Vijačni kompresor

CORMAK LUFT 1000 10bar / 270L tank/ Air dryer

Stanje: dober (rabljeno), Leto izdelave: 1956, Težki stružni stroj, stružnica, stružna klop, stružnica z vodilnim in gnanimi vreteni -Proizvajalec: Meuser, stružnica z vodilno in vijačno gredjo tip M3A -Dolžina struženja: 1400 mm -Premer struženja nad posteljo: 550 mm -Premer struženja brez postelje: 800 mm Itedpfx Adoh Uuzyekjd -Premer struženja nad suportom: 300 mm -Premer vretena: Ø 58 mm -Število vrtljajev vretena: 15 - 810 obr/min -Tričeljustna vpenjalna glava: Röhm Ø 250 mm -Čelna plošča: 500 mm -Dodatki: vključno z nosilcem orodij/orodji glej slike -Konus konjička: MK5 -Dimenzije: 2770/1160/V1310 mm

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, premer struženja nad prečnim suportom: 280 mm, izvrtina vretena: 58 mm, premer struženja nad ležiščem sani: 470 mm, višina središča: 235 mm, stružna dolžina: 1.000 mm, poteza s peresom: 127 mm, premer tulec: 68 mm, skupna dolžina: 2.150 mm, skupna širina: 810 mm, največja hitrost vretena: 2.000 obr/min, hitrost vretena (min.): 20 obr/min, širina postelje: 300 mm, skupna masa: 1.800 kg, nosilec puše: MK 4, Centre height: 235 mm Centre distance: 1000 mm Spindle bore: 58 mm Spindle nose according to DIN 55029: Camlock D6 Motor power: 5.5 kW Spindle speed range: 20–2000 rpm Equipment includes, among others: Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surfaces) of the carriage and cross slide Manual central lubrication with a pump for the longitudinal and cross slides Complete coolant system with rear splash guard and carriage splash protection Chuck guard Control rod with 3 adjustable cams Itedpjcirniefx Adkod Machine lamp Fixed centre Set of machine mounting plates

Leto izdelave: 2026, stanje: novo, Technical specifications: - Rated capacity: 2000 L/h - Power requirement: 0.5 kW, 230 V, 6 A, single phase - Material: Wnr. 1.4301, AISI 304 stainless steel - Dimensions: 550 x 1075 x 350 mm - Weight: 50 kg - IP65 electronics - Stainless steel pump with food-grade rubber scrapers - Fully automatic - Connection: DN 65 Iodefhb I Hspfx Adkotd - Minimal maintenance - The machine can be operated either fully automatically or manually. - Compatible with all Maurer presses.

Stanje: novo, volumenski pretok: 0,984 m³/h, Atlas Copco G7FF 500 L Screw Compressor – NEW Itjdpfshkttpjx Adkjd Specification: • Condition: New • Manufacturer: Atlas Copco • Output: 984 l/min • Main motor power: 7.5 kW • Tank capacity: 500 l • Maximum working pressure: 10.0 bar • Integrated refrigerated dryer • Electronic control of compressor operating parameters • Soundproof enclosure (only 67 dB) • CE compliant • User manual in Polish • Weight: 227 kg Additional information: • Manufacturer’s warranty available upon commissioning by an authorized Atlas Copco service provider • Available within 7 working days

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2004, WEINIG UNIMAT SUPER 4 Planer – German-made – Very good condition – Year of manufacture: 2004 – Operating manual (DTR) TECHNICAL SPECIFICATIONS: Planing width: 150 mm Planing height: 50 mm Spindle diameter: 40 mm Equipped with tooling Adjustable top head 1) Bottom head: 11 kW, 6000 rpm 2) Top head: 18.5 kW, 7000 rpm 3) Bottom head: 5.5 kW, 6000 rpm Feed motor: 2.2 kW Feed speed adjustable via inverter: 0-18 m/min Feed with cardan shafts Pneumatic hold-down Three hardened steel top feed rollers One rubber top feed roller Ribbed infeed table Infeed table length: 1950 mm Total power: 37 kW Central lubrication Transport dimensions: Length/Width/Height: 320x220x220 cm Itodpfsin Nrgjx Adked Weight: ~2700 kg

Leto izdelave: 1967, stanje: dober (rabljeno), številka stroja/vozila: 7011/C, Table clamping surface: 310 x 1400 mm Table travel (X-axis): approx. 950 mm Table travel (Y-axis): 325/345 mm Table travel (Z-axis): approx. 500 mm Spindle speeds: 20 - 1500 rpm Feeds, longitudinal and cross: 18 - 620 mm/min Feeds, vertical: 18 - 620 mm/min Electrical connection: 380 V, kW Required space: 1900 x 1600 x 1750 mm Weight: approx. 1500 kg Itodpfjd Rxw Hex Adkod

Stanje: dober (rabljeno), The machine was used for washing fruit and olives and is in good condition. Ijdpfx Adovtf T Djkotd

Leto izdelave: 1987, stanje: dober (rabljeno), for cutter diameter up to max.: 300 mm Saw stroke manually adjustable: 550 mm Itjdpfx Aeghl Emodksd Manual feed via spindle: 150 mm Height adjustment via spindle by hand approx.: 130 mm Table semicircle diameter: 500 mm Saw blade drive: 380 V, 2.2 kW Saw blade speed: 2700 rpm Space requirement approx.: 1000 x 900 x 1300 mm Weight approx.: 100 kg

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 10 h, Including: Special iron bending tool ATRC 18 Special ornamental bending tool ATAR 305 Helical bending device ATSC Demonstration machine, less than 10 hours of operation! Iodpst Akxaofx Adketd TECHNICAL DATA Shaft diameter: 30 mm Roller diameter: 128 mm Roller speed (rpm): 8.5 - 17 Drive motor: 0.75 kW Main switch with trip coil and built-in emergency stop (CP30 - CP30 R) - Reversing gearbox and dual-speed selector mounted on a separate control panel (CP30 - CP30 R) - Foot pedal for rotation control (L/R) with built-in emergency stop (CP30 PR) - Two-speed selector (CP30 PR) - Mechanical adjustment of the upper roller with digital position display - Two traction rollers with knurled surface - Machine inner frame made of steel - Shafts made of hardened and ground, high-strength steel - Gear wheels made of special steel with ground teeth - Rollers made of special steel, hardness 59/60 HRC - Outer cover in ABS - Working position: horizontal (CP30) - Working positions: horizontal and vertical (CP30 R - CP30 PR) Weight: CP 30 PR: 240 kg External dimensions (mm): CP30 PR Base: 680 x 800 – Height: 825 ACCESSORIES Guide rollers, 2-way Universal rollers (standard) Operating key Operating manual

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, For the gentle preservation of liquid food products with or without carbonation in pre-filled bottles. Depending on the bottle shape, a throughput of between 60–120 l/h is possible. Control options for the desired product temperature or via timer. Gas strut-assisted tank lid, fully insulated design, mounted on castors with storage compartment. Suitable for various bottle types (milk bottles, beer bottles, mason jars, etc.). Dry-run protection, heat-up time approx. 1 h (from 20°C to 90°C), supplied as standard with perforated plate base. Adjustable holding time (0–99 min). Technical data: Water capacity: approx. 115 l Weight: 143 kg (empty weight) Height: 1,090 mm (working height) Ijdpfxjtpg Dme Adkstd Width: 705 mm Length: 1,080 mm Electrical fuse: 16 A Electrical connection: 400 V, 50 Hz (3-phase) Electrical power: 9.15 kW Nominal output: up to 120 l/h