Kotel

Bioláng

Stanje: pripravljen za uporabo (rabljen), An air-conditioned office and commercial container by Aztech is available. U-value: approx. 0.38W–0.46W/m²K, floor load capacity: approx. 100kg/m², internal height: approx. 2,500mm, external dimensions (L/W/H): approx. 3,000mm/3,000mm/2,600mm, weight: approx. 800kg. Documentation available. On-site inspection possible. Gbjdpow D Eubofx Afqjg

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Viessmann Paromat-Triplex Output: 225 kW Installed in a container. Inspection only by prior telephone arrangement! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee; subject to errors and prior sale. The seller accepts no liability for typing or data transmission errors. Naturally, we can also handle all formalities. Gjdpet Iuyfjfx Afqebg Loading possible.

Leto izdelave: 1997, Stanje: generalkompletno obnovljen (rabljeno), 2 units of spiral casing pumps in process design 1 unit completely overhauled: pump and motor bearings replaced with new ones. Mechanical seal refurbished by a specialist company. All seals replaced with new ones. Flow rate: 6 m³/h Delivery head: 25 m Pump speed: 1440 rpm Shaft seal: double-acting mechanical seal Manufacturer: Burgmann HRZ 13754-00 SIC/SIC/-CAR/SIC-VITON Impeller type: closed two-channel impeller Impeller diameter: 277 mm Bearing type: rolling bearings Impeller side: 1x NU411 Drive side: 2x 7311 Lubrication type (drive side): oil Lubricant monitoring: oil level regulator Materials: Pump casing: Duplex steel Noridur 1.4593 (9.4460) Wear plate: Duplex steel Noridur 1.4593 (9.4460) Discharge cover: Duplex steel Noridur 1.4593 (9.4460) Shaft: tempered steel C45+N Impeller: Duplex steel Noridur 1.4593 (9.4460) Bearing bracket lantern: grey cast iron EN-GJL-250 Shaft sleeve: Duplex steel 1.4462 Suction port nominal diameter: DN 80 Discharge port nominal diameter: DN 40 Nominal pressure suction: PN 10 Nominal pressure discharge: PN 10 Coupling manufacturer: Flender Gsdpfx Afoiuznujqsbg Coupling type: Eupex NH with spacer sleeve Baseplate: grey cast iron Motor manufacturer: AEG AM 132 Efficiency class: IE 0 Motor speed: 1476 rpm Frequency: 50 Hz Rated voltage: 400 V Motor rated power: P2 7.50 kW Insulation class: F Motor protection class: IP55 Cosphi: 0.82 Dimensions: Length: 1270 mm Width: 550 mm Height: 570 mm Weight: 300 kg Material 1.4593 Noridur is highly suitable for: - Chemical and process industries - Sulphuric and phosphoric acid - Salt production and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal extraction and conveying - Flue gas desulphurisation plants - Acidic, chloride-containing washing suspensions - Acidic process waters - Wastewater treatment/sewage plants - Offshore and marine engineering

Stanje: zelo dobro (rabljeno), Buderus Logano SK735 - 830 kW, 6 bar Betriebsdruck, auch mit 1200 und 1400 kW erhältlich Gsdpfx Aohtf Dksfqjbg

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, dolžina pomika po osi Y: 6.000 mm, Tipper bed for logs up to 6 m long. Gbjdpfsr Iig Dox Afqog Available from September 2024.

Stanje: novo, Round material 30 x 1 mm Square material 30 x 30 x 1 mm Solid round material 16 mm Solid square material 30 x 10 mm Rotational speed 9 rpm Total power requirement 1.1 kW Machine weight approx. 0.32 t Gbodsh D Svnopfx Afqog Space requirement approx. 0.82 x 0.60 x 1.26 m Electric profile bending machine with - 5 sets of rollers 2x for round material 20 mm and 30 mm, 1x for flat material 1x for square material 1x for ? - Foot switch with emergency stop

Stanje: novo, *TECHNICAL SPECIFICATION: Heating capacity: up to 36 kW per consumer circuit Cooling capacity: up to 30 kW per consumer circuit at -30°C Consumer circuits: 1 or 2 as standard Temperature range: -45°C to +130°C Medium: Water/glycol mixture Dimensions LxWxH (without connections): 1-circuit: 1950 x 1280 x 1725 mm 2-circuit: 2150 x 1640 x 1725 mm Weight: 1-circuit: approx. 1300 kg 2-circuit: approx. 1500 kg *EQUIPMENT HIGHLIGHTS: - Control: temperature control (standard) - Controlled via PLC with touchscreen - Analog and digital interfaces - Internal 2-circuit pump system (INFO: Ensures performance values even at low flow rates) - Heating control via solid-state relay (SSR) - Flow measurement in the internal circuit for flow monitoring (INFO: In case of incorrect water/glycol mixture, the system automatically issues a warning and then shuts down) - Pressure-controlled cooling water regulator (INFO: Significantly more accurate than temperature control) - Stainless steel tank, corrosion-resistant components (stainless steel/non-ferrous metals) (optional: non-ferrous metal-free) - All medium-carrying components and pipelines insulated for low-temperature applications - Water-cooled condenser (air-cooled on request) Gbsdpfx Aeg Ezarofqsg *OPTIONS: - Volume flow control: up to 100 l/min, >4 l/min +/- 5% of reading - Pressure control: 0.5 to 4.5 bar (control range) - Compressed air monitoring - Test piece draining via compressed air - Cooling water monitoring - Supply pressure limitation - Additional special options available upon request and subject to technical review Visit our website for more details or for other performance classes. *This device complies with European directives. Other directives and standards are only fulfilled if stated in the order confirmation. This technical specification reflects the standard equipment; customer requirements deviating from the standard are specified in offers or order confirmations.

Stanje: zelo dobro (rabljeno), Four-side planer Weinig Maximum planing width: 230 mm Maximum planing height: 120 mm 5 heads: bottom - 5.5 kW; left and right - 11 kW each; top - 11 kW; bottom - 5.5 kW Feed motor - 4 kW Fully adjustable heads Electrically adjustable height and width of planing Spindles: 40 mm Feed on cardan shafts, with stepless adjustment Solid planer from WEINIG Gsdpfx Aerigxyefqsbg Total machine length: 415 cm Machine tested, in original condition

Stanje: rabljeno, Hydraulic power unit, hydraulic pump, universal power pack - Manufacturer: H+L, hydraulic power unit for hydraulic punch - Type: DK52 1-6-250P-391K - Motor: Junginger 5.5 kW / 1455 rpm - Pressure gauge: up to 250 bar - Accumulator: Hydac 2.5 liters - Hydraulic tank / filter / valves: see images Gedpfxof Tdt Ij Afqebg - Dimensions: 540/630/H1210 mm - Weight: 198 kg

Stanje: novo,