Trosna portalna rezkalka

Bornemann Twist

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 6.000 mm, pomik po osi Z: 1.250 mm, največja hitrost vretena: 12.000 obr/min, model krmilnika: Heidenhain iTNC530 mit Handrad, Stroj s 4. osjo kot zasučno osjo & redno vzdrževanje s strani proizvajalca! TEHNIČNI PODATKI Delovna območja Os X: 3.000 mm Os Y: 6.000 mm Os Z: 1.250 mm Glava za rezkanje, os A: krmiljeno zasučna Rezkalno vreteno Moč vretena: 4,4 kW Hitrost vretena: 12.000 min⁻¹ Vpenjanje orodja: 78/8 prirobnica Menjava orodja: ročna z navojno matico Pogoni linearnih osi Premična hitrost osi X, Y, Z: do 20 m/min Pospešek osi X, Y, Z: do 1,5 m/s² PODROBNOSTI O STROJU Krmiljenje: Heidenhain iTNC530 z ročnim kolesom Priključna moč: cca 25 kW Predvarovalka: 42 A Dimenzije & teža Potrebni prostor stroja: cca 5.500 x 9.000 x 4.500 mm Skupna teža: 9.600 kg Lhjdpfxoxvx U Ae Ahzjp OPREMA Možnost predelave na visoko frekvenčno vreteno Pomembno: Miza in na fotografijah prikazana lesena plošča nista vključeni v obseg dobave.

Stanje: rabljeno, Leto izdelave: 2016, x-travel 6,500 mm y-travel 4,250 mm z-travel 1,500 mm Control unit: HEIDENHAIN iTNC 530 HSCI Table size: 7,500 x 3,000 x 300 mm Distance between columns: 3,800 mm Rapid traverse x/y/z: 30,000 mm/min Tool holder: HSK 100 Spindle speed: 6,000 rpm Gear stages: 2 Motor power: 37 kW Operating hours: 28,475 h Spindle hours: 12,629 h Tool changer: 60 positions Internal coolant supply: 36 bar Chip conveyor: dual Milling head: 5-axis milling head OAD Total power requirement: 80 kVA Machine weight: approx. 85 t OAD milling head fully water-cooled. - 6,000 rpm without time limitation. - Patented rotation system by Correa with stationary double-toothing enables rotation every 0.02º. As it does not involve a freely moving toothing, maximum rigidity and precision are ensured. - Allows negative angles up to 45 degrees. Lhedpjxb Ed Ujfx Ahzjp - Milling spindle model FCT (4,000 rpm / 1,893 Nm / HSK 100) - Head extension model AL600 (1,500 rpm / 1,298 Nm / ISO 50) - Head changer station for 3 heads - M&H 20.41

Stanje: rabljeno, Leto izdelave: 2007, x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm Control: Sinumerik 840 D Siemens Max. clearance between columns: 3,000 mm Max. passage height: 1,950 mm Max. distance spindle center to table: 1,800 mm Distance spindle nose to table: 1,350 / 1,500 mm Type P 8005020/00-4 Speed range - main spindle: max. 18,000 rpm Drive power - main spindle: 20 kW Max. torque: 48 Nm Tool holder: HSK-A63 DIN 69063 Spindle extension: 450 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Type P 8002320/00-4 Speed range - main spindle: 20 - 5,000 rpm Drive power - main spindle: 40 kW Max. torque: 1,100 Nm Tool holder: HSK-A100 DIN 69063 Spindle extension: 300 mm Tilting axis B: +110° / -10° Rotary axis C: +/- 200° Table clamping area: 4,000 x 2,200 mm (2x) Max. table load: 12 / 20 t Height above floor: 700 mm Number of T-slots: 11 + 19 T-slot width: 28H7 mm T-slot spacing: 200 mm Number of tool pockets: 327 positions Number of tool pockets HSK A63: 156 positions Number of tool pockets HSK A100: 171 positions Max. tool diameter HSK A63: 52 mm Max. tool length HSK A63: 250 / 500 mm Max. tool weight HSK A63: 5.0 kg Max. tool diameter HSK A100: 315 mm Max. tool length HSK A100: 500 / 800 mm Max. tool weight HSK A100: 40.0 kg Feed rate X: max. 30,000 mm/min Feed rate Y/Z: max. 40,000 mm/min Feed rate B: 3,600 °/min Feed rate C: 2,160 °/min Acceleration X: max. 1.5 m/s² Acceleration Y/Z: max. 3.2 m/s² x-axis 10,100 mm (2x 5,000 mm) y-axis 3,000 mm z-axis 1,500 mm b-axis +110° / -10° c-axis +/- 200° Total power requirement: 150 kVA Required space approx. 25.0 x 12.0 x 7.0 m 5-axis portal large machining center DROOP + REIN - TFS 22 40 DT D40 P - Two milling heads - Approx. 4,000 operating hours - X-axis 10,000 mm (coupled) / 2x 5,000 mm (single table) - 3 simultaneous axes (X, Y, Z) - 2 positioning axes (B, C) Lhodpfx Ajvy Ihdohzop - Tools upon agreement

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, Heyligenstaedt Heynumill 2700-PF 3/5-axis CNC gantry milling machine with integrated C-axis and interchangeable milling heads. Ljdpowthz Aefx Ahzjhp Control: Heidenhain TNC 430 X-axis: 3,000 mm Y-axis: 4,000 mm Z-axis: 1,500 mm In 2018, the Heynumill underwent a comprehensive overhaul: the entire hydraulic system was replaced, all electrical cables were renewed, the spindle cooling unit and both longitudinal conveyors were replaced, and the milling heads were completely refurbished. The total cost of refurbishment amounted to €160,000. In 2020, the milling gearbox was replaced. For further technical data, please refer to the attached PDF file.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2013, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 24.000 mm, pomik osi Y: 4.720 mm, pomik po osi Z: 1.500 mm, dolžina mize: 24.000 mm, širina mize: 3.700 mm, največja hitrost vrtenja: 3.000 obr/min,