Stranski nakladalnik

Bulmor JDQ 60/12/47

Stanje: novo, Leto izdelave: 2025, Laserski vir: Raycus ali Max: 4/6/8/12 kW Laserska glava: 3D BOCI Krmilni sistem: FSCUT 5000 A Vpenjalna glava: 20–450 mm Nakladanje/razkladanje: 12000 mm X-/Y-os Natančnost pozicioniranja: ±0,05/1000 mm Ponovljivost: ±0,03/1000 mm Pospešek: 0,8g (m/s²) Rotacijska hitrost: 60 obr/min Maks. pozicionirna hitrost: 60 m/min Maks. teža cevi: 1500 kg 1. Raycus 6000W laserski vir 2. Ozobljena (bevel) laserska glava 3. Varjen okvir DPL 4. Schneider električni elementi 5. Poševno zobati letev KH 6. Reducir Techmech 7. Yaskawa servomotor 8. Vodila SHAC 9. Integrirano krmiljenje napajanja 10. Programska oprema FScut 5000 11. Integrirana električna omara Gcedpfxsi Apfzo Ab Tea 12. HANLI hladilnik vode 13. Konzolna MOSTNA os-X FHBS 14. Avtomatsko zbiranje odpadkov 15. Gosenični avtomatski zbiralnik obdelovancev 16. Avtomatski podpornik 17. Okvir za nalaganje 12000 mm 18. Okvir za razlaganje 12000 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2021, obratovalne ure: 1.260 h, nosilnost: 5.000 kg, dvižna višina: 25.000 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 3.050 mm, moč: 115 kW (156,36 KM), dolžina vilic: 1.200 mm, lastna masa: 18.900 kg, skupna dolžina: 7.840 mm, vrsta pogona: Diesel, gradbena širina: 2.490 mm, Rotating Telehandler Load Centre: 500 mm Mast Type: Telescopic Transmission: Hydrostatic Speed Class: 20 km/h Condition: Ready for operation and fully functional Technical Condition: Good Front Tyres Type: Pneumatic Front Tyres Size: 445 / 65 R22.5 Front Tyres Condition: 80 - 100% Rear Tyres Type: Pneumatic Rear Tyres Size: 445 / 65 R22.5 Gcjdpfexdpdkjx Ab Toa Rear Tyres Condition: 80 - 100% Description: The alternative to a mobile crane, wheel loader or telehandler. The Manitou MRT 2550 Privilege Plus rotating telehandler is the ideal construction machine. It is capable of lifting loads of up to 5,000 kg and performing tasks at heights of up to 25 m. This 3-in-1 machine (telehandler + crane + work platform) offers versatile application possibilities for daily use. The four-section boom and 360° rotation allow various handling operations to be carried out from a fixed position. The telehandler is equipped with the E-Reco attachment recognition system, which saves you time by informing you of the suitable working envelope and ensures greater safety by automatically detecting potential overloads. 3rd hydraulic valve, rear work lights, front work lights, cab heating, work platform pre-installation with radio remote control, fork carriage PFB/1320 mm, forks 150 x 50 x 1200 mm, load guard, 7'' LCD colour display, automatic parking brake, return line, tyres 445/65 R 22.5, reversing alarm, beacon, attachment recognition system, CAN BUS control, AdBlue.

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Welding rotary table Protec KT 300 H, 170/400 special version Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-action chuck diameter 300 mm, surcharge €550 Quick-action chuck diameter 400 mm, surcharge €750 Crank gear motor with stepless adjustment 0–90° Infinitely variable speed: 0.01 to approx. 5 rpm Gsdpfx Ajrypmgob Tsca Incl. foot remote control Digital display with welding time limitation (optional)

Stanje: novo, Leto izdelave: 2025, nosilnost: 10.000 kg, 10-ton tank turning device, self-centering roller bed 380 V, steplessly adjustable speed from 200 to 1200 mm/min. Suitable for diameters from 300 mm to 3500 mm Roller diameter: 270 mm x 120 mm Support rollers temperature resistance: 100°C Gcodpfjg Sz Urox Ab Toa Twin drive system Includes hand and foot remote control, complete set Digital speed display

Stanje: rabljeno, Leto izdelave: 1997, The press brake was manufactured in 1997 in England at the EDWARDS PEARSON factory. The bending press is in good condition and is being sold complete with tooling. It has always been serviced and maintained on schedule. The machine is connected and can be demonstrated or inspected on site. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Godsrfx Utjpfx Ab Tsca Bending force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other: Newly replaced display, connected keyboard for easier operation. If you have any further questions, we will be happy to assist you.

Stanje: novo, Pre-bending: 10.0 mm Sheet length: 2550 mm Sheet thickness: 13.0 mm Total power requirement: 15.0 kW Approx. weight: 10,600 kg Dimensions (LxWxH): 4.76 x 1.66 x 1.59 m Image similar Bending performance: 13.0 mm » with 3x top roll diameter Pre-bending: 10.0 mm » with 1.5x top roll diameter Top roll diameter: 270 mm Lower roll diameter: 250 mm Side roll diameter: 220 mm Max. opening: 50 mm Working height: 1,155 mm • Fully hydraulic drive of the top and bottom rolls via planetary gear • Digital readout for side roll positions • Hydraulic drop-end bearing • Infinitely variable rolling speed • Cone bending device • Hardened rolls • Hydraulic side roll adjustment synchronized via PLC • Hydraulic lower roll adjustment via torsion shaft • Pressure-adjustable lower roll • Electrical and hydraulic overload protection • Mobile control panel • Machine and equipment in accordance with CE directives See catalogue via the following link:       Gsdpfx Asd Ab H Iob Tsca Important notes for conical rolling: • The max. sheet thickness is 50% of the nominal capacity • The cone length may be max. 30% or must exceed 60% of the roll length • Hardened rolls are recommended

Stanje: novo, Leto izdelave: 2024, nosilnost: 300 kg, Protec KT 300 H welding positioner, 170/400 special edition Horizontal load capacity: 300 kg, tilted load capacity: 150 kg Power supply: 220 V, 50 Hz Table diameter: 450 mm Hollow shaft diameter: 170 mm Table height: 500 mm Welding current transmission: 400 A Quick-change chuck, diameter 300 mm: surcharge €550 Quick-change chuck, diameter 400 mm: surcharge €750 Gsdpfxsrypmvs Ab Tjca Crank gear motor, continuous adjustment from 0 to 90° Variable rotation speed: 0.01 to approx. 5 rpm Including foot remote control Digital display with welding time limitation (if required)

Stanje: rabljeno, lastna masa: 9.820 kg, največja dovoljena obremenitev: 35.180 kg, skupna masa: 45.000 kg, prva registracija: 04/2014, naslednji pregled (TÜV): 06/2024, dolžina tovornega prostora: 9.500 mm, širina tovornega prostora: 1.530 mm, vzmetenje: drugo, velikost pnevmatike: 385/65 R 22,5, barva: drugo, vrsta prenosa: drugo, velikost sprednje pnevmatike: 385/65 R 22,5, voznikova kabina: drugo, emisijski razred: noben, Concrete inloader, concrete inloader, inloader for concrete elements Wheelbase (mm): 6640 to end of vehicle * Support device * BPW half-axles * Spare wheel * Landing leg * Hydraulic suspension * Hydraulic axle compensation * Hydraulic internal swing arm * Platform length: 2,950 mm * Pump unit * Drum brakes * 6-way manual tensioning * Fully lowerable * Central lubrication system We expressly reserve the right to prior sale, as we also offer this item on other platforms. Accessories are listed without guarantee; changes, prior sale, or errors excepted. We strongly recommend and offer viewing and inspection to avoid any misunderstandings regarding the condition and suitability for the buyer. Inspections and tests can be arranged by appointment at any time and are expressly encouraged. We handle all formalities and deliver the vehicle with the desired transfer plates at an extra charge. Some images have been edited and are for initial viewing purposes only; please contact us if interested and request current pictures. Gcodpfx Asvv T S Tob Tja

Stanje: dober (rabljeno), Leto izdelave: 1992, številka stroja/vozila: 20106, Offer 25100 Technical Data: - Pressing force: 200 t - Working width: 3050 mm - Distance between side frames: 2550 mm - Table width: 180 mm - Throat depth: 250 mm - Installation height: 400 mm - Approach speed: 80 mm/sec - Working speed: 6.7 mm/sec Gcjdpowbgizjfx Ab Tja - Return speed: 67 mm/sec - Ram stroke: 150 mm - Adjustable range of fixed stops: 120 mm - Drive: 400 V / 14.5 kW - Space requirement: approx. W 3800 x H 2980 x D 1700 mm - Weight: approx. 11,500 kg Equipped with: - Back gauge with 2 stop fingers - Gooseneck tool - 4-way universal die - Two-hand control console, foot pedal,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2019, obratovalne ure: 1.990 h, nosilnost: 5.000 kg, dvižna višina: 25.000 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 3.050 mm, moč: 115 kW (156,36 KM), dolžina vilic: 1.200 mm, lastna masa: 18.900 kg, skupna dolžina: 7.840 mm, vrsta pogona: Diesel, gradbena širina: 2.490 mm, Rotating telehandler Load centre: 500 Mast type: Telescopic Transmission: Hydrostatic Speed class: 20 Condition: Ready for operation and fully functional Technical condition: Good Front tyre type: Pneumatic Front tyre size: 445 / 65 R22.5 Front tyre condition: 80 - 100% Rear tyre type: Pneumatic Rear tyre size: 445 / 65 R22.5 Rear tyre condition: 80 - 100% Gcjdpfsx Alpmjx Ab Tsa Description: The alternative to a mobile crane, wheel loader, or classic telehandler. The Manitou MRT 2550 Privilege Plus rotating telehandler is precisely the right construction machine. It is capable of lifting loads up to 5000 kg and working at heights of up to 25 m. This 3-in-1 vehicle (telehandler + crane + work platform) offers a wide range of daily applications. Its four-section boom and 360° continuous rotation enable various handling operations from a fixed position. Features: - 3rd hydraulic valve, - Work platform pre-installation with radio remote control - Fork carriage PFB/1320 mm - Forks 150 x 50 x 1200 mm - Load guard - 7" LCD colour display - Automatic parking brake - Return line - Tyres 445/65 R22.5 - Reversing alarm - Rotating beacon - Attachment recognition system - CAN-BUS control - AdBlue