Projekcijski varilni stroj

CEA BSW 50

Stanje: rabljeno, Leto izdelave: 2020, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.500 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, RepairFIT by Dornhöfer The Difference. Including installation & commissioning! TECHNICAL KEY DATA Year of manufacture: 2020 Travel/capacities: Longitudinal (X): 3,000 mm Vertical (Y): 1,500 mm Cross (Z): 1,500 mm Clamping surface NC rotary table: Rotary indexing table: 2,400 x 1,900 mm Max. transport load (with centrally supported load): 10,000 kg Positioning accuracy arc/sec: ± 2.5" Max. swing diameter: approx. 2,900 mm Paintwork: RAL 7024 graphite grey RAL 7038 agate grey Tool holder: DIN 69871 AD (ISO50) Big Plus Pull stud: DIN 69872 Form A Main spindle drive: Motor/brand main spindle drive Heidenhain Max. drive power: 32 kW from 376 rpm Max. torque: 1,085 Nm (constant up to 376 rpm) Speed control/gearbox: 3-stage (oil-cooled) with automatic shifting Spindle speeds 6,000 rpm: low range rpm 0-738 mid range rpm 739-1,842 high range rpm 1,843-6,000 Axis drives/axis feed rates: Axis drive motors: brand Heidenhain (digital drives) Rapid traverse max.: X, Y, and Z axis 25,000 mm/min Feed rate max.: X, Y, and Z axis 15,000 mm/min Max. average acceleration: 2 m/s² Max. feed force: X, Y, and Z axis 26,000 N Linear axis drive systems: X-axis (longitudinal): preloaded ball screw Ø 63 x 40 Z-axis (vertical): preloaded ball screw Ø 63 x 20 Y-axis (cross): preloaded ball screw Ø 50 x 20 Guide system: Ffodjygiwqjpfx Abvsw X-axis (longitudinal) 6 pcs. type INA RUE 55 EL Z-axis (vertical) 4 pcs. type INA RUE 65 EL Y-axis (cross): 8 pcs. type INE RUE 55 E-HL and additional damping unit Clamping table / table surface: T-slot size 10x: 22 H 12 mm Reference slot center 1x: 22 H 8 mm T-slot spacing: 150 mm (pitch spacing outer slots 1,800 mm) Weight: Weight RT3000: approx. 32,000 kg Connected load: approx. 53 KVA Heidenhain TNC 640HSCI Automatic tool changer with 80 positions Automatic oil-cooled milling head 2.5° x 1° 2 chip conveyors Coolant system with boost to 37 bar IKZ Special operating mode 4 RepairFIT is our proven offer for a profitable entry into our product lines. Machines offered in this line are sourced by us following a strict selection process and subjected to a thorough inspection (deep-dive check). After intensive cleaning, any identified obvious defects and faults are professionally rectified by our expert service team.

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, We offer for sale a complete SCHLATTER multi-point automatic steel wire welding line. We have three fully operational production lines available. Automatic machines for the production of cross wires (so-called straightening and cutting machines) are also available. Fedpfx Abetvpilevefw Additionally, we have a wide selection of individual spot welders for steel wires.

Leto izdelave: 2010, obratovalne ure: 29.000 h, stanje: zelo dobro (rabljeno), Catégorie : Extrudeuse bi-vis Numéro : DE27699 Fabricant : Coperion - Werner & Pfleiderer Modèle : ZSK 50 MCC+ Année de fabrication : 2010 Diamètre des vis : 2 x Ø 50,0 mm Rapport L/D : 48:1 Moteur d'entraînement : 129 kW Détails : Co-rotative, vis et cylindre segmentés, pompe à vide, thermorégulateur, 2x alimentations latérales, 1x dégazage latéral L’extrudeuse est en très bon état et n’a que 29 000 heures de fonctionnement. Fodpfxexykcge Abvefw Options : Système de dosage 7 voies Motan Colortronic, séchoir (Motan LA 1200/4), extraction de brins IPS, convoyeur à brins, bain d’eau, granulateur, tamis vibrant – disponible immédiatement moyennant un supplément. Cette offre ne correspond pas à vos attentes ? Veuillez visiter notre site web Plama ou nous envoyer votre demande détaillée. Nous avons des solutions adaptées à presque tous les budgets dans notre gamme.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, delovna širina: 215 mm, varilna moč (maks.): 750 kVA, Kompletna tovarna za varjenje armaturnih mrež/izdelavo rešetkastih nosilcev Tovarna obsega: - Linija za varjenje mrež SCHLATTER PG 24, polavtomatska, leto 2002 - Linija za izdelavo rešetkastih nosilcev SMEI, popolnoma avtomatska, leto 2003 - Stroji za ravnanje in rezanje Ffodpfeqy Ek Asx Abvjw 1x Wafios R4 2x VITARI NR16 1x VITARI NR10 - Linija za hladno vlečenje SMEI, vhodna žica max. 10 mm, hitrost - 4 m/s - Stroj za zvarjanje (butt welding) SMEI - Novi stroj za ostrenje žice SMEI

Stanje: novo, Leto izdelave: 2025, Punkcijski varilni stroj / Namizni punkcijski varilni stroj – aktualna izvedba letnik 2025 – nova naprava Krmiljenje TE 101 z digitalnim prikazom varilnega toka Nazivna moč 20 kVA/50 % ED Priklop na omrežje 400 V Kratkostični tok 19 kA Varilni tok 15,2 kA Varovalka 63 A Dovod/ faza 25 mm² Sila elektrode 187 daN pri 6 bar Izvitje 160 mm Stožec elektrode MK1 Masa 81 kg - 2-stopenjsko nožno stikalo - Glavno stikalo - Pnevmatska vzdrževalna enota s filtrom Ffodpfxoh Nu A Nj Abvjw - Stroj je naš demonstracijski stroj - Stroj je možno po dogovoru in predhodnem terminu predstaviti v Dresdnu

Stanje: rabljeno, Leto izdelave: 2022, Kartonirka vključno z napravo za vroče lepljenje. Naprava ima malo obratovalnih ur. Primerna je predvsem za izdelke, ki jih je mogoče vstaviti v karton s strani. Ffsdsvb E Evspfx Abvew

Leto izdelave: 2005, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Parallel twin-screw extruder WEBER DS 8.5 - Manufacturer: WEBER - Model: DS 8.5 - Year of manufacture: 2005 - Twin parallel screws, diameter 85 mm, 17 L/D - 5 heating zones on the barrel + 2 cooling zones - 5 die heating zones Ffsdeuziyhspfx Abvsw - Motor power: 56 kW - Up to 150 kg/h profile – 230 kg/h pipes Very good condition

Stanje: rabljeno, Leto izdelave: 2014, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 6.000 obr/min, hitrost vretena (min.): 20 obr/min, RepairFIT by Dornhöfer The Difference. Including Installation & Commissioning! TECHNICAL MAIN DATA Year of manufacture: 2014 Travel ranges / Axis travels: Longitudinal (X): mm 3,000 Cross (Y): mm 1,200 Vertical (Z): mm 1,500 Clamping table / Table area: Length: mm 3,200 Width: mm 1,000 Number of T-slots on the table surface: Units: 7 T-slot size: mm 22H12 Reference slot: mm 22H7 Distance between slots: mm 140 Max. workpiece load: kg 11,000 Paintwork: Graphite grey RAL 7024 and agate grey RAL 7038 Tool holder: ISO 50, DIN 69871 AD Pull stud: DIN 69872 Form A Main drive: Max. drive power: From 198 rpm kW 30 Spindle speed range: Spindle speed: min⁻¹ 20–6,000 Max. torque: Nm 935 Spindle speed control: 3-stage (oil-cooled) With automatic changeover Feeds: X-, Y- and Z-axis mm/min 2–15,000 Max. rapid traverse speed: X-, Y- and Z-axis mm/min 25,000 Max. feed force: X-, Y- and Z-axis: N 22,000 Space requirements: Length approx. BT3200 mm 8,100 (without cross conveyor + 1,280mm) Height approx. (at Z=1,500mm) mm 3,800 Width approx. (at Y=1,200mm) mm 5,000 (with spacer 4,500mm) Weight: kg approx. 20,200 Connected load: kVA approx. 52 HEIDENHAIN iTNC 530 HSCI Automatic MTE universal milling head Diagonal 2.5° x 2.5° Automatic tool changer with 40 positions Fedpfsygipajx Abvjfw 2 chip conveyors + cross conveyor Coolant system with 20 bar & ICS (internal coolant supply) RepairFIT is our proven solution for a profitable entry into our product lines. The machines available in this line are procured after a strict selection process and undergo a thorough inspection (deep-dive check). After intensive cleaning, any obvious faults and defects identified are professionally repaired by our skilled service team.

Leto izdelave: 1991, stanje: pripravljen za uporabo (rabljen), A Huron CNC bed milling machine is available. Travel distances X/Y/Z: 2400mm/1000mm/1000mm, control: Heidenhain TNC 415. An on-site inspection is possible. Fodpfx Asv Ubp Rebvjfw

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, delovno območje: 1.000 mm, For sale is a fully refurbished Schlatter radiator welding line, consisting of: - Support part feeder (EBV) - 2-row multi-point welding machine (hydraulic) - 2-row convector welding machine (pneumatic) - Longitudinal seam welding machine (NFR) - Cross seam welding machine (NQD) - Cut-to-length shear (TS10) - Corner punching machine (ESV) - Cross edge closing unit (QRSV) - Transport & turning unit (TVW) - Nipple & spacer welding unit (NIAH) Ffodpfx Asv Edlvobvow - Test basin (water) Control system: Siemens S7 TIA The radiator welding line is only available fully refurbished.