Dvojnopolžni ekstruder

COPERION ( Werner & Pfleiderer ) ZSK 170 W 1920/1750

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2002, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 172 mm, največja hitrost vrtenja: 49 obr/min, Over the past few years, more than €420,000 has been invested in new components and factory overhauls! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing housing: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Twin-screw degassing unit Coperion DSE 180, year 2021 Hsdpszl A N Nofx Amhjnr Main gearbox P.I.V, year 2002, factory overhauled in 2021, unused Main gearbox P.I.V, year 1986, factory overhauled in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory overhauled in 2020, unused Main motors Siemens, 212 kW, year 1986, factory overhauled in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust disks Note: The electrical and control systems as well as the screw segments are not included in the scope of supply.

Leto izdelave: 2007, stanje: zelo dobro (rabljeno), EKSTRUDER EXTRUDEX EN50-30D, leto izdelave 2007, št. 4101264, opremljen z talilno črpalko, menjalnikom sit in 5-plastno ekstruzijsko glavo. Leto izdelave 2007. Poleg tega 4 koekstruderji EXTRUDEX EN25-25D, leto izdelave 2007. UPORABA: Izdelava 5-plastnih cevi iz PE. Največji premer 32 mm. Hjdpfovyaxujx Amhjnr SESTAVINE: 1 enovijačni glavni ekstruder EN 50. 4 koekstruderji, enovijačni pomožni ekstruderji. Ekstruzijska linija je v moji lasti. Lokacija: D-26345 Bockhorn-Grabstede, Bahnhofstr 6, Nemčija.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, premer vijaka: 172 mm, največja hitrost vrtenja: 49 obr/min, Over the past few years, more than €420,000 has been invested in new components and factory overhauls! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Hsdpfoyztagjx Amhsnr Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing housing: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Twin-screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory overhauled in 2021, unused Main gearbox P.I.V, year 1986, factory overhauled in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory overhauled in 2020, unused Main motors Siemens, 212 kW, year 1986, factory overhauled in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust disks Note: The electrical and control systems as well as the screw segments are not included in the scope of supply.

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Dvojni polžasti ekstruder Ref. št.: DE27695 Proizvajalec: Leistritz Tip: ZSE 40 HP Leto izdelave: 2002 Premer polžev: 2 x Ø 40,0 mm L/D: 40D Pogon: 70 kW Podrobnosti: so-vrteči polži, segmentirani polži in valj, 1 x segment za stransko doziranje Možnosti: granulacija, doziranje, stranski dovajalnik Ponudba ne ustreza vašim željam? Obiščite našo spletno stran Plama Engineering ali nam pošljite podrobno povpraševanje – za skoraj vsak proračun imamo ustrezno rešitev. Hjdpfex Dip Tjx Amhenr

Stanje: rabljeno, Leto izdelave: 1986, Funkcionalnost: popolnoma funkcionalen, Suhi kroglični mlin – vključno z novim elektromotorjem Hnodpexixiyofx Amhjr

Stanje: zelo dobro (rabljeno), Manufacturer: Krupp Diameter: approx. 2,600 mm Hnedpfx Ameu Rrqnjhjr Length: approx. 3,600 mm Drive: 400 kW AEG Weight: approx. 18 t Can also be used as a ball mill Used grinding rods can be purchased additionally Spare girth gear, unbored

Leto izdelave: 1968, stanje: dober (rabljeno), for aluminium Strip width: max. 1,050 mm Hnsdpfogryk Nsx Amher Strip thickness: 10 - 20 µm

Leto izdelave: 2016, stanje: zelo dobro (rabljeno), Maszyna wyprodukowana w Polsce o wysokim standardzie wykonania, wyposażona w pełny panel dotykowy sterowania. Czterotorowa linia do liniowego napełniania i zamykania kubków. Była używana do napełniania kubków foliowych pasztetem. Idealna do produkcji pasztetów, karmy dla zwierząt, mięsnych past itp. Stan zbliżony do nowego. Hsdpfxsht Hllo Amhsnr

Stanje: rabljeno, BARMAG Extrusion Line comprising: 1x BARMAG Extruder KEP 200-26,3,3-S 1x KNÖDLER Translation Gearbox FZ 6000 2_Z-ED 200 – NEW, Year 2016 1x SIEMENS Drive Motor 1GG6208 with forced ventilation, 470V, 468A, 206kW, 2600rpm, excitation 310V, 6.8A – NEW, Year 2015 Hsdpfeuak Nljx Amhsnr 1x Control unit 1x SCHOLZ Dosing Unit incl. feed hopper with level sensor – Year 2004 Plant features: - Single-screw extruder, approx. year 1973 - Output: 800 kg/h - Retrofitted with new drive and gearbox in 2016 - Screw diameter: 200 mm - Screw length: 5266 mm - Process-engineering length: 26.3D - Geometry: Feed zone – barrier – mixing section - Screw material: nitrided steel - Technical documentation available Subject to prior sale Enquiries by email only please Note: The machine is still installed and can be inspected on-site. Disassembly and transport must be organised by the buyer and are not included in the asking price.

Leto izdelave: 2015, obratovalne ure: 36.000 h, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 04638, Leistritz ZSE40HP-36D Year of manufacture: 2015 Power: 55 kW Speed: 600 rpm Including die head with 6 holes Including Brabender volumetric dosing unit Previous application: MB ABS, PP & PE, up to 120 kg/h Operating hours: approx. 36,000 h Please refer to the pictures and video for the condition and scope of supply. The system is currently located in England. The equipment is currently disassembled. The device/system offered here has been tested and is fully functional and ready for operation. The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued, provided a valid VAT ID number is supplied. Subject to prior sale. Visit our website to see our other offers as well. The stated company names and trademarks are the property of their respective owners and are used for identification and description purposes only. Hnjdpfjx Sq I Nex Amhsr Deviations from technical data as well as errors in the item description may occur and are subject to change.