Inkubator Binder BF115 UL

Binder BF115 UL

Leto izdelave: 1996, stanje: rabljeno, Incubator cabinet with control up to approx. 80°C, with internal dimensions of approx. 400 x 500 x 350 mm. Hnedpfx Ajbylq Hedkoi

Stanje: zelo dobro (rabljeno), Heraeus Incubator Brutschrank We are offering an incubator for sale. Capacity: 30 liters Manufacturer: Heraeus External dimensions: Height 552 mm x Width 552 mm x Depth 610 mm Internal dimensions: Height 231 mm x Width 352 mm x Depth 370 mm Nominal temperature: 50 °C Connection: 220V 50/60 Hz 1.00 A 0.22 kW Weight: approx. 41 kg Type: B 6030 Condition: used Scope of delivery: (see picture) (Technical specifications subject to change and errors reserved!) Hsdpfx Adsg Aiq Nekoni For further questions, please feel free to contact us by phone.

Stanje: zelo dobro (rabljeno), Here we are offering a Weiss climate test chamber. Weiss Climate Test Chamber, water-cooled (Refrigerant converted to R-452A) Temperature Testing Hnedpsq U Sdcefx Adksi Volume: 335 liters Test chamber dimensions: Internal dimensions: Height 750 mm, Width 580 mm, Depth 765 mm External dimensions: Height 1775 mm, Width 870 mm, Depth 1600 mm Minimum temperature: –42°C Maximum temperature: +180°C Temperature change rate, cooling: 4 K/min Temperature change rate, heating: 3.2 K/min Temporal temperature deviation: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Climatic testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temporal temperature deviation: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1 K Temporal humidity deviation: ± 1 to ± 3 % r.h. Voltage: 3/N/PE AC 400V±10% 50Hz Rated power: 4.1 kW Rated current: 14 A Refrigerant: R-452A Model: WK3-340/40 Weight: approx. 515 kg For your safety as a buyer, please note the following information! The following measures are carried out in advance on our offered chambers: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful testing, the chambers undergo a documented test run. Condition: used Scope of delivery: (See picture) (Specifications and technical data may be subject to change and errors!) For further questions, feel free to contact us by phone.

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), Funkcionalnost: popolnoma funkcionalen, Imamo tri enote na zalogi, cena velja za eno enoto. V dobrem delovnem stanju. Prosimo, oglejte si tudi naše ostale ponudbe. Hnodpfx Adswkwn Tjkji

Stanje: zelo dobro (rabljeno), Vötsch Climate Test Chamber We offer a Vötsch climate test chamber for sale. Model: VC³ 4100, air-cooled With temperature change rate of 3 K/min Test chamber dimensions: height 950 mm x width 1100 mm x depth 950 mm Overall dimensions: height 2000 mm x width 1300 mm x depth 1916 mm Volume: 990 liters Port openings: Ø 125 mm, Ø 50 mm Specifications for temperature testing: Temperature range: -42°C to +180°C Hnjdpfxjyguw No Adkoi Temperature deviation over time: ± 0.1 to ± 0.5 K Spatial temperature uniformity: ± 0.5 to ± 1.5 K Temperature change rate: Heating: 4.0 K/min Cooling: 3.0 K/min Max. heat compensation at +20°C: 4,500 W Specifications for climate testing: Temperature range: +10°C to +95°C Dew point range: -3°C to +94°C Humidity range: 10 to 98% r.h. Temperature deviation over time: ± 0.1 to ± 0.3 K Spatial temperature uniformity: ± 0.5 to ± 1.0 K Humidity deviation over time: ± 1 to ± 3% r.h. Max. heat compensation: 500 W Voltage: 3/N/PE AC 400V ± 10% 50Hz Rated power: 11.5 kW Rated current: 22.0 A Refrigerant: R-404 A Weight: approx. 840 kg Type: VC³ 4100 For your security as a buyer, please note the following information! The following points are carried out on all chambers we offer prior to delivery: 1. Functional check and replacement of necessary components 2. If required, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see picture) (Specifications and technical data may be subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Leto izdelave: 2015, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Good day, We are pleased to offer you, without obligation, a used forced-air drying oven / drying cabinet manufactured by Binder, model FD 53. Manufacturer: BINDER GmbH, Germany Model: FD 53 Article number: 9010-0082 Year of manufacture: 2015 Temperature range: +5°C above ambient temperature up to 300°C Heating time to 70°C: approx. 7 min Heating time to 150°C: approx. 24 min Heating time to 300°C: approx. 60 min Spatial temperature deviation at 150°C: approx. 6.7 +/- K Internal volume: 53 L Internal dimensions: 400 x 400 x 340 mm (W x H x D) External dimensions: 640 x 660 x 630 mm Maximum number of shelves: 5 pcs Usable area per shelf: 385 x 300 mm (W x D) Maximum load per shelf: 15 kg Permitted total load: 40 kg Weight (empty): 44 kg Electrical supply: 230V, 50/60 Hz Power consumption: approx. 5.3 A Rated power: 1.2 kW Energy consumption at 70°C: approx. 172 W Energy consumption at 150°C: approx. 429 W Energy consumption at 300°C: approx. 951 W Temperature controller: Microprocessor PID controlled Safety class: 2 (DIN 12880) Controller function (timer): 0-99 hours Areas of application: These units are suitable for the precise temperature control of non-hazardous materials, as well as for drying and heat treatment of solid or powdered stock and bulk materials by means of heat supply. The units can also be used for drying, e.g. laboratory glassware, as well as for warm storage of liquids in containers. Note: Hedpfx Asypv Ihjdkoni The forced-air drying oven / drying cabinet is in good condition, fully operational, and can be tested under power at our workshop. Note: The above technical data were taken from the operating manual, manufacturer’s brochures or other sources, for the accuracy and completeness of which we cannot accept any liability. Scope of delivery: 1 piece of forced-air drying oven / drying cabinet, manufacturer BINDER GmbH, model FD 53 We would be delighted if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Stanje: zelo dobro (rabljeno), Vötsch Model: VC³ 0100 Vötsch Climate Test Chamber, Air-Cooled Hnjdpfx Adjygut Rskoi Test chamber internal dimensions: Height 950 mm x Width 1100 mm x Depth 950 mm Device external dimensions: Height 2000 mm x Width 1300 mm x Depth 1916 mm Test chamber volume: 990 liters Temperature tests: Minimum temperature: -0°C Maximum temperature: +90°C Temperature change rate, cooling: 0.2 K/min Temperature change rate, heating: 0.5 K/min Temporal temperature deviation: ±0.1 to ±0.5 K Spatial temperature uniformity: ±0.5 to ±1.0 K Heat compensation at +20°C: 350W Climatic tests: Minimum temperature: +10°C Maximum temperature: +90°C Dew point temperature range: +4°C to +89.5°C Humidity range: 10 to 98% r.H. Temporal humidity deviation: ±1 to ±3% r.H. Temporal temperature deviation: ±0.1 to ±0.3K Spatial temperature uniformity: ±0.5 to ±1.0K Voltage: 1/N/PE AC 230V±10% 50Hz Nominal power: 2.3 kW Rated current: 10 A Refrigerant: R-404A Weight: approx. 1400 kg Important information for your security as a buyer! For all chambers we offer, the following steps are carried out in advance: 1. Functional inspection and replacement of necessary components 2. If necessary, refilling with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, the chambers undergo a documented test run. Condition: used Scope of delivery: (see photo) (Subject to changes and errors in technical data and specifications!) We are happy to answer any further questions by phone.

Stanje: rabljeno, Ta ponudba je za inkubator Binder BF115. Naprava je popolnoma delujoča in pripravljena za takojšnjo uporabo. BINDER BF 115 – e-serija inkubator s prisilno konvekcijo Inkubator BINDER BF 115 iz e-serije je zasnovan za natančne in nežne inkubacijske procese v laboratorijih, kjer so ključni zmogljivost, enakomernost in zanesljivost. Zmogljiv tudi pri polni obremenitvi in velikih serijah. Ta inkubator omogoča izjemno homogeno porazdelitev temperature in hitro povrnitev na nastavljeno vrednost. Glavne zmogljivostne značilnosti Temperaturno območje: okolica +8 °C do 100 °C – idealno za široko paleto mikrobioloških, bakterioloških in stabilnostnih testiranj. Odlična enakomernost in stabilnost: ±0,3 K enakomernosti pri 37 °C ±0,1 K nihanja pri 37 °C ±1,6 K enakomernosti pri 100 °C Hnodpfexhfz Tex Adksi Hitro segrevanje in regeneracija: Segreje na 37 °C v približno 8 minutah Regeneracija po 30 sekundah odprtih vrat v približno 3 minutah Dizajn in upravljanje e™ Tehnologija: zagotavlja enakomerno temperaturo skozi vse police, tudi pri polni zasedenosti komore. Prisilno kroženje zraka: omogoča učinkovit prenos toplote in konsistentne pogoje v celotni komori. Dezinfekcijski cikel: vgrajen sterilizacijski program pri 100 °C za notranjo dekontaminacijo. Uporabniški vmesnik: intuitiven LCD krmilnik s programirljivim časovnikom, USB priključkom za shranjevanje podatkov in elektromehanskim izpušnim loputam. Varnostni termostat: varnostni razred 3.1 (v skladu z DIN 12880) z vizualnim alarmom za zaščito pred pregrevanjem. Notranji pregled: notranja steklena vrata omogočajo opazovanje vzorcev brez motenja pogojev v komori. Tehnične specifikacije Lastnosti Volumen komore: 114 litrov Temperaturno območje: okolica +8 °C do 100 °C Notranje dimenzije: 550 × 550 × 380 mm (Š×V×G) Zunanje dimenzije: 710 × 725 × 605 mm (Š×V×G) Napajanje: 230 V, 0,4 kW, 6,3 A (na voljo tudi 120 V model) Raven hrupa: 43 dB(A) tipično Teža: cca 54 kg Police: 2 kromirani polici (možnost do 5) Poraba energije: cca 60 Wh/h pri 37 °C; cca 235 Wh/h pri 100 °C Uporaba in prednosti Primeri uporabe: primeren za mikrobiologijo, bakteriologijo, tkivne kulture, stabilnostne teste in farmacevtsko inkubacijo. Prilagodljiva zmogljivost: optimiziran za polno obremenitev in velike serijske količine brez kompromisov pri zmogljivosti. Uporabnikom prijazen: možnost vertikalne zložitve, ergonomsko oblikovan ročaj, enostavno čistljiva notranjost iz nerjavečega jekla brez stalnih pritrdil. Izjemna zanesljivost: hitra regeneracija in natančna regulacija temperature omogočata ponovljive rezultate, tudi ob pogostem odpiranju vrat.