Ravnanje in vroče ločitev stroj

BUENDGENS UDR

Stanje: zelo dobro (rabljeno), Leto izdelave: 2004, Wide slot die Serial No.: L 1081-041391 // Smoothing unit Serial No.: F 1201-041392 Take-off unit Serial No.: F 1201-041392-T Max. winder speed: 50 m/min. Type: Film line with 1080 mm usable width Equipment / Further details: Max. gross PP output up to 1000 kg/h with film width up to 1200 mm Special feature: winder system allowing the slitting of narrow films (150 mm - 100 mm) or, for example: 8 x 175 mm or 2 x 700 mm A die lip for maximum film thickness up to 2 mm, up to 1000 kg/h. Total power consumption: 211 kW/h Main motor capacity: 250 kW Min. film thickness in PS: 0.68 mm / Min. in PP: 0.75 mm Maximum calender speed: 50 m/min mechanically possible Consisting of: - Maguire 5-compartment dosing unit - Extruder (screw dia. 160 mm) Amut EA 160 // Year: 2003 Bsdpfx Aljw Tbr Hstedf - Screen changer (for cleaning in food production) - Melt pump - Wide slot die (1 insert) 120 cm - Die lip for film thickness up to 2 mm, up to 1000 kg/h - Calender 140 cm - Thickness gauge SBI TMD-EC/140.20.200.R - Post-cooling rollers (4 pcs.) - Winder (film buffer during roll change) - Cutting machine & film haul-off - Film winding unit (3 pcs.) - Mill MAZZA CBS 25 40 2T18 // Year: 2003 Complete available infrastructure: control cabinets, pumps etc.

Leto izdelave: 2018, stanje: pripravljen za uporabo (rabljen), A DMT lathe is available. Centre distance: 1000 mm, swing diameter over bed/cross slide: 420 mm/210 mm, bed height: 340 mm, spindle bore: 64 mm, spindle diameter: 115 mm, spindle speed: 4000 rpm, quill diameter: 60 mm, quill stroke: 140 mm, cross slide width: 210 mm, cross slide length: 640 mm. Machine dimensions X/Y/Z: approx. 2150 mm/1150 mm/1700 mm, weight: approx. 1800 kg, control system: Heidenhain, operating hours: approx. 300 h. Documentation available. On-site inspection is possible. Bdjdpfx Alowtg H Rotef

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine -Clamping table: 400 x 1100 mm -Arm reach: 930 mm Bsdpeirax Ujfx Altedf -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: pripravljen za uporabo (rabljen), Baler HSM VK 42/1200 fully automatic Pressing force: 42 tons Bdjdpfx Ajra Nrxjltof Bale dimensions: 700 x 800 x 600 – 1200 mm Bale weight: approx. 450 kg Press length: approx. 7 meters Press weight: approx. 6,000 kg Tying: 4x automatic wire tying

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, A complete 5-layer co-extrusion blown film line with 5 extruders and all peripheral equipment is available. Overall system dimensions (L/W/H): 14m/22m/11m. Die head: Kiefel Worms FSBK 500 with IBC, die diameter: 500mm, film width range: 700mm-2000mm, haul-off width: 2000mm, winding width: 2000mm, line speed: 120m/min, melt output: 500kg/h, total power requirement: approx. 300kW. 1) Double winder by Wintech, winding width: 2000mm, film thickness range: 35µm-150µm, max. roll diameter: 1000mm, max. roll weight: 1900kg, core inner diameter: 152mm/6 inches. 2) Extruder Kiefel Worms 70.29D, power: 89kW, screw: 5-zone barrier screw, speed: 125rpm, overhauled: 2010. 3) Adhesion-promoting extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 4) Central extruder Kiefel Worms 50.25D, power: 34kW, screw: 3-zone core progressive screw, speed: 175rpm. 5) Adhesion-promoting extruder Kiefel Worms 50.25D for the outer layer, power: 34kW, screw: 3-zone barrier screw, speed: 200rpm. 6) Outer layer extruder Kiefel Worms 80.25D, power: 125kW, screw: 5-zone barrier screw, speed: 150rpm. 7) Film calibration device Reinhold SRK 200/9.6. The entire line is controlled by a Plast Control system. Further features include: integrated width measurement, C-Scan for profile measurement, web guiding system, corona treatment, and film draw-off. Included: one spare 5-layer FSBK die head with IBC, spare rollers, ring gap blower with filter, extraction units, crane, and external control terminal. Documentation available. On-site inspection possible. Bodpfxev T An Ss Altodf

Leto izdelave: 2018, stanje: novo, Load capacity: max. 1,000 kg Coil inner diameter: min. 400 mm Coil outer diameter: max. 1,100 mm Bodpfxodx Ryyj Altsdf Coil height: max. 800 mm

Stanje: rabljeno, Technical Details: Bodjvc Ax Nopfx Altodf Pressing force: 100 t Installation height: Table/Ram top position: 800 mm Throat depth: 360 mm Ram stroke: 500 mm Ram advance speed: 200 mm/s Ram return speed: 200 mm/s Table size: 750 x 560 x 90 mm Passage in table: Ø 26 mm Ram mounting surface (W x D): 530 x 400 mm Pin hole in ram: Ø 50 mm Cylinder diameter: Ø 250 mm Height above floor: 720 mm Total power requirement: 17.0 kW Approx. machine weight: 5.5 t Approx. machine dimensions (L x W x H): 1.8 x 1.2 x 3.2 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, izvrtina vretena: 160 mm, Premer struženja nad ležiščem Ø: 1040 mm Premer struženja nad saneh: 710 mm Premer struženja v jamici Ø: 1580 mm Bjdpfoxtbf Eex Altsdf Dolžina struženja: 3000/4500 mm Dolžina jamice: 1500 mm Premer vretena: 160 mm Moč vretena: 40 kW Širina ležišča: 800 mm Vpenjalni stožec vretena: 6 Mk Teža obdelovanca: 3500 kg Hitrost vrtenja: 800 o/min Pomik X-os: 10000 mm/min Pomik Z-os: 10000 mm/min

Stanje: novo, Turning diameter: 325 mm Turning length: 1000 mm Swing diameter over cross slide: 250 mm Swing diameter in bed gap: 440 mm Speeds: 12 (85-2000) rpm Tailstock MT 3 Quill stroke: 100 mm Quill diameter: 40 mm Spindle mount: DIN 55027 No. 5 Spindle bore: 32 mm Longitudinal feed: 0.006 - 1.77 m/min Cross feed: 0.003 - 0.885 m/min Total power requirement: 2.2 kW Machine weight approx.: 770 kg Space requirement approx.: 2150 x 950 x 1350 mm Equipment: - Coolant system - Machine lamp - Chip guard rear wall - Spindle guard - Chuck guard Bdjdpfx Aletycpaetof - Tool holder guard - Change gears *Special equipment: - 3-jaw chuck Ø 160 mm Type 3204/ DIN6350, BISON - MULTIFIX quick-change tool post Type A, incl. 4 tool holders - 2-axis digital readout DRO Newall - Foot pedal with brake function CE

Stanje: novo, Pressure: 8.5 kN Stroke: 40 mm Throat depth: 95 mm Working height from/to: 95 - 240 mm Table surface: 160 x 110 mm Spindle diameter: 25 mm Machine weight: approx. 27 kg Dimensions (L x W x H): 160 x 230 mm Direct-acting pneumatic presses deliver the full pressing force throughout the entire stroke length. They are used primarily when long-stroke parts need to be processed with consistent force. Bdodpefv Awaofx Altjf Outstanding Engineering: • Long and precise spindle guidance for maximum dimensional accuracy • Hardened and ground piston rod for virtually unlimited service life • Double-acting cylinder with end position cushioning on both sides • Double guide rings on the piston for constant, smooth operation • Oil-resistant sealing elements Special features of the PND series: • Spindle secured against rotation • Spindle return on PND 85/S via only one cylinder chamber – saves additional air • Working height fine adjustment is easy, fast and precise in 2 steps: – Basic adjustment by simply loosening the clamping screws on the stand – Precision fine adjustment via the stroke limitation ring on the piston rod Additional advantage: Faster cycle times and air savings