Tračna izravnalna naprava

BSA Richtmaschine

Stanje: novo, Leto izdelave: 2025, Technical Data / Equipment Leveling Machine: R65/360 • Strip width: 30 - 360 mm • Strip thickness (min-max): 0.6 - 4.0 mm • Clear opening for strip thickness: max. 4.00 mm • Max. leveling cross-section: 800 mm² at R02=350 N/mm² or 150 x 4 mm • Leveling speed: 2 - 20 m/min • Number of leveling rollers: 7 • Leveling roller diameter: 65 mm • Number of pull rollers: 2 • Pull roller diameter: 65 mm • Motor power: 2.2 kW / 3x400V RK Machine body designed as an extremely rigid and torsion-free welded construction RZ Leveling and pull rollers made from high-quality steel, surface-hardened and precision-ground, mounted in maintenance-free rolling bearings AG Drive, via helical geared motor with double chain drive EM Self-regulating drive via frequency inverter, with WM measuring system, loop control for self-regulating drive, with ultrasonic sensor and sensor in the material loop RZ Leveling roller adjustment, individually adjustable by hand, readable via dial gauges RO Exit roller basket, fixed layout with a radius for 3 mm material thickness PZ Pull roller adjustment pneumatically operated from the control panel BSF-ze Edge guide, manually adjustable both centrically and eccentrically by 25 mm SS-2 Interface to press: Hedpfxowhfxze Af Tjng

Stanje: novo, Leto izdelave: 2025, Material width: 100 mm Material thickness: 15 mm Number of straightening rollers: 9 Straightening speed: 7 m/min Total power requirement: 0.75 kW Machine weight: approx. 380 kg Space requirements: approx. 710 x 920 x 1360 mm Hodourni Ujpfx Af Tjng Equipment: - 5 powered bottom rollers - 4 adjustable top rollers - Max. cross-section: approx. 800 mm² - Mobile use on castors - Operating manual

Stanje: novo, Leto izdelave: 2025, Še en stroj na voljo takoj! Briketirka s krmilnikom PLC in avtomatiko za dolžino briketa Zmogljivost: do največ 60 kg/h Briket: 50 mm valjaste oblike Motor: 5,5 kW Dimenzije: 1.900 x 1.350 x 1.410 mm Teža: pribl. 860 kg. Zahteve: Izhodni material idealno krajši od 25 mm dolžine ostružkov Vsebnost vlage 6–12 % ATRO Stroj je primeren za občasno delovanje. Npr. do 2,5 ure briketiranja, 1 ura premora itd. Hodpfev Rpxlsx Af Tong Če naj stroj deluje neprekinjeno več kot 2,5 ure, je treba priključiti opcijsko hlajenje.

Stanje: kot nova (razstavni stroj), Leto izdelave: 2021, številka stroja/vozila: 06 61 218, Ref. No.: Lg 32821 Hnsdpfx Afjg U Utve Tjg Single-Sided Decoiler BBT ABH 2000/400 Exhibition machine, unused Machine No.: 06 62 218 Year of manufacture: 2021 Technical Data Load capacity approx.: max. 2,000 kg Strip width: max. 400 mm Inner coil diameter: approx. 450 to 520 mm Outer coil diameter: max. 1,500 mm Unwinding speed: approx. 2 to 15 rpm Equipped with adjustable drive and loop control via ultrasonic sensor (analog). Drive by frequency-controlled three-phase gear motor. Expansion of carrying segments manually via hand crank and joints Number of carrying segments: 3 Coil lateral guidance achieved by robust, lockable boundary arms. Decoiler stand constructed in heavy-duty box design, fabricated as welded assembly. Additional Equipment: Shutdown for "loop too small" via antenna switch, mounted on the column of the base housing of the loop control. Height infinitely adjustable. Strip side guide on the base housing of the loop control, via lateral guide rods. Pass-through width infinitely adjustable.

Stanje: zelo dobro (rabljeno), 3-phase direct current spot welding machine DALEX Type PMS 11-4 G 3 Rated power at 50% duty cycle: 96 kVA Secondary short-circuit current: 44.5 kA Secondary open-circuit voltage: 4.72 V Electrode force: 100–600 daN Arm reach: 550 mm with mounted control cabinet according to VDE 0100 Hnedpfshmvawex Af Tsg Main switch Synchronous welding controller 8033 Weight: 740 kg

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, Drive: Servo motor Maximum strip width: 300 mm Strip thickness: 0.5 – 4.0 mm Maximum cross section: 1,200 mm² Feed length: 0 - 9,999.9 mm Hsdpfxjr H Dwio Af Teng Accuracy: +/- 0.05 mm Roller diameter: 80 mm The feed rollers are hardened and ground. Raising the upper roller for strip insertion is performed via pneumatic cylinder and valve. The contact pressure of the upper roller is applied pneumatically via short-stroke cylinders. The upper roller is mounted torsion-resistant, thus preventing unilateral roller pressure. Off-center strip transport is permitted. An entry roller guide, an adjustable strip side guide, and strip end detection on the entry side are included as standard. Protective covers on feed rollers and drive components. Intermediate venting is switchable on and off.

Stanje: rabljeno, Leto izdelave: 1984, Material width: 350 mm Coil weight: 1 t Material thickness: 0.5 - 6 mm Coil inner diameter: 380 - 540 mm Coil outer diameter: 1500 mm Number of straightening rollers: 9 Straightening roller diameter: 30 mm Number of feed rollers: 2 Straightening machine weight: 2 t Space requirement for straightening machine (W x D x H): 2.0 x 2.0 x 1.9 m Hedet Hmk Tepfx Af Tjng Decoiler weight: 1.3 t Space requirement for decoiler (W x D x H): 1.7 x 1.5 x 1.6 m

Leto izdelave: 1980, Stanje: dober (rabljeno), 17 straightening rollers, Ø 90 mm Hsdpfx Aednzvdsf Tsng Strip width: 50 - 200 (250) mm Strip thickness: 2 - 10 mm

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2013, obratovalne ure: 420 h, dvižna višina: 9.900 mm, dvižna moč: 454 kg/m, vrsta goriva: električni,

Stanje: novo, Sweeping width 1750 mm Machine weight approx. 300 kg Space requirements approx. 2100 x 1450 x 1000 mm Hedpsu H N Tlofx Af Teng Sweeper for forklift, wheel loader, yard loader Working width 1750 mm Debris collection container 250 l With level compensation and front support wheel PPN brush roller, 520 mm diameter, splash guard Debris hopper with hydraulic emptying Mechanical sweeping angle adjustment Height-adjustable support wheels with metal rims Hydraulic drive, hoses and couplings included Additional bearing on the hydraulic motor Fork pockets W/H: 200 x 70 mm - Made in Germany