Zabojnik za shranjevanje

CO2 carbon dioxide gas used storage tank

Stanje: pripravljen za uporabo (rabljen), Two tubular pasteurizers are available, including a storage tank with a capacity of 7,000 liters. Hedjgi Nxaspfx Abhsh

Stanje: zelo dobro (rabljeno), prevoženi kilometri: 16.330 km, prva registracija: 10/2015, vrsta goriva: dizel, konfiguracija osi: 6x2, gorivo: dizel, barva: bela, vrsta prenosa: mehanski, emisijski razred: Euro 6, Leto izdelave: 2015, Oprema: ABS, AdBlue, električno nastavljivo ogledalo, električno upravljanje oken, filter saj, meglenke, spojler, žerjav, = Additional Options and Accessories = - Low noise - Speed limiter - LED lights - Air suspension - Air horn - Particulate filter - Sun visor - Stability control - Toolbox - Power take-off (PTO) = Further Information = Axle Configuration Maximum front axle load: 10,000 kg Rear axle 1: Twin tyres; Max. axle load: 11,500 kg Rear axle 2: Lift axle; Max. axle load: 7,500 kg; Steerable Weights Unladen weight: 17,420 kg Payload: 11,580 kg Gross vehicle weight: 29,000 kg Specifications Mast: Telescopic (12 sections) Mast length: 33.8 m Lifting capacity: 20,080 kg Lifting height: 3,380 cm Crane: COPMA 510.7 + JIB J4, mounted behind the cab Body make: COPMA 510.7 + JIB J4 CE marking: Yes Condition Technical condition: Very good Optical condition: Very good Financial Information Price: On request Identification Registration number: 01-BVF-9 SCANIA P250 6X2 + COPMA 510.7 CRANE + JIB J4 EURO 6 L PACKAGE 250 HP DRIVE 6X2, REAR AXLE STEERABLE AND LIFTABLE 10 TON FRONT AXLE WHEELBASE 370 CM AIR SUSPENSION CP14L CAB WITH LEATHER INTERIOR MANUAL TRANSMISSION TOOLBOX ONLY 16,330 KM!!! COPMA 510.7 CRANE + JIB J4 OIL COOLER FOR CRANE HYDRAULICS 11X HYDRAULIC EXTENSIONS + 1X MANUAL MAX WORKING HEIGHT 33.8 METERS MAX LIFTING CAPACITY 20,080 KG MAX LIFTING CAPACITY AT 30.1 METERS 350 KG 4X OUTRIGGERS RADIO REMOTE CONTROL BALLAST FLATBED WITH REMOVABLE ALUMINIUM SIDE PANELS 450 CM LENGTH HOOK EYES FOLLOW US ON INSTAGRAM: GEURTSTRUCKS Hjdpjuxvpksfx Abhsh WE SPEAK GERMAN WE SPEAK ENGLISH HABLAMOS ESPAÑOL

Stanje: novo, Leto izdelave: 2025, številka stroja/vozila: 988906827, fully mobile concrete batching plant Frumecar Fastmix * THE CONCRETE FILLING STATION * - Year of manufacture: New - 2-4 storage bins with 7-14 m³ capacity - Output capacity: 14-25 m³/h depending on mixer size - Mixer sizes: 0.5 m³ - 0.75 m³ - 1.0 m³ - Siemens concrete batching software with self-service terminal, new barcode system and EC card terminal - 9 m discharge conveyor - 32 t cement silo incl. screw conveyor - Installation, commissioning, and training included - 2-year warranty - Highest quality plant on the market. All components manufactured in Europe. Electric motors and gearboxes by Siemens. Other plant components from market leader VAM. Hsdpehd I Smjfx Abhsh Input errors and mistakes in this offer are expressly reserved. Binding are solely the concrete agreements in the order confirmation and/or the purchase contract. More construction equipment and mixing plants on our website Further information Application: Construction, Suitable material: Concrete, Overall condition: very good, Technical condition: very good, Visual condition: very good,

Stanje: rabljeno, Leto izdelave: 1961, Teža bata: 750 kg Hod bata: 660 mm Število udarcev: 100 /min Energija udarca: 2040 kJ Razdalja sedlo/spodnji rob vodila bata: 6600 mm Izsek: 750 mm Kovanje jekla - pravokotnik do 240 mm Kovanje jekla - premer do 270 mm Pogonska moč: 75,0 kW Teža kladiva: 16,5 t Teža šabote: 15,5 t Skupna teža: 32,0 t Hjdovuullspfx Abhsh Prostorska zahteva (ŠxGxV): 3,2 x 1,45 x 3,45 m POSEBNA PONUDBA Kovaško kladivo, način delovanja: pnevmatski prodaja se kot stoji in leži, BREZ zagona / BREZ nadaljnjih del, nakladanje na tovornjak v ceni Video na voljo pri prodajalcu pred demontažo

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, obratovalne ure: 4.189 h, vrsta goriva: dizel, tip droga: dupleks,

Stanje: novo, Leto izdelave: 2024, nosilnost na konzolno roko: 500 kg, višina police: 3.200 mm, skupna dolžina: 2.100 mm, skupna višina: 3.200 mm, razmak osovin: 1.000 mm, nosilnost na stojalo: 2.500 kg, Cantilever Rack in Hot-Dip Galvanized Design: Scope of delivery: - 3 uprights, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) Hjdpfeqt Dmysx Abhoh - 12 cantilever arms with 1.8 m usable depth (for chipboard panels approx. 2.1 m deep) - Longitudinal and diagonal braces for 4 m rack length (upright spacing 1.3 m) - Mounting material (bolts, nuts and washers) Net price: €2,490.00 plus VAT Detailed Description: - Robust steel construction made of IPE profiles (bolted system) - Rack height: 3,200 mm - Load capacity per upright: 2,500 kg - Base section and cantilever arms with 1,800 mm usable depth (for 2,100 mm chipboard depth) - Cantilever arms height adjustable in 100 mm increments - 4 bolted cantilever arms per upright as standard (= 5 storage levels) - Load capacity per cantilever arm: 500 kg - Including longitudinal and diagonal bracing for 1,000 mm upright spacing - Rack length = 2,100 mm - Includes mounting material (excluding floor anchors) - Supplied with assembly instructions and load signs C4 according to DIN standard - Made in Germany - Short delivery times Our cantilever racks are exclusively manufactured in Germany. We offer reliable shipping with prior notification before delivery. Material is sensibly packed for easy unloading. Delivery for stock items can be made approximately 1 week after receipt of order. When installed outdoors, the load capacities are reduced due to wind and snow loads. The subfloor must be concrete, level, suitable for dowelling, and capable of supporting the applied loads. The customer is responsible for checking and ensuring soil condition, bearing capacity, and any necessary official permits. Uprights must be anchored to the floor on site; wall anchoring is neither necessary nor recommended. According to occupational safety regulations, it is recommended that the uprights provide at least 500 mm projection above the top storage level.

Stanje: nepreverjeno (rabljeno), Lubot & Wakker Type: 1-pallet vacuümkamer Capaciteit: tot 2.000 kg (6-8 ladingen) per uur Volledig uitgevoerd in roestvrij staal Afmetingen kamer: L x B x H = 2.200 x 1.700 x 3.400 mm Hsdofxyqrspfx Abhsh Gewicht: 1.200 kg Elektrisch: 380V 3P+N+E, 7,25 kW Perslucht: 6 bar Drinkwater: 3 bar, ca. 1250 liter/uur Uitvoering: - Bedieningskast - Vacuümpomp - Mengtank voor waterbereiding - Opslagtank met pomp, kleppen etc. Wordt geleverd in actuele staat, of getest en op wens van de klant afgesteld

Leto izdelave: 2018, Stanje: rabljeno, 2-vessel brewhouse mounted as a brew block on a stainless steel frame. The system consists of the following components: - Mash/lauter tun made of stainless steel for mashing in, mashing, and lautering. Independent control of the thermal oil-heated jacket and bottom heating. The double-walled vessel is insulated and features a polished internal surface. The top-mounted motor drives the cutting and stirring agitator with infinitely variable speed control. For lautering, there is a multi-part perforated false bottom, and for spent grain removal, a rectangular manway on the side. Furthermore, the vessel is equipped with a hinged lid, CIP spray head, temperature probe, and spray unit. - Wort kettle/whirlpool made of stainless steel. The double-walled vessel features welded heating zones in the jacket and the base, both heated with thermal oil. The vessel is insulated and comes with a temperature probe, hinged lid, CIP spray head, spray unit, height-adjustable lock, and tangential wort inlet for the whirlpool phase. Internal surfaces are polished. Hedpfxew Tbmde Abheh - Single-stage plate heat exchanger for cooling wort from 100°C to 18°C while simultaneously heating water from 13°C to 77°C. Wort from a brew can be cooled in about one hour. The plates are made of stainless steel 1.4401 (AISI 316), gaskets EPDM. The wort cooler is equipped with a PT1000 temperature sensor. - Thermal oil heater for heating the laser-welded heating zones of the brewing vessels. The thermal oil tank holds approx. 50–65 liters of oil, electrically heated up to a maximum of 150°C. An over-temperature safety switch automatically stops heating above 160°C. The vessel is equipped with temperature and level probes. A pump circulates the thermal oil. - 12 hl hot water tank, separately mounted on three legs, with top manway. The tank is heatable, insulated, and features hose level indicator, temperature probe, and hot water pump. - Centrifugal pump for product transfer between vessels and for CIP cleaning, with 0.37 kW motor and stepless speed control. - Stainless steel pipelines and manual valves for routing product streams. Pipes are orbital-welded and feature polished internal surfaces. - Control unit with 10" touchscreen and PLC for brewhouse automation, enclosed in a stainless steel switch cabinet. The following processes can be controlled and monitored: 1. On/off and speed control of the agitator and cutting agitator 2. Temperature control of mash/lauter tun 3. Temperature control of kettle/whirlpool (separate for bottom and jacket) 4. On/off and speed control of the product and CIP pump 5. Display of incoming water temperature 6. Display of wort temperature at outlet 7. Temperature control for the thermal oil tank 8. Timer settings 9. Setting mash programs (multi-step mashing with up to 5 rests; time, temperature, agitator, and pump speeds adjustable) 10. Hot water tank temperature Machine (additional information): Compact brew block with hot water tank Wort output capacity: 5 hl Power: 38 kW Length: 2877 mm Width: 1476 mm Height: 1952 mm Operation / Control: Switch cabinet with PLC and touchscreen Material: Stainless steel 1.4301 (AISI 304) Base construction: Brewhouse block on stainless steel frame, hot water tank separate Equipment: Mash/lauter tun; wort kettle/whirlpool...

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Cryogenic GOFA tank trailer for nitrogen, argon, oxygen, LIN, LOX, LAR. Year: 2004 Hjdpsrk Na Ajfx Abhjh Working pressure: 3 bar Capacity: 12,000 L We also have other tankers available for LIN, LOX, LAR, LNG, and CO2, as well as for argon, oxygen, nitrogen, and carbon dioxide. We are happy to answer your questions by phone or email.

Stanje: rabljeno, Leto izdelave: 1986, Sheet thickness 6.0 mm Pressure 18 t Shearing angle - upper blade 90° Hodsg Ip Efspfx Abhsh Blade length 225 x 225 mm Operating voltage 380 V Total power requirement 5.5 kW Machine weight approx. 650 kg Space requirement approx. 1.10 x 0.80 x 1.05 m - Adjustable angle stops