Koordinatni merilni stroj

Brown & Sharpe DEA Scirocco 140907

Stanje: rabljeno, Leto izdelave: 2001, Dolžina struženja 470 mm Maks. premer struženja 390 mm Število vrtljajev vretena 3500 obr/min Pomiki X/Z – 235/520 mm Število postaj v revolverju 12 kos Krmiljenje: Hodpfxoxdfi Nj Abhsh MSG 500 Oprema: Različni nosilci orodij

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 930088, Country of manufacture: CH Voltage: 400V / 50/60Hz / 3ph. Net weight (machine + control cabinet): 3,250 kg + 400 kg Customs tariff number: 8456.30 20 Dimensions: 260 x 281 x 225 cm TECHNICAL SPECIFICATIONS Type of machining: immersion Maximum workpiece dimensions: 1200 x 700 x 400 mm Maximum workpiece weight: 1,500 kg Table dimensions: 900 x 600 mm Floor to table distance: 900 mm Total dielectric volume: 1,200 L X, Y, Z, U and V axes Hodpfx Abew Ucyuohjh Travel X, Y, Z: 550 x 350 x 400 mm Travel U, V: 550 x 350 mm Collision protection: X, Y, U, V, Z axes Taper cutting, max. angle: +/- 30° / 400 mm Available wire diameters: Ø 0.25 mm (options 0.1/0.2/0.3 mm) Wire guide type: closed diamond, no gap Available spool weight and type (DIN standard): 1.6 kg (K 100) to 8 (K 160) Available spool weight and type (JIS standard): 3 (P3) to 5 (P5) Dielectric Paper filters: 2 cartridges Dielectric temperature: +/- 1°C Total deionization resin volume: 20 L Maximum injection pressure: 20 bar Generator: dual Isopulse source Power supply: 380/400V 3-phase Total power: 10 KVA Maximum cutting speed: 400 mm²/min Minimum achievable surface roughness: 0.20 micron Ra Measuring system: glass linear scales Measuring resolution: 0.5 micron Servomotors: AC type All technical data is given without obligation and subject to errors or omissions.

Stanje: rabljeno, Leto izdelave: 2009, Offered here is a used machining centre from the manufacturer Deckel Maho DMG. The machine is under power and can be inspected at our facility. Ex works, loaded on truck Manufacturer: DMG Deckel Maho Model: DMC 125 H duoBlock Year of manufacture: 2009 Control: Siemens 840 D Solutionline (PCU 50) Technical data: Travel X, Y, Z axes: 1250 x 1000 x 1000 mm Feed rate X, Y, Z axes: 20 - 60,000 mm/min Rapid traverse X, Y, Z axes: 60 m/min B-Axis travel: 360 x 0.001° B-Axis feed rate: 10,800°/min Max. table rotation speed: 30 rpm Spindle speed: 20 - 8,000 rpm Gear ranges: 2 Max. workpiece diameter: 1,250 mm Max. workpiece height: 1,580 mm Clamping area: 800 x 800 mm Max. workpiece weight: 1,500 kg Pallet weight: 570 kg Max. permissible weight difference for pallet loading: 1,000 kg Tool holder: SK 50 according to DIN 69871 Maximum tool length: 650 mm Tool magazine: 120 positions Transport dimensions: 6,500 x 3,000 x 3,200 mm Transport weight of the machine (without magazine or other accessories): approx. 20,000 kg Required space: approx. 7,000 x 6,000 mm Total weight of the machine: 24,000 kg Hjdpfx Ajw Ew T Sebheh Accessories: - Chip conveyor with coolant tank - Coolant system - 4x machine pallets - Tool magazine - Oil mist extraction - Various new spare parts: 1x Y-axis length measuring system (new) 1x lubrication unit 230V 0.12 30bar (new) 1x gear unit P-AGG*MKF1-KW2-20036 (new) 1x Cyclo gearbox F1C-A25 (new) 1x retrofit kit power module (new) 1x lifting devices for the machine

Stanje: rabljeno, Technical Details: Maximum balancing weight: 800 kg Balancing body diameter: 1250 mm Balancing speed: 190 - 3600 rpm Bed length: 2600 mm Voltage: 380 V/Hz Drive power: 7.5 kW Machine weight approx.: 1.5 t Hedpfxou Upp To Abhoh Machine dimensions approx. LxWxH: 3.5 x 1.7 x 2.0 m Control cabinet dimensions: W: 650 x D: 250 x H: 800 mm Horizontal Balancing Machine The balancing machine is used for measuring and correcting the static and dynamic imbalance of rotors. Maximum balancing body weight 800 kg with equal load distribution, i.e. 400 kg per bearing stand Power transmission via cardan shaft Bearing journal Ø min./max.: 16-95 / 95-180 mm Distance between bearing centers min. 125 mm and from shaft end to bearing center max. 2070 mm Measurement speed: 1st gear = 190 – 650 rpm 2nd gear = 400 – 1250 rpm 3rd gear = 700 – 2100 rpm 4th gear = 1200 – 3600 rpm 2 mounting pedestals with manual adjustment along the entire bed Schenk measuring device with digital display and various accessories, e.g. multiple rotor shafts with different diameters and various rotor mounts, please inquire for details! i.D.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2015, Complete robotic welding cell with rotary table and enclosure Robot: KUKA KR 150 R2700 extra Payload: 150 kg Reach: 2,090 mm Hjdpfxonr E Ene Abhsh Equipped with welding gun (Dalex, new in 2018) including cooling system (closed-circuit water cooling) A complete second welding gun (manufacturer: ARO) is included in the scope of delivery Dedicated cooling unit integrated in the system Automatic rotary table with 10-position indexing (currently set up as 5-position for ongoing production) Workstation for loading and unloading parts is well-lit and secured with light barriers System control via Siemens PLC, programmed by HS Automation Siemens operator panel for system operation mounted at the loading station on a swivel arm All components enclosed within a safety housing with security door. The installation can still be inspected under power.

Stanje: novo, Cutting diameter round: 900 mm Cutting diameter square: 900 mm Cutting diameter flat: 900x900 mm Saw band length: 9300 x 67 x 1.1 mm Table height: 790 mm Band speed: 14 - 60 m/min Total power requirement: 11 kW Hjdpfjfg E Hpjx Abhjh Machine weight approx.: 8.45 t Dimensions (L x W x H): 4,485 x 1.68 x 3.15 m The semi-automatic, hydraulic saws of the X-tech line offer top-tier sawing technology and maximum performance when cutting specialty steels. - The electro-welded machine frame and the steel saw frame meet all cutting requirements and eliminate vibrations and noise. - The chip conveyor is hydraulically driven and the speed is adjustable. - All machine motions (saw frame, vice, feed, saw band guides) are enabled by modern linear guides with high static and dynamic load capacity, guaranteeing very low sliding friction. - Another key feature is the material positioning rollers, which are powered by a hydraulic motor. These move at a right angle to the material, allowing for optimal clamping. - Thanks to the saw band position height control, the operator can position the band close to the material’s upper edge. After cutting, the band automatically returns to the previous position; alternatively, the 'remain' option in the lower position can be selected. During the cutting cycle, the software compares cutting force with preset values and can stop the sawing system in case of irregularities. - The saw band is cleaned by two adjustable steel brushes, which are hydraulically driven. - The hydraulic unit, including filter and manometer, ensures especially smooth operation at constant pressure. - Precision ground carbide inserts clamp the saw band, complete with lateral, hardened, and adjustable guide rollers. The adjustable band guide automatically moves as close as possible to the material. - The saw band is tensioned by a hydraulic cylinder, controlled by the machine software. Tension is automatically released after a preset time when the machine is idle or after a cycle is completed. - Automatic version with CNC control available for the X-TECH 900 / 1200 models with a feed length of 500 mm for high production series. - The material is supported by a table with seven rollers, powered by a hydraulic orbital motor, allowing precise material positioning even under maximum load. - All guided motions are facilitated by four ball circulation guides with high static and dynamic load capacities; significantly reduced feed friction. Hardened and ground prismatic guides. Price on request.

Stanje: rabljeno, Leto izdelave: 2012, x-hod: 1.035 mm y-hod: 560 mm z-hod: 510 mm CNC upravljalnik: HEIDENHAIN TNC620 Dimenzije mize: 1200 x 560 mm Največja obremenitev mize: 1000 kg Vreteno: SK 40 Število vrtljajev vretena: 10.000 U/min Pogonska moč vretena: 13 kW Neskončno nastavljiv pomik: 20.000 mm/min Hitri pomik: 25 m/min Orodniška izmenjevalna naprava: 20 pozicij Naprav za notranje hlajenje (IKZ): 20 bar Obratovalna napetost: 400 V Hsdpfow A Spvsx Abhjh Skupna priključna moč: 17 kVA Teža stroja: cca 4,1 t Potrebni prostor: cca 2,55 x 2,30 x 2,25 m Transportni trak za odrezke: 3,90 x 0,95 x 1,60 m - Tovarniška št.: 1539000377A - Delovni čas stroja: 21.689 h - Delovni čas vretena: 9.021 h - Krmiljenje: Heidenhain TNC 620 - elektronsko ročno kolo - Transportni trak za odrezke - IKZ 20 bar

Stanje: dober (rabljeno), Leto izdelave: 2004, Clamping knife head type (max.) 460 mm Knife head weight (max.) 150 kg Mounting plate diameter for knife heads (Ø) 360 mm Mounting taper for knife heads nominal diameter Ø 58.227 mm Travel path - z axis 200 mm Chart recording magnification ±10 - ±500 µm Hedpfsul Efmox Abhjh Machine weight approx. 2.3 t Space requirement approx. 2 x 1.5 x 2.03 m In the manufacturing process for spiral bevel gears, the quality of the gear manufacturing tools used plays a decisive role. Especially in dry milling, high gear quality and long tool life can only be achieved through precisely adjusted knife heads. The Oerlikon Knife Head Setting and Testing Device CS 200 enables quick and easy adjustment of individual blades, checks their position, and documents the measurement results. The measurement process on the CNC-controlled testing device is semi-automated: all actions required to perform the process are shown on the display for operator guidance. The positioning of the individual knives in the knife head, as well as setting the height of the knife tips, is largely automatic thanks to a special procedure, and is simultaneously documented via a run-out diagram. A subsequent measuring process checks the radial position of both the internal and external cutting edges of all knives in the knife head. If individual inspection parameters on the knives do not meet the tolerance requirements, these can be adjusted individually. Thanks to the combination of a semi-automated adjustment process, operator-guided setup actions, and automatic measuring processes, knife heads can be set quickly, conveniently, and with high precision. Operator-guided adjustment and inspection process: - Graphical display of the knife head design as well as measurement results with tolerance verification - Instructions for the operator in plain text (no coded information) - Simple allocation of measurement results to individual knives - Documentation of setup and measurement results via printer - Adjustment and inspection process suitable for stick blade heads of types ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® - Interface for neutral data

Stanje: zelo dobro (rabljeno), Type: Jeol JSM-6490 Jeol JSM-6490 Scanning Electron Microscope (PC-SEM) Modern, high-resolution, digital scanning electron microscope featuring newly developed electron optics and an intuitive graphical user interface (GUI) operating on Microsoft Windows XP Professional. Instrument configuration includes the following features: - Magnification range: 5x - 300,000x - Accelerating voltage: 0.3 - 30 kV - Tungsten hairpin cathode (LaB6 cathode optional) - Large fully motorized specimen stage with eccentric tilt, including: - Graphical navigation on the specimen holder - Easy sample navigation via click-center-zoom Hjdpomn Rcqsfx Abhoh - Field-of-view controlled navigation using two navigators - Relative coordinate navigation - Save and recall sample positions - Adjustable specimen stage field-of-view process - Field-of-view correction during rotation via computer-controlled eccentric rotation - Field-of-view correction during tilting via computer-controlled eccentric tilt - Calculation of possible tilt angle based on sample geometry - Automatic focus tracking when moving the sample in the Z-direction - Intelligent limit switches for the motorized axes Specimen stage travel range: - x = 125 mm - y = 100 mm - z = 5 to 80 mm (stepless) - T = -10°C to +90°C - R = 360° (continuous) - Secondary electron detector for high vacuum operation - Innovative superconical objective lens to ensure highest image resolution even at high tilt angles - Guaranteed SE image resolution: 3 nm at 30 kV and 15 nm at 1 kV - Simultaneous live image display from multiple detectors - Easy sample navigation via click-center-zoom - Powerful image measurement functions - Movie function for recording dynamic processes - Versatile sample chamber with various expansion options: free flanges (e.g., for EDX, WDX, EBSD, cathodoluminescence, etc.) - Maintenance- and wear-free, quiet pumping system consisting of forepump, vibration-free high-performance diffusion pump, and electromagnetic valve control - Extensive fault protection to prevent operator error and external media failure - Ergonomic, height-adjustable system table - SEM starter kit including 2 sample holders, tool kit, and 6 spare cathodes Additional equipment for scanning electron microscope: - Turbomolecular pump instead of standard diffusion pump - When using a turbomolecular pump, no cooling water is required for SEM operation. Additional SEM equipment: - PC for SEM control including TFT monitor - ΟΧ200 Bruker Quantax 200 EDX System EXTENDED - Bruker EDX software license will be transferred to the new owner upon purchase! - Nitrogen-free, energy-dispersive X-ray analysis system including: - SDD detector with 127 eV or better energy resolution - Detection of all elements from boron upwards - Vibration-free, maintenance-free, Peltier-cooled (nitrogen-free) - Pulse processor - TFT monitor - Spectrum measurement and element identification - Fully automatic, quantitative, standards-free element analysis - Image acquisition - Ultra-fast qualitative line scan - Ultra-fast qualitative element mapping - Data management and archiving system - Report generation and results output - Data communication - Installation and instruction - HyperMap - Multipoint analysis - Bruker xFlash detector (SDD) with SVE III signal processing unit Scope of delivery: (See photos) Condition: used (Subject to change and errors in the technical data and specifications!)

Stanje: zelo dobro (rabljeno), Hello, We are offering used Erowa PalletSetW vices. All items have been cleaned and tested by us. - ER-025895 Vice PalletSet W 40mm - ER-054922 Flat Vice 8mm PalletSet W - ER-055774 Vice 0-170mm Additionally, a full functionality check was performed. These vices show minor signs of use, but are in very good technical condition. Hedpfxsitcq Ts Abhoh Single unit purchase is also possible. Spare parts are available as well. If you have any questions, please do not hesitate to contact us.