CHARMILLES ROBOFORM 35

CHARMILLES ROBOFORM 35

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2002, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, skupna masa: 2.500 kg, število osi: 3, This 3-axis CHARMILLES ROBOFORM 35P die-sinking EDM machine was manufactured in 2002. It features a travel range of 350 mm on the X-axis, 250 mm on the Y-axis, and 300 mm on the Z-axis, with a maximum workpiece weight of 500 kg. The machine is equipped with a 32-position rotary tool changer and a high-speed Z-axis to enhance performance. If you are looking for a high-quality die-sinking EDM machine, consider the CHARMILLES ROBOFORM 35P we have for sale. Please contact us for further details. • Table dimensions: 400 x 500 mm • Maximum workpiece weight: 500 kg • Dielectric capacity: 400 l • Rotary axis: C-axis • Z-axis type: High-speed Z-axis • Tool interface: Combination chuck • Tool changer: 32-position rotary magazine Dedpfey Idtksx Aplscg • Electrical: 380 V, 3 Ph, 50 Hz, 5 kVA, 5 A • Safety: Integrated fire extinguishing system Additional equipment: • Eckert chiller • Measuring probe (touch probe)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, obratovalne ure: 9.192 h, potovalna razdalja osi X: 1.200 mm, pomik osi Y: 900 mm, pomik po osi Z: 500 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, največja hitrost vretena: 16.000 obr/min, število osi: 3, This 3-axis vertical machining center HERMLE C 1200 was manufactured in 2009. It offers an impressive X-axis travel of 1200 mm, a Y-axis travel of 900 mm, and a Z-axis travel of 500 mm. The machine is equipped with a spindle speed of 16,000 rpm and features 30 tool stations. If you are looking for high-quality machining capabilities, you should consider the HERMLE C 1200, which we are offering for sale. Contact us for further details. • X axis – 1200 mm • Y axis – 900 mm • Z axis – 500 mm • Machining Center C 1200 V • Heidenhain iTNC 530 contouring control • Spindle speed 16,000 rpm • Taper SK 40 • 30 tool stations • Rigid clamping table • Coolant system • Electronic thermal compensation (iTNC) with temperature sensors at the motor spindle and machine bed • Gantry design with closed rear wall for significantly improved support under torsional loads • Two axes are located in the tool, resulting in excellent mass distribution and ideal conditions for high rapid traverse rates and feedrates • Leadscrew diameter and pitch (X and Z axes): 40 / 20 mm • Leadscrew diameter and pitch (Y axis): 50 / 20 mm • Direct measuring system • Resolution: 0.0001 mm • Positional tolerance (Tp) in X-Y-Z axes according to VDI/DGQ 3441: 0.010 mm • Recommended ambient temperature to maintain accuracy: 20°C ± 1°C • Flushing/washing system for the lateral working area Dodpfsylw Stex Apljcg • Display: 15" TFT color flat screen • Flexible contour programming • Part program memory • Tool diameter capacity: 80 mm • Tool diameter with free adjacent pockets: 125 mm • Maximum tool length: 300 mm • Maximum tool weight: 8 kg • Maximum magazine load: 120 kg • Tool change time chip-to-chip according to VDI 2852: 6.5 seconds • Handheld control unit with electronic handwheel, axis direction keys, feed override, rapid traverse, emergency stop and enabling switch • Machine on time – 11,927 h • Spindle on time – 9,192 h Additional Equipment • Chip conveyor • Heidenhain touch probe • Electronic hand-control module (iTNC) Technical Specification Taper Size: SK 40

Stanje: dober (rabljeno), Leto izdelave: 2000, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, teža obdelovanca (maks.): 500 kg, Charmilles Roboform 35 Dcedjyyxbtepfx Aplsg Leto izdelave: 2000 C-okvirna zasnova Fiksna miza z odrivnim rezervoarjem Pomiki: X=350 mm, Y=250 mm, Z=300 mm Maks. velikost obdelovanca: X=780 mm, Y=400 mm, Z=300 mm Maks. teža obdelovanca: 500 kg Maks. teža elektrode: 50 kg Razdalja miza - vpenjalni sistem: 150 - 450 mm Delovni tok: 64 amperov Isopulse generator Linearni stekleni merilni letev z ločljivostjo merjenja 0,5 µm Vključno s pnevmatskim vpenjalnim sistemom Erowa ITS 50/3R Systems Neto teža stroja: 2800 kg Dimenzije stroja (D x Š x V): 1900 x 1690 x 2400 mm Stroj je bil do pred kratkim še v uporabi pri našem kupcu in je popolnoma delujoč.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, obratovalne ure: 27.265 h, Funkcionalnost: popolnoma funkcionalen, Charmilles Roboform 35 z robotom QCRI leto izdelave: 2001 obratovalne ure: 27.265 x, y, z: 355 x 255 x 305 mm Dedpoyh E A Nefx Aplscg C-os z Erowa vpenjalom Erowa vpenjalo na mizi Erowa tipalo magnet 3 x aluminijasta paleta Erowa 320 x 320 mm 35 x nosilec elektrode 50 x 50 mm QCRI robot 4 x prostor za paleto na mizi 54 x mesto za nosilec elektrode dokumentacija in diskete stroj je priključen na elektriko za ogled.

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 750 kg, potovalna razdalja osi X: 350 mm, pomik osi Y: 220 mm, pomik po osi Z: 220 mm, lastna masa: 2.450 kg, Charmilles Robofil 240 Year of manufacture: 2001 Travel ranges (X / Y / Z): 350 x 220 x 220 mm Travel ranges (U / V): 350 x 220 mm Max. taper angle: +/- 30° at 220 mm height Integrated Collision Protection (ICP) on all 5 axes Maximum workpiece dimensions: 1000 x 550 x 220 mm Maximum workpiece weight: 750 kg Cutting speed up to 300 mm²/min Best surface finish: Ra 0.22 µm Dcodpfxswqdrre Aplsg Available wire diameters: 0.10 mm to 0.33 mm Overall system dimensions: 2020 x 2050 x 2000 mm Total system weight: 2450 kg The machine will be cleaned, overhauled, and tested by us prior to delivery. We are happy to offer you the commissioning of the machine.

Stanje: nepreverjeno (rabljeno), Leto izdelave: 2002, Funkcionalnost: nepreverjeno, številka stroja/vozila: 251070/641311, potovalna razdalja osi X: 350 mm, pomik osi Y: 300 mm, pomik po osi Z: 300 mm, širina mize: 400 mm, dolžina mize: 500 mm, Brez minimalne cene – zagotovljena prodaja najvišjemu ponudniku! Stroj se prodaja na dražbi zaradi zaprtja podjetja. Oddaja ponudbe zavezuje k pravočasnemu prevzemu med 26.01.2026 in 29.01.2026! TEHNIČNI PODATKI Pomik X-os: 350 mm Pomik Y-os: 300 mm Pomik Z-os: 300 mm Mere mize: 500 x 400 mm PODROBNOSTI O STROJU Električni podatki Obratovalna napetost: 380 V Frekvenca: 50 Hz Nazivni tok: 5 A Priključek: 5 kVA Mere in teža Djdpfsxqpv Tsx Aplocg Dimenzije (D x Š x V): 3.000 x 2.000 x 2.600 mm Teža: 3.000 kg OPREMA Ustrezen delovni pult Vpenjalna orodja Bakrene elektrode Dokumentacija

Leto izdelave: 2001, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, Machine extensively overhauled with a value of EUR 18,000 Optional configuration QCRI 54/8: available, see images Component placement automation: available, see video Dcodon Arnxopfx Apljg Flushing (pressure): 1 x through workpiece, 1 x through electrode, 2 x lateral Flushing (suction): 1 x through workpiece Central automatic lubrication system via NC on all axes TECHNICAL DETAILS Travel path (X, Y, Z): 350, 250, 300 mm Max. manual feed rate: 900 mm/min Electrode weight: max. 20 kg Workpiece weight: max. 40 kg Magazine configuration: 54/8 Electrodes: 54 units Electrode dimensions: 70 x 70 x 200 mm Plates: 8 units Workpiece dimensions: (4x) 320 x 320 x 270 mm, (4x) 320 x 320 x 170 mm Worktable: 500 x 400 mm T-slots: 3 x 12 mm Slot spacing: 125 mm Available clamping systems: Erowa IST 3R Macro Megatool GPS 70 MACHINE DETAILS Dimensions (H x L x W): 2400 x 1900 x 1690 mm

Stanje: dober (rabljeno), Leto izdelave: 1998, Teile, die per Hand angezeigt werden, sind nicht im Lieferumfang enthalten. Technische Daten sind auf dem Bild ersichtlich. Dedpfxowb Aqno Aplecg

Stanje: rabljeno, Leto izdelave: 2008, x-axis travel: 410 mm y-axis travel: 570 mm z-axis travel: 140 mm Control: Mazatrol Matrix Maximum machining diameter: 545 mm Maximum machining length: 519 mm Main spindle speed: 35 - 6,000 rpm Tool holder: Capto C6 Rapid traverse (X/Y/Z axes): 30/26/33 m/min Performance / Capacity: Maximum swing: 545 mm Maximum machining diameter: 545 mm Maximum outside diameter for bar work: 51 mm Maximum machining length: 519 mm Maximum workpiece weight: - Chuck work: 150 kg - Bar work: 200 kg Main Spindle: Spindle speed: 35-6,000 rpm Spindle bore diameter: 61 mm Maximum torque: 161 Nm Tailstock: Rapid traverse: 8 m/min Travel range (engaged/retracted): 434/281 mm Milling Head: Type: Single spindle with ATC Tool shank type: Capto C6 Tool dimensions: External turning tool: 20 mm Internal turning tool: 32 mm Milling tool: Max. 90 mm diameter x 200 mm length Milling spindle speed: 15-12,000 rpm Equipment/Accessories: -Chip conveyor -Mist extraction -Tools Dcodpfxoyt R Ide Aplsg -Documentation

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, Baty SM350 Profile Projector – Powerful Inspection for Demanding Applications The Baty SM350 is a high-end profile projector featuring a 350 mm screen and a robust, precision-machined stage with a measuring range of 250 mm x 125 mm. It is ideal for high-precision optical inspection in environments where reliability and accuracy are of utmost importance. XLS: A simple 2-axis digital readout for X and Y measurements, ideal for basic applications. MX200: This model expands the functions to include geometric measurements, such as calculation of angles, radii, and distances. It also enables the creation of tolerance reports. FT2: The most advanced version features a touchscreen interface with Fusion 2D software. This variant includes optical edge detection and comprehensive reporting capabilities, including SPC charts and DXF overlays. The device is equipped with a 3-position lens turret that allows for rapid and effortless switching between different magnification lenses without the need for recalibration. With the FT2-E display option, the SM350 also delivers advanced measurement capabilities such as edge detection and DXF overlays. These features make it the ideal solution for detailed inspections and demanding measurement tasks in manufacturing environments. Dcedeuyh Rpepfx Apljg