Časnikarstvo zavora

Bystronic Xpert 40/1030

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 28.300 h, številka stroja/vozila: 16500126, Pressure: 400 kN Total bending length: 1030 mm Standard stroke [S]: 200 mm Clearance [D]: 515 mm Distance between uprights: 1060 mm Table width: 60 mm Backgauge X-axis travel range: 500 mm X-axis stroke: 300 mm X-axis traverse speed: 1500 mm/s R-axis stroke: 100 mm R-axis traverse speed: 500 mm/s Z-axis travel: 955 mm Z-axis rapid traverse speed: 2000 mm/s Y-axis rapid traverse speed: 300 mm/s Max. Y-axis bending speed: 25 mm/s Y-axis positioning accuracy: 0.004 mm Oil capacity: 100 l Main drive power: 7.5 kW Weight: 4 t Length, approx. [L]: 1520 mm Width, approx. [W]: 1584 mm Height without extended clearance and stroke, approx. [H]: 2449 mm 1. Intelligent control system and exceptionally low-noise drive (below 75 dB) in the Xpert 40 enable part production with approx. 30% lower energy consumption compared to conventional electrically driven machines. 2. ByVision software with 22-inch LCD touch display 3. Smart process control guidance with Energy Saver 4. Automatic tool protection system 5. Foot pedal 6. Electrically operated protective sliding doors 7. User manual on CD 8. Ambient temperature: 7°C to 35°C 9. Voltage: 400 V, 50 Hz, 3 Ph 10. "Bend G2" – optical safety system with manual height adjustment 11. 6-axis backgauge (additional 3 axes) 12. 3-backgauge set - Xpert 40 (N0002.0040.000) – Kit for integrating a third backgauge in the press brake Fjdpfxjwv N Nas Ah Djpn 13. Ergonomic LED lighting package, Light intensity – 1500 lux 14. Ergonomic front supports with table, Max. load capacity: 35 kg 15. "At hand" tool cabinet – accommodates 3m of tools within easy reach (1 punch set and 2 die sets) 16. Optical bending guidance system – an optical guiding system assists the operator throughout the entire bending process 17. Ergo Bending Line Laser – Bystronic laser bending line serves as an operator assistant by projecting the bending line onto the material surface. The operator is supported by a virtual bending line if the backgauge fingers cannot be used (fully or partly). The laser bending line can be set at various heights (e.g. 55 / 100 mm) depending on die height, material thickness, or part size. 18. Productive XPT clamping package (WILA NSCL II upper tool clamping and T12/90 table) 19. WILA hydraulic clamping package includes upper and lower tool clamping with T12/90 table 20. WILA NSCL II/XPT upper tool clamping (Productive clamping pack XPT) – XPT (Wila) style upper tool clamping allows orientation of the tool at 0 and 180° 21. T12/90 table (Productive XPT clamping package) – T12/90 table, 90 mm high and 72 mm wide, providing ample space for Z-bends. The machine is fully operational and in continuous operation. Viewings and test runs are welcome.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, obratovalne ure: 35.389 h, številka stroja/vozila: 16500019, For sale we offer a used Bystronix Xpert 40/1030 press brake. The machine is in very good condition, still connected and can be inspected by appointment. Technical Data: Year of manufacture: 2016 Serial number: 16500019 Operating hours: 35,231 / Bend cycles: 1,315,743 and counting (machine is still in use) 6 axes Xpert 40 Pressing force: 400 kN Bending length: 1,030 mm Open height: 515 mm Standard stroke: 200 mm Y-axis approach speed (up to): 300 mm/s Y-axis working speed (up to): 25 mm/s Xpert 40/1030 Length: 1,520 mm Fodpjixl R Tjfx Ah Dspn Width: 1,584 mm Height: 2,449 mm Pressing force: 400 kN Bending length: 1,030 mm Standard stroke: 200 mm Open height: 515 mm Distance between side frames: 1,060 mm Table width: 60 mm Max. back gauge range X-axis: 500 mm X-axis travel: 300 mm X-axis speed: 1,500 mm/s R-axis travel: 100 mm R-axis speed: 500 mm/s Z-axis travel: 955 mm Z-axis speed: 2,000 mm/s Y-axis approach speed (up to): 300 mm/s Y-axis working speed (up to): 25 mm/s Y-axis accuracy: 0.004 mm Oil capacity: 100 l Main motor power: 7.5 kW Weight: 4 t Tooling (dies and punches) can be purchased at additional cost. Location of the machine: 89-600 Chojnice The Bystronic remains connected and can be inspected and tested by prior arrangement. If interested, please contact us.