Aluminij Krožna žaga

BERG & SCHMID VELOX 350 PN

Stanje: novo, Premer žaginega lista 350 mm Območje reza pri 90 stopinjah: okroglo 120 mm Nsdpfx Ajw Tdwfedyjwb Območje reza pri 90 stopinjah: kvadratno 110 mm Območje reza pri 90 stopinjah: plosko 200x88 mm Območje reza pri 45 stopinjah: okroglo 115 mm Območje reza pri 45 stopinjah: kvadratno 110 mm Območje reza pri 45 stopinjah: plosko 150x80 mm Potrebna skupna moč 1,5/1,8 kW Teža stroja cca. 0,22 t Dimenzije (D x Š x V): 0,7 x 0,9 x 1,9 m POZOR: AKCIJSKA CENA!!! - Poševni rez levo/desno 45° - Glava poševno do 45° (Schifter) - Miza z ležaji - Podstavek stroja - Nov žagin list - Mikro pršilni sistem

Leto izdelave: 2009, obratovalne ure: 214 h, Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Thin-cutting frame saw DSG Sonic – Wintersteiger AG Model / Type: DSG Sonic Year of manufacture: 2009 Technical condition: EXCELLENT, only 214 operating hours Technical specifications: DSG Sonic – technical data (Wintersteiger) 🔹 Cutting and block parameters: - Feed speed: approx. 1.7 m/min - Saw frame stroke: 210 mm - Number of frame strokes: approx. 550/min Cutting heights with different blade lengths: Blade length 380 mm → cutting height: 30–88 mm (with Air Jet and magazine), 45–88 mm (with twin planer) Blade length 420 mm → cutting height: 30–128 mm, 45–128 mm Blade length 500 mm → cutting height: 80–210 mm, 45–210 mm Blade length 550 mm → cutting height: 80–254 mm, 45–254 mm Block lengths: For standard machine: +185 mm With magazine: 250–1700 mm With twin planer: +250 mm Block height difference: ±0.5 mm Cutting width with side fence: 140 mm 🔹 Additional technical data: Cutting width with middle fence: 2 × up to 60 mm Optional channel width: 2–4 × 15–60 mm Minimum lamella thickness (depending on wood type and cutting height): >1.5 mm Material loss when cutting (kerf thickness): from 0.9 mm Nwsdpjw Dp Ufjfx Adyob Saw blade life (depending on wood type): ~40 hours Machine weight: - Basic version: 3,000 kg 🔉 Noise levels (hearing protection required): At the machine (1 m): - Idle run: 97 dB(A) - Cutting: 99 dB(A) At operator workstation: - Idle run: 85 dB(A) - Cutting: 88 dB(A) 🌬️ Extraction and air system: Extraction: - Two connections: Ø 120 mm and Ø 150 mm - Capacity: 3,200 m³/h (30 m/s) Operating air: - Min. 6 bar - Consumption: 200 l/min Lubrication: central, with guide rail monitoring ⚡ Electrical data: - Power supply: L1, L2, L3 + PE - Connecting cable cross-section: up to 16 mm² - Control cable: 2 × 1.5 mm²

Stanje: rabljeno, Number of spindles: 6 pcs. Working width: 230 mm Nodpfju Su Hujx Adyewb Planing height: 120 mm Planer table length: 2500 mm Feed motor: 3 kW Feed speed: 5–24 m/min Total power requirement: 27 kW Dimensions (L/W/H): 3900 x 2200 x 2000 mm Machine weight approx.: 2500 kg Weinig Four-Sided Planer Profimat 23, window version with glass bead separation (can also be used as a grooving spindle) ATS control and program control ----- Machine is currently being overhauled and functionally tested Technical data summary (please ask for details on any additional included accessories) General ----- > Working width: 230 mm > Working height: 120 mm > Number of spindles: 6 pcs. > Planer table length: 2500 mm > Feed motor: 3 kW > Feed speed: 5–24 m/min > Total power requirement: 27 kW > Dimensions: 3900 x 2200 x 2000 mm > Machine weight approx.: 2500 kg Spindle configuration ----- > Spindle 1: bottom > Spindle 2: right, pneumatically cycling up/down > Spindle 3: left > Spindle 4: top > Spindle 5: bottom > Spindle 6: glass bead saw, pneumatically cycling up/down Spindle specifications ----- > Spindle 1: 4 kW, 6000 rpm, 40 mm diameter > Spindle 2: 7.5 kW, 6000 rpm, 40 mm diameter > Spindle 3: 6000 rpm, 40 mm diameter > Spindle 4: 5.5 kW, 6000 rpm, 40 mm diameter > Spindle 5: 4 kW, 6000 rpm, 40 mm diameter > Spindle 6: glass bead saw, 2.2 kW, 6000 rpm, 40 mm diameter Other features ----- > Glass bead separation or usable as a grooving device > ATS control: automatic 2-axis positioning for width and height (left and top spindle) with program memory for 99 programs > Machine operation: window package Joint operation of the right spindle and the glass bead discharge via manual selector switch on the control panel > Spindles with mechanical digital readout Option: Used planer heads available (technical data according to manufacturer – subject to prior sale and not guaranteed!)

Leto izdelave: 2026, Stanje: novo, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: PVC TEK KAFALI ÜRETİM GRUBU, • Sağlar mogućnost proizvodnje 40 - 60 prozora u radnom okruženju od 8 sati. • Naš set, sa raznim opcijama mašina, pruža najpovoljniju cenu za kupca. • Dostupne opcije za 380 volti ili 220 volti. • U skladu sa CE (evropskim) standardima. • Isporuka na adresu sa cenama za sve delove sveta. • Stari kupci iz vaše zemlje mogu vam poslužiti kao reference. SADRŽAJ MAŠINSKOG SETA • SC101 S Mašina za varenje jednog ugla • SC 211 Mašina za podešavanje srednje letvice za aluminijum & PVC (2 noža) • SC 301 Mašina za sečenje PVC lajsni ili SC 301 S Mašina za sečenje lajsni za aluminijum & PVC bez kalupa (primenljiva na 12 različitih lajsni) Nedpfx Asrc H Hfjdyjwb • SC 401 Mašina za donje sečenje aluminijuma & PVC-a (uključuje Ø450 mm testeru) • SC 501 Mašina za bušenje ručke, otvaranje kanala i odvod vode za PVC ili SC 502 S Mašina za bušenje ručke, otvaranje kanala i odvod vode za aluminijum & PVC (sa visokofrekventnim motorom) • SC 601 Mašina za čišćenje uglova PVC-a (3 noža)

Stanje: novo, Leto izdelave: 2026, Crosscut and Mitre Saw Type: ZS 200 N - 5 kW Motor with machine stand, Tiltable via handwheel and worm gear (rear) Saw blade diameter: 520 mm, blade arbor hole: 50 mm Saw blade speed: 2,800 rpm 400 V / 5 kW (S6/40%) motor with brake and automatic star-delta starter Cutting width at 90°: 420 mm Cutting width at 45° (swiveled): 295 mm Cutting height at 90°: 200 mm Cutting height at 45° (tilted): 140 mm The saw can be swiveled to approx. 25° for acute angles on one side, and tilted flat to the left up to 30°. TCT circular saw blade 520 x 4.0/2.8 x 50 mm 60 WZ, negative rake, for wood RLH-ST60 measuring stop and roller conveyor, 6.0 m measuring length, mounting side: left Heavy-duty design, length stop carriage adjustable from operator side via handwheel, electronic digital display, stop carriage pneumatically clamping, flip-away stop flap towards the rear, with steel rollers, 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 4 support feet and adapter piece, total length: 6.7 m Surcharge for digital electronic display unit type: FIAMA EP6 for 230 V mains operation, with electric on/off switch and socket. Bright dark red LED display. Higher accuracy than the battery-powered crystal display. RO-ST60 infeed roller conveyor, 4.0 m long, mounting side: right Heavy-duty design, steel rollers 60 mm diameter, roller spacing 200 mm, roller width 400 mm, with 3 support feet and adapter piece Nwedpok H Ic Uefx Adyjb Location: Ex stock, 54634 Bitburg - Immediately available - Image: similar. Machine is still in original packaging.

Stanje: novo, Saw blade diameter: 370 mm Cutting range at 90°: round 120 mm Cutting range at 90°: square 100 mm Cutting range at 90°: rectangle 180x100 mm Working height: 925 mm Saw blade speed: 17 – 70 rpm Total power requirement: 3.0 kW Machine weight approx.: t Space requirements approx.: 1.9 x 1.45 x 2.1 m SPECIAL OFFER PRICE!!! High-performance vertical circular saw, hydropneumatic fully automatic (20195) · Mitre cutting: left 60° & right 45° · Hydro-pneumatic control of the saw unit · Electro-pneumatic material feed unit · Smooth-running, powerful worm gear drive with large gear ratio, integrated in a robust cast housing for optimal cutting results · Vise with double clamping arm for burr-free cuts, additionally with lateral quick-shift for mitre changes · Precision prismatic guideway for gearbox head, laterally adjustable · Particularly robust base frame with built-in cooling system · Large chip drawer · Chip removal brush integrated in the saw blade cover CNC Control: · With control panel for more than 90 different sawing programs with 99 sub-programs for length, quantity, and angle Njdpfx Adod Iin Esyswb · Automatic feed unit 2,000 mm via ball screw, incremental feed with automatic length compensation. Adjustable for cut lengths from 25 to 9,999 mm. · Fully hydraulic control of saw frame and clamping fixtures · Preselection of 3 different material feed rates · Visualization of the complete work process with simple data input ATTENTION: Price does not include saw blade! (Saw blade price: €204)

Stanje: novo, Leto izdelave: 2026, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: SÇ 1000 DİJİTAL METRE, • 3 metre dolžina • +/- 0,1 mm merilna natančnost Nwedjrblaljpfx Adyob • Servomotor (opcijsko) • Opcija decimalnega načina delovanja (zlasti za aluminij) • Opcija merjenja preko Bluetootha (za podrobnosti nas kontaktirajte) • Napetost 220 V • Zaslon na dotik • Funkcija pomikanja naslona nazaj z enim gumbom za enostavno odstranjevanje izdelka iz kalupa • Uporabniku prijazna zasnova • Enostavna kalibracija

Stanje: novo, Saw blade diameter 315/350 mm Cutting capacity at 90°: round 125 mm Cutting capacity at 90°: square 110 mm Cutting capacity at 90°: flat 160x90 mm Cutting capacity at 45°: round 105 mm Cutting capacity at 45°: square 90 mm Cutting capacity at 60°: flat 80x100 mm Total power requirement 1.8/2.5 kW Machine weight approx. 0.2 t Space requirement approx. 0.6 x 1.22 x 1.06 m The large workshop saw with advanced technology. (20070) • For miter cuts left and right up to 45°, end stop at 90° and at 45° left • For cutting steel, stainless steel, and, to a certain extent, aluminium profiles • Vise with quick-clamping lever, longitudinally adjustable jaw, adjustable guide, and double clamping arm for burr-free cuts • Cone safety clutch made of hardened steel to protect the saw blades • Large base plate made of solid cast iron for maximum stability and vibration-free sawing • 2 speeds: 30 + 60 rpm • High-performance special gearbox with elastic coupling for heavy-duty applications Nwsdpfx Adod Iin Tjysb • Automatic cooling directly on the saw blade • Saw head with double bearings • 24 V safety switch in handle with restart interlock • Length stop, assembly tools ATTENTION: Price does not include saw blade!!!

Stanje: novo, premer žaginega lista: 400 mm, - Saw blade 400 mm - Double mitre - 4 pneumatic clamps - Mist lubrication system Nsdpfx Adeu Si Ndoyjwb - Air blow gun - Protective cover - Documentation - 400V

Stanje: novo, Leto izdelave: 2024, pritisk: 8 letvica, Horizontal mitre adjustment 15°–90°15°, stepless Saw motor 5.50 kW (400 Volt) Saw blade Ø 600 mm Travel range rear stop 180 mm Working height 940–1000 mm, adjustable via feet 2 x extraction ports (top of hood and bottom) Net weight 600 kg WxDxH 135x140x150 cm RAL 9007 Grey Aluminium Rotary table made from ground nickel steel Saw head with recirculating ball guides, designed for high accuracy, long service life, and high rigidity. Material can be pre-clamped with low pressure when the hood is open. Hydropneumatic blade feed Chip flow directed toward extraction hood. Equipment • Precision underfloor circular saw • Mitre adjustment 0º/45º/90º/-45º/-60º, stepless • Incl. 2 pneumatic vertical clamps Nodpfsgwt S Tsx Adyswb • Infinitely variable saw blade feed rate • Two-hand safety control • Adjustable rear material stop • Chip extraction device – chip extraction system • Mist spray unit for air-oil cooling • Air pistol with spiral hose • Incl. maintenance unit with pressure reducer • Ergonomically arranged control panel • Max. cutting height 230 mm • Saw blade Ø 600 mm • Saw blade not included in delivery! Our NC pusher system ensures your workpieces are positioned at the desired working position on our UK 600 HA 90°. A gripper clamp secures the material, and the NC control automatically positions it. Afterwards, the clamping and sawing process is activated. Positions are pre-programmed in the control system. Once the machining operation is completed by the machine, it automatically moves to the next sawing position. Depending on the workpiece, multiple parts can also be clamped and positioned simultaneously, stacked or side by side. You are welcome to inspect the desired machine at any time in our manufacturing/demo hall. Please feel free to contact us regarding this. Plantec Maschinen GmbH