Upogibni stroj

Bystronic PR 250x5100

Stanje: rabljeno, Pneumatic folding and edging machine FASTI Type 606 - 11 - 1.0 Seaming machine for pre-bending sheet metal seams For producing a folded edge Edge folding machine for thin sheet metal as an alternative to press brakes Serial No. 9166002 Year of manufacture: 1991 Csdpfxodzqbls Afnjpw Working length: 1100 mm Material thickness at 45 kg/mm²: 1 mm Compressed air requirement: 6 bar - Pneumatic foot switch - Roller adjustment via knurled threaded screws Space requirement (L x W x H): 1600 x 300 x 1050 mm Weight: approx. 250 kg Good condition A seam is the doubling of the sheet metal at the edge, i.e. folded once to increase the rigidity of the sheet. Folding creates a rounded edge, which reduces the risk of injury from sharp sheet edges. Ideal for processing sheet metal for furniture manufacturing, cladding panels, or for HVAC and silencer production.

Stanje: zelo dobro (rabljeno), Offered is a used solids pump / dirty water pump. SDAG Wismut-Aue. Cpsdpfxshwnfcs Afnew For further details, please refer to the photos.

Stanje: pripravljen za uporabo (rabljen), Maximum forming capacity at full length: 9 gauge (mild steel), equivalent to approx. 3.8 mm; max. forming length: 3200 mm; minimum flange height: 6 x material thickness; clamping beam speed: maximum speed: 91.44 mm/s, downward: 39.88 mm/s; bending speed: 1879.6 mm/s; bending angle range: 0°-180°. Dimensions X/Y/Z: approx. 5160 mm / 2220 mm / 1780 mm; weight: approx. 5300 kg. Codpfjtia Hhjx Afnopw

Stanje: novo, Leto izdelave: 2026, For sawing, for example, stainless steel, tool steel, hollow sections, and solid materials. Two-pole drive motor enables saw band speeds of 30 and 65 m/min. Electromechanical blade tension monitoring via microswitch. When raising the saw arm, the lowering cylinder locks in the upper position via the solenoid valve—no additional locking at the cylinder is needed. Saw arm inclined by 25°, resulting in longer saw band service life. Precise and robust band guides with adjustable carbide plates. After completion of the cutting process, the saw band stops automatically in the lower end position. Lowering of the saw arm by gravity or manually. With steplessly adjustable, constant saw arm lowering speed via hydraulic cylinder. Dimensions and weights Length approx. 1200 mm Width/depth approx. 650 mm Height approx. 1800 mm Weight approx. 270 kg Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Machine data Saw band speed(s): 30 / 65 m/min Speed settings: 2 Saw band length: 2450 mm Saw band width: 27 mm Saw band thickness: 0.9 mm Material feed Table height material feed: 925 mm Cutting ranges 0° round (tube): 220 mm 0° round (solid material): 120 mm 0° rectangular (hollow section, horizontal): 230 x 150 mm 0° bundle (tube): 230 x 120 mm -45° round (tube): 160 mm -45° round (solid material): 85 mm -45° rectangular (hollow section, horizontal): 160 x 90 mm -60° round (tube): 90 mm -60° round (solid material): 55 mm -60° rectangular (hollow section, horizontal): 90 x 90 mm Item no.: 3680001 Cedpfx Asg U Uv Rofnopw Location: In stock, 54634 Bitburg - Immediately available -

Stanje: rabljeno, Leto izdelave: 2003, stiskalna sila: 260 t, Hydraulic Press Brake Make: HACO Model: ERMS 60-260 Year of manufacture: 2003 Technical Specifications Manufacturer: HACO Cjdpfx Aswkttrsfnopw Model: ERMS 60-260 Year: 2003 Pressing force: 260 t Bending length: 6000 mm Dimensions (L x W x H): approx. 7.0 x 2.0 x 3.70 m Weight: approx. 31 t Equipment • Digital control ATS 560 • Fiessler safety light curtain (front) • Centrally adjustable crowning • Amada tooling system • Controlled axes: Y1, Y2, X • R-axis manual • 1 set upper tool • 1 set lower tool All information is provided without guarantee. A demonstration is possible at any time in the showroom.

Stanje: rabljeno, Leto izdelave: 1987, Technical Details: Pressing force: 200 t Bending length: 4000 mm Cpjdpfx Afeu Icc Ajnjw Distance between uprights: 3530 mm Control for programming: DNC 7000 Max. stroke: 220 mm / min: 200 mm Throat depth: 320 mm Approach speed: 70–80 mm/sec Working speed: 10 mm/sec Return speed: 49 mm/sec Backgauge: 700 mm, motorized Table dimensions (L x W): 4110 x 180 mm Working height: incl. table extension mm Interface: RS 232 Connection voltage: 380 V Total power requirement: 15 kW Machine weight approx.: total: 17.0 t Machine dimensions (L x W x H): 4.6 x 1.6 x 3.3 m Heavy-duty welded steel construction Possible operating modes: manual, semi-automatic, fully automatic incl. 2 table extensions Back support 700 mm travel, motorized and 2 support arms with 1500 mm travel, motorized, right/left Operation via control panel with emergency stop as well as electrical foot switch Hydraulics: max. pressure 318 bar; oil capacity approx. 170 liters; pump output 19.3 l/min. Control DNC 7000, graphical display, PC software Equipment: Cutting zone lighting Stroke counter Tooling optional *

Stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, Löser centreless tube grinding machine - belt grinding machine - centreless tube polishing machine - cylindrical grinding machine Centreless tube grinding/polishing machine for workpieces with a minimum length of 1,100 mm. The machine was built in 1988 and completely overhauled in 2012. During the overhaul, the machine was converted for polishing applications and has since only polished around 10,000 parts. Following that, the machine was taken out of operation. As part of the complete overhaul, all motors, bearings, and the entire control cabinet, including frequency converters, were replaced with new components. The machine is suitable for both wet grinding and polishing. Cjdpjpugwiefx Afnjpw A wastewater treatment unit, including pumps, is currently not available. However, we can retrofit this as per customer requirements. The conveyor systems (roller conveyors) between the grinding stations must also be retrofitted to suit your workpieces. The machine can process tube diameters from 10 mm to 160 mm. The grinding/polishing motors offer a power output of 7.5 kW per station. The system can be inspected by appointment in our warehouse at D-63128 Dietzenbach.

Stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, skupna masa: 22.800 kg, stiskalna sila: 250 t, CNC Press Brake Manufacturer: Weinbrenner Model: GP250 Machine Specifications: - Crowning system - Die shifting - Back gauge, Type 2 Cpjdpfx Aor Sxq Refnjw - Front bending aid (disassembled for transport) - DNC 900PS control system All documentation for the machine is available.

Stanje: nepreverjeno (rabljeno),

Leto izdelave: 1992, stanje: pripravljen za uporabo (rabljen), Working length: 4300 mm, pressing force: 2000 kN, connected load: 15 kW, weight: 18 t, including bending tools. Cpsdoi Dx Sbspfx Afnew