130G MOTORNI GREDER

Caterpillar 130G

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2003, obratovalne ure: 5.610 h, Ponujamo kombajn New Holland - CR980 - žitni kombajn - letnik 2003, delal do konca žetve, v odličnem stanju, po servisu. Vabimo vas na ogled na naši kmetiji blizu Olsztyna. - Pozimi garažiran. - Delovne ure mlatišča: 4147 - Delovne ure motorja: 5610 Nkodpfx Aoxu E Ersbbet Priporočamo!

Stanje: dober (rabljeno), Leto izdelave: 2002, From company liquidation: Nkedpfx Ajt Iklkebbjt Peddinghaus Peddimax 1002 Year of manufacture: 2002 Maximum punching and shearing force: 1000 kN Punches 31 mm holes in 25 mm steel Cuts up to 500 mm at the flat bar shear for material thickness up to 18 mm steel Contact length stop Extensive accessories (special punches) Special punching device SV 90 for holes up to 90 mm Weight: approx. 3,000 kg

Stanje: novo, Leto izdelave: 2025, obratovalne ure: 1 h, Digging depth: 1.65 meters Lifting capacity: up to 150 kg Ground pressure: 0.35 kg/cm² Working pressure hydraulic system: 160-210 bar Dimensions: 255 x 90-110 x 222 cm (LxWxH) Slewing range: 360°, with a slewing speed of 13 rpm Articulated boom Joystick control Nsdpsvz Ih Tefx Abbokt Adjustable undercarriage Technical specifications: Manufacturer: HZC Power GmbH Model: DKB991 Engine: Koop diesel engine with 9.5 HP / 7 kW Cooling: Hydraulic oil cooler Max torque: 25 Nm Max. speed: 3600 rpm Digging force: 5.5 kN, lifting force: up to 150 kg Fuel tank capacity: 5.5 liters Electric starter: 12 volt Max climbing ability: 25° Maximum speed: 2 km/h Ground pressure: 0.35 kgf/cm² Undercarriage dimensions: 1090 x 180 x 320 mm (LxWxH) Hydraulic oil tank capacity: 17 liters (HLP46) Pump type: gear pump Swing radius: 360° Swing speed: 13 rpm Hydraulic pump: gear pump Working pressure: 160 bar Maximum pressure: 210 bar Bucket breakout force: approx. 650 kg Hydraulic flow: 30 liters per minute Digging depth: 1650 mm Dump height: 2150 mm Reach at ground level: 3000 mm Dimensions: 2550 x 900-1100 x 2220 mm (LxWxH) Lifting force: 600 kg Product/shipping weight: 940 kg Features: Articulated digger arm (120°), hydraulically adjustable chassis from 90 cm to 110 cm, additional hydraulic port on the digger arm for hydraulic accessories

Stanje: dober (rabljeno), 1 x drilling and tapping machine Wörner BG 16 with pneumatic feed (manual drilling also possible) cooling system Technical data: Spindle speeds: 95 - 3,500 rpm Nodpfxoipyiwo Abbokt (24 steps via pulley, 2 via motor) Spindle taper: MK 2 Drilling capacity in steel: 16 mm Thread cutting in steel: M 8 The machine can be inspected under power.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, moč: 55,4 kW (75,32 KM), skupna masa: 2.050 kg, vrsta goriva: dizel, barva: originalen, konfiguracija osi: 1 os, obratovalna teža: 2.050 kg, lastna masa: 2.050 kg, gorivo: dizel, Technical Data: - Log diameter up to 24 cm - Feed width: 300 mm - Base weight: approx. 2,050 kg - Year of manufacture: 2022 - 4-cylinder Hatz turbo diesel engine - With Common Rail technology and diesel particulate filter (DPF) - Complies with EURO 5 emissions standard - Mounted on single-axle chassis for 80 km/h - Power Control System - Water-cooled 4-cylinder Hatz turbo diesel engine, 55 kW (74.8 HP), with Common Rail technology and DPF - Fully galvanized single-axle chassis (80 km/h) - Tow bar with inertia brake - Front jockey wheel - Rear support stand - Road lighting compliant with StVZO (impact-protected) - Heavy-duty tires 205/65 R17.5 (EX) - Hydraulically adjustable feed speed to regulate chip size - Resharpenable chipping knives for long service life (approx. 10 times) - PowerGrip feed roller, 300 mm wide, with hydraulic feed - Exceptionally aggressive, grippy, and consistent feeding, each roller driven by its own hydraulic motor - Discharge chute with adjustable deflector flap, swiveling - Discharge chute mounted on ball bearing turntable - Key machine components with noise insulation Features: Engine and Chassis: - Water-cooled, Stage V 4-cylinder Hatz Common Rail turbo diesel engine with DPF, rated at 55.4 kW (75.3 HP) - Automatically operated heavy-duty overrunning clutch between engine and flywheel protects engine, bearings, and shaft - Fully galvanized, corrosion-resistant single-axle chassis for speeds up to 80 km/h with TÜV certification - Robust, fixed steel fenders - Front jockey wheel and rear support stand - Height-adjustable tow bar with inertia brake and soft-dock ball coupling or DIN towing eye - Road lighting per StVZO, with impact-protected components - Heavy-duty tires 205/65 R17.5 - Fuel level gauge for easy monitoring - EU homologation Housing / Hopper / Discharge Chute: - Rotatable chipping unit housing, adjustable feed angle up to 270° - Folding feed hopper with minimum feed depth of 1,500 mm - Fully galvanized hopper flap for durability - Hopper dimensions (internal): width = 1,160 mm, height = 1,040 mm - Swiveling discharge chute with adjustable deflector flap - Discharge chute mounted on ball bearing turntable for flexibility - Noise insulation for key machine components such as the chipper hood and chute - Emergency stop button located on top of hopper and on hopper flap side Chipping Unit: - Safety circuit according to EN 13525 - Flywheel/chipping disc diameter: Ø 800 mm, thickness: 40 mm - Enclosed knife system for quick and safe knife changes - Infinitely adjustable chipping knives, resharpenable for long service life - Horizontal counter-blade usable on four sides, vertical anvil blade usable on two sides for extended service - Wrap protection at main flywheel bearing Nodpov Evx Uefx Abbekt Hydraulic Feed: - Feed control with independent hydraulic circuit - PowerGrip feed roller (300 mm wide) with hydraulic drive for secure and consistent material feed - Parallelogram-guided upper roller for uniform feeding without jamming - Hydraulically adjustable feed speed to regulate chip size - Hydraulic oil tank level indicator.

Stanje: rabljeno, Technical Details: Welding current: 500 A Machine weight approx.: 128 kg Dimensions (L x W x H): 1.2 x 0.8 x 1.2 m Control: Welding current display with 2/4-stroke switch, pulse function, stepless adjustment Nodpsvz Abhefx Abbjkt Cooling system: Water-cooled with antifreeze protection Shielding gas: Solenoid valve without pressure regulator Welding torch assembly with 4.0 m hose package Torch head: Gas-cooled Earth clamp with 4.7 m earth cable Wire feed: 4-roller drive for wire Ø 1.0/1.2 mm

Leto izdelave: 2025, Stanje: novo, ⭐️4-Post Automotive Workshop Lift⭐️ Nkodjw Ta I Topfx Abbot TM-GROUP 4SF-4000B - 4 Ton Automatic WHEEL ALIGNMENT / GEOMETRY HIGH-QUALITY OIL AND INSTALLATION KIT INCLUDED FOR FREE Specification: ✅ Manufacturer: TM-GROUP ✅ Maximum lifting capacity: 4 tons ✅ Type: Automatic ✅ Underside connection ✅ Power supply: 400V (230V optional) ✅ Lifting time: 60 seconds ✅ Lifting height: 1750 mm ✅ Limit switch: Yes ✅ Motor power: 2.2 kW ✅ Telescopic rolling jack arms, allowing vehicle lifting under the side sills ✅ Turntable plates (with locking option) ✅ Pre-installed turntable locations ✅ Self-lowering ramps ✅ Automatic locks create a blocking threshold for the vehicle ✅ Anchoring kit included: Yes ✅ Hydraulic oil 10L: Included free ✅ Compliant with requirements for UDT certification: Yes ✅ Ramp length: 4250 mm ✅ Ramp width: 918-1118 mm Is this lift suitable for me? The automatic four-post lift is suitable for handling virtually any passenger car, from a 2-door coupe to large 4x4 off-road vehicles. The 4000kg (4T) lifting capacity also allows it to handle smaller commercial vans. This lift provides full servicing and repair capabilities for larger and heavier vehicles. What about the range of repairs? Our lift is ideal for wheel alignment, suspension, engine, or gearbox repairs. The high lifting (175 cm to the base of the tire—practical lifting increased by half the wheel diameter) allows for any inspection. Documentation: The lift is supplied with all necessary documentation: ✅ Declaration of conformity with CE certificate ✅ Operating manual in English ✅ Rolling jack included FREE!

Stanje: zelo dobro (rabljeno), The fully hydraulic high-speed production band saw is equipped with a universal hydraulic system for exclusive or alternating cutting of thin- and thick-walled profiles as well as solid materials, all without changing the saw blade, thanks to a uniform tooth pitch of 3 or 4 teeth per inch. The machine features a pre-tensioned saw frame guide, enclosed oil hydraulics, triple swivel bearing, separate coolant system, steplessly adjustable hydraulic cutting pressure, lifting movement and accelerated return stroke, and is standard-fitted with a stepless mitre setting device. The saw frame can be lifted in rapid traverse mode. A pivoting vice ensures optimum utilization of the saw blade. Longitudinal guidance with ground and hardened guide rails transfers the cutting forces to the saw frame. Automatic end stop. Push-button control for ON/OFF functions and rapid traverse of the saw frame. Manufacturer: KASTO Type: PSB 280 U Drive power: 2.2 kW Stroke frequencies: 40/51/64/80/102/128 strokes/min Cutting speed: 11/14/19/22/28/38 m/min Universal hydraulics: standard Saw feed: hydraulic Nodexdwbkspfx Abbskt Cutting range round: 280 mm yCutting range flat: 280 x 150 mm Mitre range: 0-45° Material support height: 600 mm Weight: 650 kg Length/width: 1500 x 600 mm Height: 1000 mm Saw blade dimensions: 450 x 40 x 2 mm Year of manufacture: 1988 Accessories: coolant system, rapid lowering, rapid lifting

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Buderus GE515 nizkotemperaturni 455 kW Nkodpfx Aow Ey Dasbbot

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, vrsta goriva: dizel, barva: rumena, Leto izdelave: 1997, obratovalne ure: 7.028 h, Produktbeschreibung Gebrauchter Komatsu Radlader Hergestellt von KOMATSU Modell WA150-3 Betriebsstunden: 7.003 Std. Nodpfx Abjumq Hxebekt Angetrieben von Diesel-Motor Maschine wird im derzeitigen Zustand verkauft Bitte kontaktieren Sie: VIJAY JPN Industrial Trading Pte Ltd 13A Pandan Crescent, Singapur 128478