Tračna žaga

CORMAK BS-128HDRC 230V +2x M42 +5L Emulgol

Stanje: rabljeno, Leto izdelave: 2011, Premer reza 260 mm Dolžina žaginega traku 3340 x 27 x 0,9 mm Območje reza pri 90 stopinjah: kvadrat 260 mm Območje reza pri 90 stopinjah: ploščat 380 x 260 mm Hitrost traku 37 / 74 m/min Moč motorja žage 1,5 kW Teža stroja pribl. 0,62 t Prostorske zahteve pribl. 1,7 x 1,4 x 1,3 m Poševna tračna žaga - Polavtomatska - Dvojni poševni rez Dodpswkvq Hsfx Abgokp - Zaznavanje materiala pri spuščanju - Vključuje 7 žaginih trakov

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe - Manufacturer: Weisser, Geared Head Lathe Type PF200 - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm - Three-jaw chuck: Röhm Ø 250 mm Dkjdpfxstzf N Ro Abgep - Accessories: included, see photos - Tailstock taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg

Stanje: novo, Cutting diameter: 225 mm Saw blade length: 2480 mm Cutting width: 250 mm Cutting speed: 45 / 90 m/min Saw blade dimensions: 2480 x 27 x 0.9 mm Djdpfjlb I Daox Abgekp Cutting area at 45°: flat 135 x 185 - 145 x 150 mm Cutting area at 45°: round 150 mm Cutting area at 45°: square 145 mm Cutting area at 60°: flat 63 x 107 - 69 x 90 mm Cutting area at 60°: round 70 mm Cutting area at 60°: square 70 mm Cutting area at 90°: flat 240 x 160 - 250 x 110 mm Cutting area at 90°: round 225 mm Cutting area at 90°: square 185 mm Total power requirement: 0.75 / 1.1 kW Machine weight: approx. 200 kg Required space: approx. 1385 x 580 x 890 mm Technical features: - Hydraulic system for controlling saw head descent - Automatic cut-off at end of cut - Powerful three-phase induction motor with 2 speeds and oil bath gearbox - Saw bow, vice, and mitre assembly made from cast steel - Steel saw blade guide with ball bearings - Quick-release vice - Front-integrated lever for mitre angle lock - Coolant pump with aluminium body - Large handwheel for easy blade tensioning - Pressure gauge for blade tension display (600-1000 kg/cm³) - Emergency stop safety switch - Swarf brush for saw blade cleaning STANDARD EQUIPMENT: - Mountable base cabinet - Coolant tank - Electric coolant pump - Length stop for series cuts - Tools for blade change and adjustments - Chip removal brush - Hydraulic cylinder with feed adjustment

Stanje: rabljeno, Leto izdelave: 2024, Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, with electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of borehole depth when drilling on the end-face. This eliminates the need to reset borehole depth when switching from wide-face to end-face drilling (+10 mm, for example, with dowel length 35 mm, drilling depth wide-face 14 mm, and drilling depth end-face 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves and intermediate panels, (aluminium profile 40x40 mm) with 3 drop-in stops. - With quick-change system, easily swapped from right to left stop side for mirror-image drilling of shelves and intermediate panels in carcass constructions. Also suitable for line boring in 32 mm system. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for quick changeover from carcass to frame and line drilling operations. Dksdpfx Ajxnlflsbgsp - Clamping arms for clamping rail designed for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. - 1 set of dowel drills: 5 HM dowel drill bits, Ø 8x77 mm, right-hand - 4 HM dowel drill bits, Ø 8x77 mm, left-hand Basic machine Dowel Hole Boring Machine GANNOMAT "DB 21400V, 3Ph, 50Hz / 1.5 kW complete in standard configuration including: - Fully automatic electronic control with pulse operation via foot pedal for clamping-drilling-unclamping, and electric skip function. - Automatic return of the drilling unit after reaching the set drilling depth. - Automatic extension of the borehole depth for end-face drilling, eliminating the need to adjust the drilling depth from wide-face to end-face (+10 mm, e.g. with dowel length 35 mm, wide-face drilling depth 14 mm, end-face drilling depth 24 mm). - 1 drilling beam with 21 spindles, 32 mm pitch, 1.5 kW motor (drilling feed 0-70 mm), including 21 quick-change chucks (Ganner system) for easy drill bit changes. - Simple pivoting of the drilling unit from 0° to 90°, assisted by gas cylinder. - 1 clamping rail adjustable on the Y-axis with 3 pneumatic clamping cylinders, for workpiece height up to max. 80 mm. - Ideal positioning system consisting of: - 1 stop ruler 1800 mm for drilling shelves/intermediate panels (aluminium profile 40x40 mm) with 3 drop-in stops, - quick-change system, easily switched from right to left stop side for mirror-image shelf drilling in carcass construction; also suitable for line boring in System 32. - Side stops and position adjustments, as well as drilling height adjustment via mechanical digital counters on the support table. - Side stops can be easily pivoted away for ultra-fast changeover from carcass to frame and line boring. - Clamping arms for clamping rail suited for line boring positions up to max. 300 mm. - Ideal three-stage tooling system. Extraction funnel, dust-teste

Stanje: dober (rabljeno), Leto izdelave: 1988, Upogibni stroj, abkant stroj, nihajni upogibni stroj, stiskalnica za upogibanje. Dedpfx Ajv Tpxqsbgekp - Predaja: v trenutnem stanju, kot je bilo ogledano, glejte slike - Delovanje: ročno upravljanje (brez avtomatskega načina) - Proizvajalec: RAFAMET nihajni upogibni stroj Tip KM-4 - Pogon: mehanski - Največja delovna širina: 2020 mm - Največja debelina pločevine: 4 mm - Globina odbojnika: 750 mm - Priključna moč: kW - Dimenzije: 3350/1540/H1510 mm - Teža: 3900 kg

Stanje: novo, Leto izdelave: 2026, Grinding of contoured materials using the side table Dkodpfxsvuggze Abgsp Easy and quick abrasive belt replacement via a lever Movable unit enables operation in both horizontal and vertical positions Standard equipment includes an additional height-adjustable table Tensioning device ensures consistent abrasive belt tension Compact machine dimensions with a wide range of applications Technical data: Belt size [mm]: 2010 x 152 Worktable size [mm]: 790 x 221 Table height [mm]: 810 Stand height [mm]: 600 Auxiliary rounding table size [mm]: 514 x 221 Max. grinding length [mm]: 790 Extraction nozzle diameter [mm]: 100 Face and edge grinding angle [°]: 0 - 45 Belt speed [m/min]: 840 Motor power [kW]: 1.1 Power supply [V]: 400 Weight [kg]: 75 The listed price is net. Transport not included.

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 1997, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 690924, Connected load 380V 1.84 kW Speed 2840 rpm Number of spindles: 21 pcs, 32 mm pitch Spindle distance 640 mm Djdpfoh U Damsx Abgokp Spindle rotation direction: 11 right-hand, 10 left-hand, M10 thread 2x safety clamps Pneumatic foot valve Table size 880 x 400 mm 1x side stop with 2 flip stops 1x base stop 1x mitre stop Unfortunately, we are unable to respond to inquiries without complete contact information.

Stanje: novo, Cutting capacity at 90°: round 105 mm Cutting capacity at 90°: square 100 mm Cutting capacity at 90°: rectangular 100 x 105 mm Saw band dimensions: 1335 x 13 x 0.65 mm Dimensions (L x W x H): 650 x 310 x 300 mm Band speed: 30 - 80 m/min Total power requirement: 0.95 kW Machine weight: approx. 18 kg Special Offer Price!! Berg & Schmid - Portable Band Saw PBS 90 ESC High-performance and particularly robust metal band saw with aluminum die-cast saw table and stepless cutting speed for mitre cuts up to 60° Shipping cost share: 25 EUR Dkjdpefv Aq Rofx Abgop Images show identical PBS 110 model.

Leto izdelave: 1992, stanje: dober (rabljeno), številka stroja/vozila: 29-0288, Offer 04612 Technical specifications: - Cutting capacity at 90° round: 260 mm - flat: 450 x 240 mm Dsdpfx Aogin Ndobgokp - Cutting capacity at 45° round: 230 mm - flat: 240 x 200 mm - Machine is mounted on original swiveling base - Saw band dimensions: 3660 x 25 x 0.9 mm - Cutting speeds: 20 / 35 / 50 / 70 m/min - Hydraulic raising and lowering of the saw frame - Cutting pressure infinitely variable: 0 - 10 m/min - Total drive power: 400 V / 0.8 kW - Coolant system - Space requirement approx.: W 2100 x H 1200 x D 1000 mm - Weight approx.: 500 kg

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: rumena, stanje pnevmatik: 90 odstotek, stanje pogona: 90 odstotek, število sedežev: 1, številka stroja/vozila: KM&EW144, Oprema: hidravlika, kabina, Opis proizvoda Rabljena oprema za hvatanje trupaca Proizvođač: Caterpillar Model: CAT 966C Rad na dizelski motor Stroj se prodaje u viđenom stanju Za više informacija, molimo kontaktirajte: VIJAY JPN Industrial Trading Pte Ltd Dsdpsum Eiusfx Abgskp 13A Pandan Crescent, Singapur 128478