Hladilni kompresor

BITZER HSN7471-75-40P

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, skupna dolžina: 2.750 mm, skupna širina: 2.800 mm, skupna višina: 1.830 mm, zahteva za prostor dolžina: 2.800 mm, potrebna širina: 2.850 mm, potrebna višina: 1.900 mm, proizvajalec motorjev: Bitzer, volumenski pretok: 940 m³/h, Two used Bitzer screw compressor skids for low-temperature applications on Freon. Both skids are supplied with a shared control panel. Originally, each skid had its own cold store, but the capacities listed in the specifications are combined. Skid 1 is equipped with two Bitzer HSN 7461-70-40P semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a brazed plate heat exchanger for heat recovery, as well as pressure and safety switches. This skid has a displacement of 440 m³/h at 50 Hz and 532 m³/h at 60 Hz. Skid 2 comes with two Bitzer HSN 7471-75 semi-hermetic screw compressors, a Bitzer FS 3102 liquid receiver, a Bitzer OA4088 oil separator, a brazed plate heat exchanger as economizer, a WTT GmbH WP 7M-44 brazed plate heat exchanger for heat recovery, as well as pressure and safety switches. This skid has a displacement of 500 m³/h at 50 Hz and 600 m³/h at 60 Hz. Bitzer HSN 7461-70-40P (x2) capacities: -20ºC/+40ºC: 229.6 kW -30ºC/+40ºC: 157.4 kW -40ºC/+40ºC: 102.0 kW -45ºC/+40ºC: 79.8 kW Bitzer HSN 7471-75 (x2) capacities: -20ºC/+40ºC: 240.6 kW -30ºC/+40ºC: 165.8 kW -40ºC/+40ºC: 109.0 kW -45ºC/+40ºC: 86.0 kW Gkodpfx Abox Ap Hpe Tjf

Stanje: zelo dobro (rabljeno), - Type: 4VHC-10K-40P (x4) - Flow rate: 28.9 m³/h (x4) - Refrigerant: CO2 - Control cabinet and refrigerant tank included in the set - Cooling capacity for CO2: 328 kW at -25°C/40°C, 267 kW at -30°C/40°C - Set dimensions: 3400 x 1600 x 2200 mm - Control cabinet dimensions: 2520 x 500 x 2270 mm Gksdpfxsvb T R He Ab Tsf - Stock status: 1 unit available - Stock number: Z95 - Condition: Used, very good

Stanje: pripravljen za uporabo (rabljen), Bitzer Compressor Unit Type: HSK7471-90-40P (x3) Flow rate: 250 m³/h (x3) Cooling capacity for R404A: 531 kW at -5°C/40°C, 435 kW at -10°C/40°C, 280 kW at -20°C/40°C Unit dimensions: 4500 x 1200 x 2300 mm Thermofin Condenser Type: X-TCH 100.1-26-B-N(D5) Cooling capacity: 1103 / 997 kW Air flow: 354,000 / 281,000 m³/h Number of fans: 12 x 1000 mm Unit dimensions: 11,800 x 2300 x 1600 mm Volume: 276 L Weight: 2,400 kg Control Cabinet Gkjdpfx Abopgy Ixo Tsf Dimensions: 2400 x 600 x 2000 mm We offer a wide range of other refrigeration equipment, including condensing units, compressors, coolers, condensers, chillers, cold rooms, refrigeration and catering furniture, as well as machines and devices for restaurants and meat processing. Check out our other listings or call us— not everything is listed on Machineseeker.

Stanje: pripravljen za uporabo (rabljen), Bitzer Compressor Unit Type: HSK7461-80-40P (x3) Flow rate: 220 m³/h (each) Refrigeration capacity with R404A: 560 kW at -5°C/40°C, 477 kW at -10°C/40°C, 338 kW at -20°C/40°C Gsdpjpgzhusfx Ab Tjkf Unit dimensions: 4500 x 1200 x 2300 mm Thermofin Condenser Type: X-TCH 100.1-25-B-N(D5/S5) Cooling capacity: 963/852 kW Airflow: 295,000 / 234,000 m³/h Number of fans: 10 x 1000 mm Unit dimensions: 9800 x 2300 x 1600 mm Volume: 229.3 L Weight: 1,929 kg Control Cabinet Dimensions: 2400 x 600 x 2000 mm We offer many other refrigeration units. Refrigeration aggregates, compressors, evaporators, condensers, chillers, cold rooms, refrigeration and catering furniture, as well as machines and equipment for restaurants and meat processing. See our other listings or call us — not all items are listed on Machineseeker.

Stanje: rabljeno, Zamrzovalni tunel Scanio -Leto proizvodnje: 2017 -Zamrzovalna zmogljivost: 50 kW -Zunanje mere: 4100 x 3250 x 3200 mm Gkjdpfx Abexfivco Tjf -Širina traku: 2 x 600 mm -Dolžina traku: 4100 mm -Možnost ločenega upravljanja trakova -Hladilno sredstvo: R449A-freon -Maks. višina izdelka: 150 mm -Stanje: Rabljeno, zelo dobro, pripravljeno za delo -Na voljo tehnična dokumentacija Kompresorska enota Bitzer -Tip: S6F-30.2Y-40P (x4) -Pretok: 101,4 m3/h (x4) -Hladilna zmogljivost za R404A: 165,6 kW pri -25°C/40°C, 142,8 kW pri -30°C/40°C, 101,2 kW pri -40°C/40°C -Mere: 3150 x 1170 x 1920 mm -Stanje: Rabljeno, zelo dobro, pripravljeno za delo Kondenzator LUVE -Tip: LMC6F 3542 V/H EC -Hladilna zmogljivost: 247,2 kW -Število ventilatorjev: 4 x 630 mm -Mere: 5400 x 1110 x 1250 mm -Stanje: Rabljeno, zelo dobro, ventilatorji po testiranju, pod dušikovim tlakom

Stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, proizvajalec motorjev: VEM, moč: 110 kW (149,56 KM), volumenski pretok: 679 m³/h, Rabljeni amonijačni kompresor Sabroe TSMC - 116 S. Hlajenje z vodo, dobro vzdrževan, v delujočem stanju, zamenjan zaradi namestitve novega kompresorja Sabroe. Hladilna zmogljivost približno 100 kW (-20°C). Upravljan s krmilnikom Carell, ki ga je mogoče vključiti po želji. Gsdpeuq Hnyjfx Ab Tokf Motor 110 kW. Nekateri originalni deli bodo prav tako priloženi. Kompresor je bil uporabljen pri proizvodnji maščobe/margarine. Običajno je deloval pri sesalnem tlaku 0,1–0,2 BAR, kar je pomenilo temperaturo izhlapevanja (T₀) -25°C in temperaturo kondenzacije (Tₖ) +35°C, z zmogljivostjo kompresorja okoli 100 kW. Kompresor lahko deluje tudi pri nižjem sesalnem tlaku za doseganje nižjih temperatur, na primer med -30°C in -35°C.

Stanje: dober (rabljeno), Copeland Multi Compressor Refrigeration Units Deep Freeze / Normal Cooling - 4x Copeland D6DT5-320X-AWM/D compressors Gjdpjg N Hu Sefx Ab Tskf - Cooling capacity: 220 kW at -10ºC/+40ºC, 56 kW at -35ºC/+40ºC - Displacement: 4 x 126.9 m³/h - With original Güntner GVH 067B/2x3N condensers - Quantity in stock: 1 unit - Refrigerant: R404A - In very good condition We have many other refrigeration systems: Bitzer, Copeland, Frascold, Lunite, Küba, Güntner, ECO, Alfa-Laval, Goedhart, Helpman We also offer a wide range of other refrigeration equipment: chillers, compressors, coolers, condensers, cold rooms, refrigeration and catering furniture, as well as machines and equipment for gastronomy and meat processing. View our other listings or contact us directly— not all items are listed on Machineseeker.

Leto izdelave: 1998, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, SERAP CRUST FLOW P ID št. 2797 Tunel Serap Crust Flow P omogoča popolno zmrzovanje skorje občutljivih in mehkih živil, kot so ekstrudirani piškoti, testenine, pene, pripravljene jedi, sladoled ipd. Primeren je tudi za zamrzovanje mesnih izdelkov pred rezanjem. Dimenzije: 320 x 120 cm, višina 165 cm, širina transportnega traku 40 cm. Gkodpeumbyisfx Ab Tsf

Leto izdelave: 2004, Stanje: zelo dobro (rabljeno), Originally designed for meat pieces with vegetable mixtures. Subsequently, sauce or broth was also dosed into the pouch. This piston filler can be purchased as an accessory. Gkjdpfx Aboklz E Es Tjf The system is available as it currently stands (only partially operational). These machines were previously integrated into a complete line. The control systems for the other machines are also housed in this control cabinet. To operate the scale and the form-fill-seal machine as stand-alone units again, modifications to the control system and components in the control cabinet will be required. Of course, we can carry out these works for you. Programming can be tailored to your product and plant requirements. Therefore, we recommend clarifying in advance: - Which products, in which packaging (film type), at what output, and within what budget? Only then can we prepare an appropriate offer for you. We are machinery dealers and have a large selection of machines distributed across our two locations in Germany and Austria. Please contact us if you are looking for other machines for the food industry as well.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, El túnel de congelación FRIGOSCANDIA FF-2-RMA IQF (Congelación Individual Rápida) es un sistema de congelación continua diseñado para productos alimentarios que requieren una congelación rápida individualizada, tales como mariscos, frutas, hortalizas, carnes en lonchas o productos precocinados. Su diseño lineal con flujo de aire forzado garantiza un enfriamiento homogéneo, evitando la formación de bloques y conservando la calidad del producto. Gedpfxewn Hd Se Ab Tokf Aplicaciones: Industria pesquera: gambas, langostinos, filetes de pescado, moluscos. Industria de frutas y hortalizas: frutas enteras o troceadas, verduras, legumbres. Carne y preparados cárnicos: albóndigas, tiras de pollo, hamburguesas vegetales. Productos precocinados: pasta, arroz, mezclas listas para cocinar. La producción depende del producto; por ejemplo, en el caso de los guisantes, el rendimiento es de: 850 kg/h. Temperatura de entrada: +15ºC Temperatura de salida: -18ºC La producción puede variar en función del producto.