, magnetic holder for Siemens controls) • EMCO tool breakage and wear monitoring / B40D-SL • Wireless probe / HSK drill breakage monitoring BK-MICRO • 4-axis turning / balancing cut (SINUMERIK option) • Alternative end spindle speed (SINUMERIK option) • Turret as tailstock (SINUMERIK option) • Counter spindle as tailstock (SINUMERIK option) • Bar feeder (specs as supplied): • Bar length: 300–1,200 mm • Bar diameter: 10–104 mm • Material support area (front view): 800 x 1,250 mm • Material capacity: 12 bars with 65 mm diameter • Max. load capacity: 400 kg (max. 74 kg/bar) • Rectangular material: min.

Stanje: novo, Leto izdelave: 2018, NEW MACHINE at a special price Tactile Coordinate Measuring Machine by Innometrik Measuring range: 1200 x 3000 x 1000 mm Maximum workpiece weight: 1000 kg Accuracy MPEE: 2.2 + L / 350 (in µm) Scale resolution: 0.1 / 0.5 µm Iodpjdyl H Nefx Aa Ujia - Air bearings on all axes Linear speed: 300 mm/s Volumetric speed: 520 mm/s Probe system: Renishaw TP200 incl. 3 modules (SF, HF, LF) and triple tool changer Software: OptiCheck 4.5 & Virtual DMIS (separate partitions). Optionally also Polyworks per customer request -incl. PC (Windows 7), alternatively Windows 10 -incl. 2 monitors -incl. mouse / keyboard Image: Sister machine

Leto izdelave: 2002, stanje: pripravljen za uporabo (rabljen), Z dvema obdelovalnima moduloma, X-os: -50 do 725 mm, Y-os: -200 do 300/ -250 do 250 mm, hitro pomikanje X-, Y-, Z-osi: 18/12/30 m/min, krmiljenje: Siemens Sinumerik, temperaturno območje: 5-40°C, vrsta toka/frekvenca: 3 PEN/50Hz, nazivna napetost: AC 400V, krmilna napetost: DC 24V, pomožna napetost: AC 230V, priključna moč: 102 kVA, nazivni tok: 148A, nazivni tok (hiter): 148A, varovalka (počasna): 160A, dolžina: 8000 mm, širina: 3000 mm, višina: 4000 mm, teža: cca 17 t, stanje delovnih ur: cca 80.000 h. Stroj je popolnoma funkcionalen, kroglično vreteno (obtočno vreteno) Z-osi je bilo obnovljeno leta 2024, redno vzdrževan. Z dokumentacijo, razdelilno omaro, hidravličnim agregatom, filtrskimi elementi in transporterjem za ostružke. Ogled na mestu je možen. Iiodpewbuyzjfx Aa Uja

Stanje: rabljeno, Leto izdelave: 2013, Swing diameter . mm Turning length 2000 mm Control Siemens 840 D sl Main spindle: max. speed 3800 rpm Main spindle: max. torque 1200 Nm Tailstock quill diameter 140 mm Center taper MK6 Tailstock force 5 - 30 kN Feed rate Z-axis mm/min Rapid traverse Z-axis 40 m/min Feed rate X-axis - mm/min Rapid traverse X-axis 25 m/min Total power requirement 125 kW Machine weight approx. 20 t The machine can still be inspected under power at the vendor's plant. It is in good condition, with excellent turning accuracy. The milling drive is non-functional. A quotation from Niles for the repair of the milling drive is available upon request. Iiodpfx Aaevu E R Se Usa Includes hydraulic steady rest.

Stanje: dober (rabljeno), Leto izdelave: 1988, dolžina brušenja: 1.000 mm, širina brušenja: 550 mm, višina brušenja: 400 mm, premer brusilnega koluta: 400 mm, širina brusilnega kolesa: 100 mm, Manufacturer: ELB-SCHLIFF Model: SWBE 010 ND Iisdpfx Aeu Rqynoa Uoa Year of manufacture: 12-1988 Availability: immediately Electro-permanent magnetic chuck SAV 1000 x 400 mm Fine pole pitch 45-5 mm Electric straight dressing device with compensation Vertical digital readout Mount for grinding wheel max. 400 x 100 x 127 mm Spindle motor 7.5 kW, 1435 rpm Adjustment wedges Coolant system with universal paper band filter Complete documentation