Laserski označevalni sistem

BeLaser LMF-p30

Stanje: novo, Leto izdelave: 2026, potovalna razdalja osi X: 600 mm, pomik osi Y: 500 mm, pomik po osi Z: 755 mm, skupna višina: 2.280 mm, skupna dolžina: 1.445 mm, skupna širina: 19.975 mm, skupna masa: 2.600 kg, Tehnični podatki: Pomiki: X: 600mm Y: 500mm Z: 755mm W: 500mm W-tip: Servo-motor Dimenzije (Š x G x V) 1975 x 1445 x 2280 mm (maks. 2785 mm) Potrebni prostor (Š x G x V): 2100 x 1600 x 2900 mm Uporaben premer elektrode: ø 0,1 ~ ø 3,0mm (do ø 6,0mm opcijsko) Nodpfxey R Npvj Anpswn Uporabna dolžina elektrode 800 mm Teža stroja: 2600 kg Največja teža obdelovanca: 1000 kg Moč: 3ø 380V 50~60Hz (nastavljivo) Največji dovoljen tok: 30A Nazivna zmogljivost: 5KVA Potreben pnevmatski tlak: 5 bar Ionski izmenjevalni sistem s senzorjem

Stanje: dober (rabljeno), potovalna razdalja osi X: 350 mm, pomik osi Y: 250 mm, pomik po osi Z: 350 mm, teža obdelovanca (maks.): 200 kg, širina mize: 300 mm, skupna masa: 800 kg, vrsta vhodnega toka: trifazni, dolžina mize: 600 mm, dolžina obdelovanca (maks.): 400 mm, Elektroerozijsko vrtanje z visokim izkoristkom Znamka: Tecnosystem Model: D3-DM Prikazovalnik koordinat FAGOR 3 osi NV 300E Gib: - Os X: 350 mm - Os Y: 250 mm - Os Z: 350 mm Hitrost vrtenja elektrode: 200 vrt/min Nwsdpfxez Dt Uke Anpsn Gib glave: 200 mm Dimenzije mize: 600 x 300 mm Največja teža obdelovanca: 200 kg Kapaciteta dielektrične tekočine: 200 l Kapaciteta vrtanja: Premeri svedrov/elektrod od 0,3 mm do 6,3 mm. Največja dolžina elektrode: 400 mm Teža: 800 kg Tecnosystem D3-CM je stroj za elektroerozijsko vrtanje z visokim izkoristkom (ali elektroerozijsko vrtanje/super vrtalni stroj). V obdelovalnih delavnicah se običajno uporablja kot pomožna oprema za rezanje z žico, za izdelavo začetnih lukenj, skozi katere se nato vodi rezalna žica. Funkcija: Vrtanje z visokim izkoristkom z električnim lokom na prevodnih materialih (kaljena jekla, trda jekla itd.) z uporabo rotirajočih se cevnih elektrod iz medenine ali bakra. Ključne aplikacije: Vrtanje lukenj za vstavljanje žice za elektroerozijsko obdelavo, odstranjevanje zlomljenih navojev in majhnih lukenj za hlajenje ali izmet v kalupih in matricah. Sistem: Vbrizgavanje dielektrične tekočine pod visokim pritiskom skozi cevno elektrodo.

Stanje: novo, Leto izdelave: 2025, Funkcionalnost: popolnoma funkcionalen, laserska moč: 20 W, 19" Built-in System – Model 2025 – the marking champion among laser engravers! Laser Class 4 Metals – plastics and much more! • EZCAD 3 (genuine 64-bit card) with up to 4 axes • Intel i5 or AMD Ryzen with 32GB RAM and ultra-fast M.2 SSD, integrated in the 19" rack-mount enclosure • 23" TFT monitor for fatigue-free working • Windows 11 Professional 64-bit pre-installed • Professional JPT MOPA fiber laser source with 20W power and up to 600 kHz (optional: variable pulse width and up to 200W power for color-annealing marking and cleaning) • "DigiScan Eco 10" scanning unit for high detail and precision • Scanning area approx. 100 x 100 mm (optional: 150/200/300 mm) • 19" aluminum rack enclosure • 2 m fiber cable incl. laser head mount for easy installation • Professional German-language marking software • Barcode and QR code support • Serial number functionality • Batch scanning from Excel file, network, or database! • Laser parameter finder using matrix across 2 parameters (e.g. frequency to speed, frequency to power) • TCP/IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows for the seamless integration of external components like camera position detection. • Industry 4.0: System status can be processed at any time via TCP/IP protocol • Optocoupler-isolated inputs and outputs for automation (24V PNP logic) • New look & feel. A fresh design for even clearer and more comfortable operation • 3D preview for rotary axis processing • Up to 50% performance boost through 64-bit technology • Improved stability thanks to the latest drivers • Optional control of up to 4 axes WITHOUT switching, via PLUGINs • DEEP engraving function (slicer software for Z-axis control) • New, optimized hatching algorithms for highly efficient marking • New galvo generation (Eco, Hi-Speed & 3D) with dual laser pointer for visual focus check • Connection option for external fume extraction • Start button and EMERGENCY STOP on the housing, as well as external ports for X, Y, Z, and A axes • Operating manual and control software in German Optional extras include: => Enclosure for Laser Class 1, available as table or stand model with castors and space for extraction system => IPG or SPI fiber laser sources in various power ratings => LED status bar (green/yellow/red) => Scanlab equipment => Suitable extraction systems => Automation for part loading, conveyor belts, and much more! => 3D marking and ENGRAVING function => Automatic focus adjustment via specialized laser sensor => Rotary unit in various versions => Motorized X and Y axes => Interlock system for marking WITHOUT protective housing, using only PPE (personal protective equipment) for bulky parts Includes training at our training center in Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt facility! Therefore, bespoke solutions are always possible! => Made in Schweinfurt! Images may show optional equipment! Nedpfx Anjuxnwmjpswn We are your partner for laser engraving machines and laser markers. Whether manual or automated laser marking systems, we are happy to provide you with a quote.

Leto izdelave: 1979, stanje: generalkompletno obnovljen (rabljeno), Funkcionalnost: popolnoma funkcionalen, TECHNICAL DETAILS Centre height: 125 mm + heights of 50 mm Distance between centres: 1,000 mm Grinding wheel › Diameter: 400 mm › Width: 50 mm › Bore: 127.0 mm Swivel angle: 270° Workpiece spindle head speed: 20 – 400 rpm Spindle taper: 5 MT Nodpfx Anek H Hp Nspjwn Tailstock taper: 3 MT Table swivel angle: 8° Table speed: stepless up to 6.0 m/min Internal grinding spindle with 60,000 rpm External grinding wheel motor: 4.0 kW Workpiece spindle motor: 1.5 kW Machine weight: 3,100 kg Machine dimensions: 2,860 × 1,680 × 1,670 mm (L × W × H) EQUIPMENT & SCOPE OF DELIVERY • Machine has been completely retrofitted • New control cabinet & new circuit diagram • New motor & frequency converter for the workhead • 2-axis DRO • Coolant tank with paper filtration • Geometry manufactured according to Kellenberger protocol • Internal grinding spindle • Extensive accessories Please refer to the attached inspection report for further information on the machine.