Vertikalni obdelovalni center

CHIRON FZ 15 KWM HS

Stanje: rabljeno, Leto izdelave: 1977, Press force 250 t Stroke 40 - 190 mm Strokes per minute 40 /min Throat depth 500 mm Clearance between frame walls 1050 mm Shut height 615 mm Table area 1380 x 880 mm Die opening in table 450 mm Rsdpfxjvuuaio Ad Tjbt Table height above floor 800 mm Ram area 1200 x 800 mm Ram adjustment 125 mm Drive power 22.0 kW Weight 24.0 t Required space approx. 2.0 x 2.5 x 3.95 m (L x W x H) Approved for manual loading operations according to German accident prevention regulations (UVV) With motor, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic ram weight compensation, motorized ram adjustment, manual stroke adjustment, motorized central lubrication, bolster plate, two-hand operation

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 1991, Funkcionalnost: popolnoma funkcionalen, skupna masa: 35.000 kg, stiskalna sila: 250 t, vrsta vhodnega toka: trifazni, moč: 30 kW (40,79 KM), prebijalna sila: 250 t, vhodna napetost: 200 V, Oprema: dokumentacija / priročnik, varnostna svetlobna zapora, AIDA NC2-250(1) 250t Eccentric Press in Excellent Condition /ctA2/ Manufacturer: AIDA Model: NC2-250(1) Rbsdou Dxb Topfx Ad Tst Press Force: 160t Year of Manufacture: approx. 1991 Stroke Length: 170 mm Clearance Over Table: (adjustable) 280–400 mm Table Dimensions: 2700 x 760 mm Ram Dimensions: 2100 x 700 mm Electrical Supply: 3x200V (!!), 30kW – Japanese standard Net Weight: 35,000 kg Dimensions: 2760 x 2800 x 3980 mm Automatic lubrication system. Automatic cutting oil dosing – RAZIOL EST-02 Optional with Decoiler and Straightener.

Stanje: dober (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, Grinding wheel 508x254 (305) mm, regulating wheel 330x254 (305) mm, regulating wheel speed 0-115 rpm, grinding wheel peripheral speed 45 m/sec, grinding diameter 2-150 mm, grinding wheel drive 45 kW, machine weight 6.5 t, required space approx. 3.0x1.5 m. Before sale, the machine will be fitted with a new Siemens S7 control system including a new operator panel, and the dressing quill for the grinding wheel is electrically actuated via servo motor. The machine will be thoroughly checked, with defective parts repaired or replaced. Various options possible (coolant system, loading/unloading devices, workpiece rulers, etc.). Rbedpfxeuy Ifgs Ad Tjt

Stanje: rabljeno, Technical Details: Grinding length: 12,000 mm Grinding width: 2,800 mm Workpiece height: 2,510 mm Max. workpiece weight: 24,000 kg Table area: 11,990 x 2,500 mm Clearance between columns: 2,820 mm Crossbeam adjustment: 2,510 mm Table feed: 1 - 40 m/min Total power requirement: 110 kW Approx. machine weight: 151 t Approx. space required: 32.5 x 9 x 6.73 m The machine is in very good condition and suitable for grinding with the highest precision! In 2022, mechanical components were refurbished by WALDRICH COBURG for approx. EUR 600,000. Equipped with SIEMENS 840 D CNC control 1 universal grinding support, 22 kW Swiveling grinding spindle +/- 110° Peripheral grinding wheel dimension: Ø 700 x 130 mm Vertical adjustment: 1,000 mm Rsdpfowc A Snex Ad Tebt with dressing device 1 peripheral grinding support, 30 kW Grinding wheel dimension: Ø 600 x 150 mm Vertical adjustment: 230 mm with dressing device Coolant and filter unit Various grinding wheel mounts

Leto izdelave: 1985, Stanje: rabljeno, Workpiece diameter: 25-90 mm Thread length: 3000 mm Thread pitch: 2-16 mm Total power requirement: 25 kW Machine weight: approx. 10.5 t Space requirement: approx. m Rbodpfjtzdyzox Ad Tjt O F F E R We are pleased to offer you, subject to prior sale and error, ex stock without obligation. WALDRICH COBURG Whirling/peeling machine for the production of threads, worms, ball screws or similar workpieces Model: 16 GSL 25-90 / 3 m Year of manufacture: 1985 _____ Thread diameter: 25 - 90 mm Maximum thread length: 3,000 mm Thread depth: Pitch range: 2 – 16 mm Maximum pitch angle up to Ø 55 mm: 15 degrees Maximum pitch angle up to Ø 90 mm: 8 degrees Stepless whirling head speed: 285 – 1,700 rpm Workpiece speed: 0.5 – 68 rpm Bore of the clamping spindle and tailstock: 90 mm Whirling head drive: approx. 4 kW Total drive: approx. 25 kW - 380 V - 50 Hz Weight: approx. 10,500 kg Accessories / Special equipment: • Stable whirling/peeling unit with 2 leading and 2 trailing pneumatic steady rests with integrated prism guides. Manual adjustment of thread depth and optical pitch angle setting at the carriage. • Powered tool head, normally equipped with 4 tools: 2 base cutters, 1 flank cutter, and 1 deburring cutter. • Workpiece speeds and pitch feed are finely adjustable via change gears. Separate rapid traverse for the return of the whirling support. • Simple peripheral indexing device for whirling multi-start threads. • Retrofitting device for whirling threads longer than the center width using intermediate support. • For correcting pitch errors of the leadscrew, thermal expansion of the workpiece, or errors during retrofitting, the machine is equipped with a compensation system. This allows both electronically programmed compensation of the leadscrew and workpiece-specific linear compensation via a wedge system. • Motor-driven tailstock with automatic stop by contact pressure sensor • Extensive accessories, including cutting tools, tool holders, collets, accessory parts, setting devices, gauges, and service tools. • Central lubrication, coolant system, separate control cabinet, operating manuals The machine is suitable for pre- and finish whirling of single and multi-start right-hand and left-hand threads, worms, ball screws or similar workpieces!

Stanje: rabljeno, Leto izdelave: 1988, obratovalne ure: 1 h, številka stroja/vozila: V 516, skupna širina: 2.000 mm, skupna dolžina: 7.000 mm, skupna višina: 1.800 mm, obratovalni tlak: 300 letvica, stiskalna sila: 90 t, maks. debelina aluminijaste pločevine: 5 mm, moč: 11 kW (14,96 KM), lastna masa: 16.000 kg, rezalna sila: 90 t, leto zadnje generalne obnove: 2025, Package dimensions: 400x400 mm Pressing force, stage 1: 900 kN Pressing force, stage 2: 900 kN Steel throughput: 2,500–3,500 kg/h Aluminium throughput: 2,000–3,000 kg/h Drive power: 11 kW Installation area: 7 x 2 x 2.5 m Rbodslhqd Ropfx Ad Tot Machine weight: 16 t With wheels or oil collection tray Location: Austria Available from: 30/01/2026

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, Wheel diameter - max. 100 mm Wheel width 26 mm Module - max. 3 Module - min. 0.1 Control system Siemens 840 D SL Operating hours 9,598 h Total power requirement 45 kW Machine weight approx. 7 t Space requirement approx. 4x3x2.5 m Gleason 100S Gear Shaping Machine for manufacturing internal and external cylindrical gears and other regularly recurring rollable profiles and shapes on the cylindrical workpiece circumference, as well as for single-piece production of profiles. Technical specifications: Nominal workpiece diameter 100 mm Maximum rotating diameter 150 mm Nominal module of the machine approx. 3 mm (reference value depending on the respective machining task) Stroke spindle speed range 0 - 3,000 rpm Manual stroke position adjustment range 20 mm Maximum gear width 26 mm Minimum rise height of hydrostatic Rbjdev Ehbbepfx Ad Tjt skew guide 400 mm Minimum/maximum distance between tool and workpiece spindle -20/+180 mm Column tilt range (manual) -1/+11° Tool holder (manual clamping) HSK-D63 (Hollow shank taper according to DIN 69063) Machine weight approx. 7,000 kg with robot cell

Stanje: rabljeno, Stainless steel welded tube production line MOD.70/120, manufactured by OLIMPIA 80 with tricathodic welder, seam roller, and orbital polishing Specifications: - Diameter: 35 – 120 mm - Wall thickness: 0.7 – 3.5 mm - Length: 3 – 6 m Tube diameter: 35 – 120 mm Tube length: 3 – 6 m Rsdovtn H Tjpfx Ad Tsbt

Stanje: zelo dobro (rabljeno), Current gauge width approx.: 25.0 m Outreaches: - Fixed support usable (possible)/total (possible) max. approx.: 18.5 (21.5)/22.0 (25.0) m - Pivoting support usable/total max. approx.: 12.5/16.5 m Lifting height under spreader current/possible approx.: 11.3/14.0 m Manufacturer / Rebuild: TAKRAF / TEICHMANN Rbedpfxsd N D U Ds Ad Tst Rebuilt: 2019

Stanje: rabljeno, Leto izdelave: 2011, Funkcionalnost: omejena funkcionalnost, prehod palice: 51 mm, skupna masa: 6.000 kg, capacità barra 51 mm - tre torrette - tre assi Y - portautensili fissi/rotanti - caricatore barre LNS Sprint 552 nuovo nel 2011 - controllo Fanuc Redpfx Aswvvyrod Tjbt