Konični dvovijačni ekstruder + novi polži

Cincinnati Milacron CMT 35

Leto izdelave: 2003, Stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Pedpfx Asiyyf Isdysgg Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Berstorff Dvojvijačni ekstruder ZE (CL) 25 Tehnični podatki: • Leto izdelave: 1997 • Moč motorja: 11,6 kW • Ogrevalna moč: 16 kW • Hitrost vijakov: 500 obr/min Vijak: • Sokenstrujni dvojvijačni ekstruder, 2 × 25 mm × 30 D • Modularna zasnova (vijačni elementi) • 2 × območje za odzračevanje Pgodjw Iqhmopfx Adyjg • K-TRON dvojvijačni dozirnik Krmiljenje: • Klasično krmiljenje s kontaktorji • Električna omara integrirana v ohišju stroja • Ločena nadzorna plošča z upravljalno tablo • Digitalni prikazi (temperatura in tlak mase) ter različne opozorilne lučke Ostalo: • Stroj je priključen in pripravljen za preizkus • Testiranje po dogovoru možno

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1993, Performance: 1,000 envelopes/min, min./max. envelope size: 90mm x 120mm / 176mm x 254mm, roll unwinding: Contiweb, web guiding system: 1x BST, printing units: 5+0 or 4+1 doctor blade, ink containers: 4x Inkcan, ink pump: 4x pneumatic, window unit: traditional die cutters and gummed paper. Includes upper and lower slitting units, timed lubrication system, latex and dextrin sealing, infrared drying, electronic counter and monitoring. Pgedpfxotqnuxe Adysg

Stanje: pripravljen za uporabo (rabljen), An envelope printing machine Winkel + Dünnebier 26 FF is available. An on-site inspection is possible. Podpfxotq Hbfj Adysgg

Stanje: rabljeno, Leto izdelave: 2006, The Kahl twin-screw extruder is a machine manufactured by Kahl in 2006. It is currently stored in Germany and comes equipped with a fine material hopper, fine material discharge, fine material sack, belt unit (Type: BTK 1510-0), water dosing system, extruder, and intake air blower. The unit was completely overhauled in 2016. Additional features include dust extraction, tumbler sieve, dedusting, final packaging station, belt dryer, product hopper, tubular chain conveyor, cyclone, rotary valve, distributor, dust collection bag, exhaust air blower, airstream rotary dryer, feed table, mixer, as well as an additional intake air blower and belt dryer. Delivery condition is FCA (Free Carrier). Equipment: 1 x feed table, 1 x tubular chain conveyor, 1 x mixer, 1 x water intake system, 1 x extruder, 1 x intake air blower, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tubular chain conveyor, 1 x fine material hopper, 1 x fine material discharge, 1 x fine material sack, 1 x intake air blower, 1 x belt dryer, 1 x rotary valve, 1 x dust collection bag, 1 x exhaust air blower, 1 x airstream rotary dryer, 1 x dedusting unit, 1 x tumbler sieve, 1 x dedusting, 1 x final packaging station, 1 x belt unit, type: BTK 1510-0 Pgodpfx Aovfxqyedyjg Completely overhauled in 2016.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2006, Single-Screw Extruder Battenfeld BEX 1-75-30:B with Co-Extruder BEX 1-35-30:B Application: PE, PP Year of manufacture: 2006 Screw diameter: 75 mm Drive: Baumüller 171 kW RPM: 2,450 Combined output: approx. 850 kg/h In 2014, the extruder was retrofitted by Battenfeld with a frequency drive – new three-phase motor without carbon brushes and frequency inverter Pgsdoug Edkspfx Adyjg Gearbox overhauled in July 2024 Condition: the extruder is in very good condition Last application: PE pipes Battenfeld Co-Extruder BEX 1-35-30:D Application: PE pipes Connected load: 69 kVA Output: approx. 110 kg/h Year of manufacture: 2010 Condition: the extruder is in very good condition The extruder is my property Location: D-26345 Bockhorn-Grabstede, Bahnhofstr. 6 Germany

Leto izdelave: 1981, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Previous application: Production of TPE films up to 6 mm thick. Many other polymers can be processed. The line has been in operation until now and is available for inspection at any time in Nuremberg. The line consists of: Single-screw extruder Kuhne K45-24D Screw diameter: 48 mm Process length: 24D Pgedpfx Adou Ttf Njyog Drive power: Heating power: 6.0 kW Net weight: 1,150 kg Flat die: Films up to max. 330 mm width Calender Gross roller width: 1,200 mm Net roller width: 1,100 mm (max. film width) Take-off unit and flying shears

Leto izdelave: 2005, Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Parallel twin-screw extruder WEBER DS 8.5 - Manufacturer: WEBER - Model: DS 8.5 - Year of manufacture: 2005 Pgodpfouziyhox Adyog - Twin parallel screws, diameter 85 mm, 17 L/D - 5 heating zones on the barrel + 2 cooling zones - 5 die heating zones - Motor power: 56 kW - Up to 150 kg/h profile – 230 kg/h pipes Very good condition

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Gravicolor 30 GC 30-M-O-Z Manufacturer: Motan Year of manufacture: 2008 Gravimetric dosing and mixing unit, designed for direct mounting on the inlet flange of a plastics processing machine. The device allows dosing and mixing of up to 4 granulated components. Real, measured, and weighed quantities are continuously compared with setpoint values via a modern microprocessor-based control system, ensuring very high recipe accuracy (+/- 0.1%) thanks to continuous automatic optimization. The complete unit includes: - 2 supply hoppers for virgin material or regrind/virgin material - 2 supply hoppers for masterbatch or additives - 2 pneumatically controlled conical dosing heads - 2 precision motor-driven dosing screws - Material hoppers – capacity approx. 7 liters - Weighing hopper – capacity approx. 0.8 liters Pedpfx Adowm Ii Teysgg - Mixing hopper – capacity approx. 3.0 liters - Manually operated slide valve - GRAVInet controller with color touch panel, enabling recipe, regrind and process data management, vibration compensation, and continuous automatic optimization; built-in Ethernet port and standard reporting/printing functions. Technical data: - Average output: 60 kg/h - Main component dosing range: 1–100% - Additive dosing range: 0.5–10% - Power supply: 1/N/PE 230 V 50 Hz - Power consumption: 100 W - Compressed air: 6–8 bar, oil- and water-free - Weight: approx. 60 kg ✅ Piovan material loaders as shown in the photos are included in the offer.

Leto izdelave: 2010, obratovalne ure: 29.000 h, Stanje: zelo dobro (rabljeno), Catégorie : Extrudeuse bi-vis Numéro : DE27699 Fabricant : Coperion - Werner & Pfleiderer Modèle : ZSK 50 MCC+ Podpfx Adjxykcgjyjgg Année de fabrication : 2010 Diamètre des vis : 2 x Ø 50,0 mm Rapport L/D : 48:1 Moteur d'entraînement : 129 kW Détails : Co-rotative, vis et cylindre segmentés, pompe à vide, thermorégulateur, 2x alimentations latérales, 1x dégazage latéral L’extrudeuse est en très bon état et n’a que 29 000 heures de fonctionnement. Options : Système de dosage 7 voies Motan Colortronic, séchoir (Motan LA 1200/4), extraction de brins IPS, convoyeur à brins, bain d’eau, granulateur, tamis vibrant – disponible immédiatement moyennant un supplément. Cette offre ne correspond pas à vos attentes ? Veuillez visiter notre site web Plama ou nous envoyer votre demande détaillée. Nous avons des solutions adaptées à presque tous les budgets dans notre gamme.