Samodejni stroj za luknjanje in upogibanje

BIHLER MACH 05

Stanje: novo, Leto izdelave: 2026, številka stroja/vozila: 2103 XXXXXX, The FPS 300M, successor to the DECKEL FP1. Based on our many years of service experience, we decided to develop and manufacture our own milling machines. The FPS 300M is a conventional milling machine, perfectly suited for both training and production. Control 3 axes – FPS Aktiv – digital display Spindle speed 40 – 2000 rpm, geometrically stepped direct-drive gearbox with 16 gear stages for maximum torque and milling performance Tjdpfx Aish I Nqweqoc Feed 5 to 500 mm/min, continuously adjustable Rapid traverse 1.5 m/min Quill Extendable quill, vertical 60 mm SK40 with M16 drawbar thread, optional: with DECKEL saw thread S20 x 2 Axes X/Y/Z 300/160/340 mm Table Rigid angle table 600 x 210 mm Equipment • Vertical and horizontal spindle • Milling head manually tiltable +/- 90° Options • Z-axis bellows • Chip tray • Machine lamp • Central lubrication • Universal table • Rotary table • Slotting head • Dividing attachment • Counter-support • etc. Further technical data can be found in the attached data sheet.

Stanje: dober (rabljeno), Leto izdelave: 1982, Funkcionalnost: popolnoma funkcionalen, Equipment: - 1 right-side feed with grippers - 1 two-point eccentric press, 90 kN - 3 standard slide units - 1 narrow slide unit - 1 control shaft Working range: Tjdpfx Aistqf Iqeqoc - Wire diameter range: 0.5 – 4.0 mm - Strip width: up to 60 mm - Feed length: up to 270 mm - Capacity: up to 350 cycles/min

Stanje: zelo dobro (rabljeno), Leto izdelave: 1988, Pressure: 125 tons Lateral frame passages: yes Installation height: 380 mm Table surface: 1100 x 700 mm Ram surface: 700 x 350 mm Stroke: 01-120 mm Tsdpfodvb Tfsx Aiqoc Max. strokes per minute: approx. 70 Power requirement: 22 kW Weight: 8,500 kg Height: 2,900 mm

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 1998, obratovalne ure: 20.800 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, Stroj je trenutno v pregledu v naših prostorih v Semsalesu, Švica. Vpenjalna glava Erowa ITS50. Rotacijski menjalec orodij s 16 pozicijami, dvojna prijemalka. Ploski LCD zaslon. Izvlečna delovna kad. Ogled možen na zahtevo. Več podrobnosti na zahtevo. Tjdpfx Asxlhudjiqjc

Stanje: dober (rabljeno), stiskalna sila: 50 t, hod: 320 mm, Capacity: 50 tons Throat Depth: 225 mm Stroke Rate: 320 strokes/min Table Size: 500 x 800 mm Machine Dimensions (LxWxH): 160 x 120 x 260 cm Todpfx Astt A T Toiqjc Machine Weight: 6 tons

Stanje: zelo dobro (rabljeno), Leto izdelave: 1978, Load capacity: max. 700 kg Reel diameter: 1,000 mm Coil outer diameter: max. 900 mm Coil inner diameter: 240 - 560 mm Coil width: max. 120 mm Todpfx Aiei Hi Swsqjc

Stanje: novo, Leto izdelave: 2025, * 60 l zmogljivost * 2,2 kW visoko zmogljiv trifazni pogonski motor * Nastavljiv nadzor hitrosti do 200 vrt/min * Krmilna plošča in dozirna črpalka vključeni - Dozirna črpalka samodejno dozira kemikalijo v posodo * Časovnik delovnih ur * PU ali INOX plošča * Zamenljiv ventil za izpust odpadne vode Tjdjh Nnbcepfx Aiqsc * Notranja posoda ima kanale in reže, ki preprečujejo lepljenje na stene.

Leto izdelave: 1990, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, suitable for BIHLER GRM 80, BIHLER GRM 100, and BIHLER MACH 05, tested. Todpfed H T Tcsx Aiqec

Stanje: dober (rabljeno), Leto izdelave: 1985, Drive motor: 400 V, 0.55 kW, 2800 rpm Thread diameter range: M 1 - M 6 Spindle stroke: max. 15 mm Output: max. 120 cycles/min Tedpfx Aisdzud Deqoc

Stanje: delavnici obnovljeno (rabljeno), dolžina podajanja os X: 300 mm, dolžina pomika po osi Y: 160 mm, dolžina podajanja os Z: 340 mm, Updated Machineseeker Description (with Axis Travel) Deckel FP1 Aktiv – 3 Axes – Partially Refurbished – Immediately Operational Offered is a Deckel FP1 Aktiv in technically inspected, partially refurbished condition. The machine has been professionally reconditioned and is in a dependable, ready-to-use state. Ideally suited for workshops, toolmaking, training environments, as well as prototype and small-batch production. This is not an unchecked used machine, but a technically overhauled toolroom milling machine with a clearly defined scope of delivery and reliable lead time. Technical Data and Features Tsdpfx Aiex Tdy Isqec Travel distances: X-axis approx. 300 mm Y-axis approx. 160 mm Z-axis approx. 340 mm 3 axes with Aktiv control and digital readout Infinitely variable feed on all 3 axes Coolant system Brake motor Rigid angle table New LED work lamp New leveling feet Technical documentation in PDF format Scope of Refurbishment Workshop-tested and partially refurbished Technical inspection of all functions Repair or replacement of defective components Complete basic cleaning Readjustment of all settings as required Replacement of all lubricants Replacement of selected standard and various wear parts New paint finish in RAL 7035 / 7016 The conscious decision for a partial refurbishment provides an optimal balance between operational safety, cost-efficiency, and availability. A full regrinding of the guideways was not carried out, as there was no technical necessity for it. Scope of Delivery Machine loaded free of charge Delivery time approx. 12 weeks