Stroj za površinsko brušenje

Bernardo BSG 4080 TDC

Stanje: generalkompletno obnovljen (rabljeno), Leto izdelave: 2025, obratovalne ure: 36 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 1024-54, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: approx. 1600 kg Customs tariff number: 8460.2920 Dimensions: 235x155x145 cm TECHNICAL SPECIFICATIONS: MAIN DIMENSIONS: Center height: 100 mm Distance between centers: 400 mm LONGITUDINAL SLIDE: Maximum travel: 420 mm Minimum automatic travel: 1 mm Table feed rate: 100–3500 mm/min Reversal dwell time: 0–5 sec Table tilt angle (400/650 mm): 30°/15° CROSS SLIDE: Maximum travel: 170 mm Rapid traverse: 30 mm Plunge depth per diameter: 1.9 mm Feed 1: 0.03–1.5 mm/min Feed 2: 0.02–0.3 mm/min Plunge feed per pulse: 0.0005–0.025 mm WHEELHEAD: Grinding wheel (diameter x width x bore): 350 x 32 x 127 mm Drive power: 3 kW Peripheral speed: 30 m/s Spindle speeds: 1600/1975/2200 rpm Manual travel: 120 mm Swivel range to the right: 15° + 30° Optional wheelhead guard for max. wheel set width: 50 mm WORKHEAD: Swivel range: 0°–90° Spindle speeds (nw): 80/175/380/800 rpm Internal taper: Morse 4 Collets: W-20 Drive power: 0.5 kW Max. workpiece weight: 20 kg Max. load during unsupported grinding: 12 Nm Optional continuously variable drive, adjustment range I: 30–300 rpm Optional continuously variable drive, adjustment range II: 120–1200 rpm TAILSTOCK: Internal taper: Morse 2 Quill travel: 20 mm GUARANTEED WORKING ACCURACY: Straightness of generator: Between centers 400 mm Measured over 400 mm: 0.002 mm Between centers 650 mm Measured over 650 mm: 0.003 mm Roundness deviation for unsupported grinding: 0.0004 mm CONNECTION VALUES: Iasdpfjw T Sc Njx Af Tel Power consumption: max. 8 kVA Admissible voltage variation: –15% to +10% Admissible frequency variation: +/- 3% Compressed air: 5 bar Unless otherwise stated, technical data is provided without obligation or warranty.

Stanje: dober (rabljeno), Leto izdelave: 2014, 900 mm premer vrtenja, 650 mm maksimalni obdelovalni premer, 992 mm maksimalna dolžina struženja, vreteno do 1000 min⁻¹, premer izvrtine vretena 275 mm, revolver z 10 postajami, vretenski motor 45 kW, krmilje FANUC Series 32i, močanske vpenjalne glave s 3 čeljustmi, konjiček, transporter za odrezke, hladilna naprava, Iajdowwtrbspfx Af Tsl

Stanje: rabljeno, Leto izdelave: 1995, Funkcionalnost: popolnoma funkcionalen, Tool grinding machine Jungner, Sweden Year of manufacture: 1995 Accessories Ijdpfx Aowdihrjf Toal

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2017, obratovalne ure: 6.900 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 300 mm, Največja teža obdelovanca: 500 kg Pomiki: X: 350 mm Y: 250 mm Iasdpfjv Ai Ukjx Af Tjl Z: 300 mm C: 360° Leto izdelave: 2017 16-pozicijski izmenjevalec RTC

Stanje: rabljeno, Leto izdelave: 2007, Maximalni prečnik struganja 42 / 140 mm Dužina struganja 170 mm Upravljač Mitsubishi Meldas Obrtaji vretena 80–8.000 o/min C-osovina 0,001° Revolverska glava (x-puta) 2x 12 (VDI 20) pogonjena Obrtaji revolverske glave 45–4.500 o/min Snaga vretena 1 kW Abgreif stanica 42 mm Obrtaji 60–6.000 o/min Iajdovyli Eepfx Af Tol C-osovina 0,001° Broj upravljanih osa 8 Uređaj za stezanje steznih čaura 48 DIN 6343 Radni sati 10.769 h Transporter strugotine da/godina 2018 Ukupna snaga 7,5 / 11 kW Težina mašine cca. 3,3 t Dimenzije cca. 2,4 x 1,6 x 2,2 m CNC strugarsko-glodalica CITIZEN BOLEY BE 42, godina 2007 Simultani rad sa 7 osa na glavnom i prihvatnom vretenu Vrlo dobro stanje, radni sati 21.999 h (septembar 2024) Oprema: # razni nosači alata: 5x aksijalni pogonjeni nosač alata # stezno telo za stezne čaure, tip 173E # dodatni rashladni uređaj # transporter strugotine Knoll, godina proizvodnje 2018 Boley BE 42 se prodaje bez automatskog magazina za šipke. Interfejs za povezivanje postoji. Zamena kompletnog seta baterija izvršena 22.12.2025.

Stanje: rabljeno, Surface Grinding Machine BLOHM Type HFS 6 Serial No.: 10493 Year of manufacture: 1973 Electromagnetic Chuck 600 x 300 mm Grinding Length 600 mm Grinding Width 400 mm Table Longitudinal Travel max. 650 mm Cross Travel 350 mm Distance Spindle Center - Table Surface max. 600 mm Distance Spindle Center - Magnetic Chuck max. 517 mm Table Clamping Surface 1020 x 300 mm Grinding Wheel Diameter 300 mm Grinding Wheel Width 50 mm Grinding Wheel Bore 76 mm Table Longitudinal Feed 2-30 m/min infinitely variable Table Cross Feed 2-65 mm infinitely variable, electric Cross Rapid Traverse 3 m/min Vertical Feed 0.001 - 0.020 mm per indexing pulse Vertical Rapid Traverse 0.250 m/min Grinding Wheel Speed 1400 / 2800 rpm Hydraulic Pump Motor Power 2.2 kW Grinding Spindle Motor Power 5 / 6 kW Power Supply 380 Volt, 50 Hz Total Power Requirement 11 kW - automatic downfeed - hydraulic table longitudinal travel - grinding wheel dressing unit on spindle head - electromagnetic chuck, build height 83 mm - separate coolant system with magnetic filter in filter housing - grinding spindle circulation lubrication Isdpfx Aed Hbafof Toal - separate switch cabinet (800 x 500 mm) - swiveling control panel - operating manual and spare parts book Space required (L x W x H) 3000 x 2200 x 2100 mm Weight surface grinding machine 3000 kg Weight switch cabinet 200 kg Good condition

Stanje: novo, Discover our selection of robust and precise conventional lathes Are you looking for a reliable lathe to boost your productivity? Experience precision and performance with our new range of conventional lathes, complete with extensive accessories. Our machines offer turning diameters from 400–1000 mm and turning lengths up to 10 metres, and are also available as cycle-controlled variants. With various models, you have limitless possibilities. Many machines are in stock and available at short notice! Explore our comprehensive range of special accessories, such as hollow spindles, infinitely variable spindle speeds, Siemens controls, and much more—making your lathe even more versatile. Whether for complex workpieces or demanding applications, our machines always provide the best results. Iasdpfx Afsd Afn Ie Tol Rely on our many years of experience and let’s optimise your machining processes together. Invest in quality and precision—contact us today! Here is a selection of STOCK MACHINES (see images); on request, we are happy to offer other models or custom-built machines: TECHNICAL SPECIFICATIONS: DLZ Series including BAFA subsidy of 15% and more! Swing over bed: 400–1000 mm Turning length: 1000/1500/2000/3000 mm Spindle bore: 80 (optionally 105) mm Workpiece weight up to 2 t Spindle speed up to 2800 rpm ACCESSORIES: Digital readout, 3-jaw chuck, faceplate, Multifix toolholder, and much more. Extensive SPECIAL ACCESSORIES such as stepless spindle speed, steady rests, larger spindle bores, etc. to make the machine even more productive: CURRENTLY AVAILABLE NEW MACHINES with warranty and BAFA subsidy, e.g. - SDM 850: swing over bed 850 mm, turning length 3 m - DLZ 325: swing over bed 650 mm, turning length 2 and 3 m - DLZ 250: swing over bed 500 mm, turning length 1 and 1.5 m - DLZ 200: swing over bed 400 mm, turning length Further models (including cycle control) available on request. Contact us now and discover the world of innovative turning technology! Our services for you: • Consultation and solutions directly at your site • Organisation of transport for your machine to your facility • Delivery, installation, commissioning, and handover ready for operation • Financing and review of grant opportunities through KFW and BAFA, among others.

Stanje: rabljeno, Arbeitslänge: 5.500 mm Blechstärke: 13 mm Technische Merkmale: * 3-Walzen-Betrieb * Oberwalzendurchmesser: Ø 500 mm * Seitenwalzendurchmesser: Ø 300 mm (jeweils) * Hydraulische Haltearme links/rechts * Hydraulischer Hubturm Ijdpfx Afe Dvlis Tsal * Hydraulische Vorbiegung

Stanje: rabljeno, Technical Details: Ram stroke - max.: 250 mm Workpiece diameter - max.: 80 mm Max. workpiece length: 900 mm Ijdpfx Afjw Au I Ij Tsal Total power requirement: 1.5 kW Machine weight approx.: 2.1 t Various accessories

Stanje: rabljeno, Leto izdelave: 2002, Grinding diameter 350 mm Grinding length 1000 mm Centre height 175 mm Space requirement approx. 3.6/3.5 m Photos are of an identical machine with a centre height of 225 mm. Base: Kellenberger Kel-Varia UR175-1000 Kelco 120 Grinding Head UR with T1-T2-T3 Standard Equipment: Ijdpfx Afsuxfuce Toal -T1: 500 mm grinding wheel diameter -T2: 400 mm grinding wheel diameter -B-axis infinitely adjustable, high resolution -Marposs measuring system for tool measurement -Active longitudinal positioning -ELASO GAP control on T1 and T2 contactless, integrated into the control interface -Semi-automatic balancing by ELASO, integrated into the control interface -Tailstock with manual retraction -Workpiece spindle MK5 with short taper mounting DIN 55026 -Internal grinding device, belt-driven Options (at additional cost): - New high-precision workpiece spindle with torque drive - Internal grinding attachment for high-frequency spindles, 120 mm diameter - HF internal grinding spindle Fischer MFM-1224/42/31 D-21 - HF spindle with HSK interface 24,000 rpm with integrated GAP sensor (delivery time applies) - CNC-controlled C-axis - Non-circular grinding - Hydrostatic lead screw in X-axis - New hydrostatic unit with only 1 pump and accumulator for improved energy efficiency - Monitoring of water content in the hydrostatic system - Extraction system Further options available on request Mechanical Overhaul: - Complete machine overhauled according to Kellenberger measurement protocol - New, maintenance-friendly enclosure - New paintwork Electrical Overhaul: - New, modern CNC cylindrical grinding machine control with BEMA cylindrical grinding interface - Newly built control cabinet - New drive technology - Replacement of all electrical wiring, pressure switches, etc. - New absolute glass scales in X and Z - New absolute rotary encoder (on B-axis) Control System: The grinding software consists of a basic licence and various options, which are available depending on the configuration of the machine. Software Base Functions: - External and internal oscillation grinding - External and internal plunge-cut grinding - External and internal face oscillation grinding - External and internal face plunge-cut grinding - External and internal taper oscillation grinding - External and internal radius grinding (radius dressed onto the wheel) - Semi-automatic oscillation grinding - Workpiece zero setting - Grinding wheel zero setting - Measurement of dressing diamonds - 2 profile dressing diamonds - 1 profile diamond or dressing roll (dressing roll required) - Profile roll (dressing roll required) - 3 flat dressers - Corrections - Z-position measurement (probe required) - GAP sensing (touch-up device required) OPTIONS (at additional cost): Software Profile Plunge Grinding: - External and internal profile plunge-cut grinding with profile wheel Software Profile Grinding: - External and internal profile grinding with straight wheel Software Thread Grinding: - Single- and multi-start external and internal thread grinding with thread on the wheel dressed. Dressing of single- and multi-groove wheels. Flank angle freely selectable. Software Trapezoidal Thread Grinding: - Additional dressing of trapezoidal threads possible External and internal non-circular plunge grinding: - External and internal non-circular oscillation grinding Software Non-circular Grinding: Prerequisite for non-circular grinding is equipping the workpiece axis with a high-resolution rotary encoder so the axis can be o