Stroj za rezanje stekla

BAVELLONI REV 372 SR

Stanje: dober (rabljeno), Leto izdelave: 2010, Upogibni stroj z maksimalnim pritiskom 400 ton maksimalna delovna dolžina 5100 mm maksimalni hod 365 mm 34 kW Skupna teža 38 ton Iisdeyh T Srspfx Aliod

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system Iijdsx D H Hcspfx Alisd • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2016, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 7.000 mm, pomik osi Y: 3.200 mm, pomik po osi Z: 1.500 mm, skupna dolžina: 10.500 mm, dolžina mize: 6.000 mm, širina mize: 3.000 mm, skupna širina: 7.475 mm, hitrost vretena (min.): 2.670 obr/min, največja hitrost vretena: 18.000 obr/min, skupna višina: 5.380 mm, višina mize: 300 mm, MOSTNA REZKALNA STROJ FPT INDUSTRIE DINOMAX 3 TEHNIČNE LASTNOSTI Znamka: FPT Industrie Model: Dinomax 3 Leto: 2016 Iiedpfxoy Ta Tks Alijd CNC: Heidenhain TNC 640 Miza: 6000 x 3000 mm Pomik X: 7000 mm Pomik Y: 3200 mm Pomik Z: 1500 mm Magazin za 40 orodij (25 mest ISO 50 / 15 mest HSK A63) Pick Up magazin za glave, 3 pozicije Notranje hlajenje 20 Bar Filter za emulzijo Sistem video nadzora med obdelavo Autocal (programska oprema za samodejno kalibracijo) MAPR (merilna in poravnalna sonda ISO 50) MRLUL (laserska preverjevalna sonda)

Stanje: zelo dobro (rabljeno), 3-osni (X-Y-Z) CNC OBDELOVALNI CENTER Premična plošča (obdelovanec), premični delovni glavi Vertikalna plošča (obdelovanec) Krmiljenje POWERCONTROL + POWERTOUCH Programska oprema woodWOP Varnostna kabina delovne glave Št. 1 blokada za vpenjalne čeljusti obdelovanca na delovnem področju Pogon obdelovanca s transportno verigo Minimalne dimenzije obdelovanca (X-Y-Z) mm 200 x 70 x 12 Maksimalne dimenzije obdelovanca (X-Y-Z) mm 3050 x 850 x 60 Skupna priključna moč (kW) 11,5 (pribl.) DELOVNE SKUPINE: Št. 1 vrtalnih agregatov (moč (kW) 2,3) z vertikalnimi vreteni: - Št. 13 neodvisnih vertikalnih vrtalnih vreten (V13 High Speed) - Št. 6 neodvisnih horizontalnih vrtalnih vreten (4 v osi X + 2 v osi Y) Št. 1 rezkalna žaga za utore (za obdelave v X-osi); premer (mm) 100 Št. 1 vertikalno glavno vreteno (rezkalni agregat) HKS63 (moč kW 5) Avtomatski sistem menjave orodij – število mest v magazinu (št. 4 mest za orodja) Iijdpoyywcvjfx Alied

Stanje: dober (rabljeno), Leto izdelave: 2001, Manufacturer: KASTO Model: KASTOtec A3 Year of manufacture: 2001 Specifications Ijdpeu R R Acofx Alijid Metric Sawing capacity round 90°: 330 mm Sawing capacity flat 90°: 330 x 330 mm Maximum sawing speed: 12 - 120 m/min Saw blade dimensions: 6830 x 41 x 1.3 mm Power: 7.5 kW Dimensions (approximate): - Length: 4600 mm - Width: 2150 mm - Height: 2310 mm Weight: 4300 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. Details are given in good faith but accuracy cannot be guaranteed. No representation or contractual terms are implied. We recommend verifying all critical details independently.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, - 3-osiowe centrum CNC SCM Pratix S - model PRATIX 12B z 2012 roku. - Zakres osi X, Y, Z: 2500x1250x150+ mm - Liczba miejsc na narzędzia w magazynie: 8 - Stół maszyny: stół aluminiowy rastrowy, 2 sekcje. - Sterowanie: sterowanie PC - Oprogramowanie: SCM NESTING, SCM XILOG MAESTRO - Numer seryjny: AH/115920 Liczba osi frezujących: 1 Agregat wiertarski: 1 – praktycznie nieużywany Maksymalna prędkość obrotowa wrzeciona: 24 000 obr./min Uchwyt narzędziowy: HSK-F63 Silnik główny: 6,6 kW Konstrukcja bramy: maszyna z ruchomą bramą Pompy próżniowe: 2 szt. BECKER z 2012 roku – jedna ustawiona na zewnątrz, druga zainstalowana w maszynie. Wydajność pomp próżniowych m³/h: 240/280 m³/h Iiedpfsuu Ntgex Alied Interfejs do odczytu formatu CAD (.dxf) Zabezpieczenia: Odrzuty Waga ok. 2500 kg Długość: 5900 mm Szerokość: 2790 mm Wysokość: 2190 mm Automatyczny pomiar długości narzędzia

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2024, This FORMAT4 TEMPORA 60.06 glueBox x-motion edgebander was manufactured in 2024. It features a rotary magazine table with a diameter of 750 mm for edge material from 0.4–3 mm, a GlueBox application unit, as well as top and bottom polishing units. The machine is equipped with an advanced x-motion Plus control system featuring a 15" SmartTouch display and a multifunctional milling unit for precise processing of plastic edges. Contact us for more information on this machine. Additional equipment • Application unit with Teflon coating for 1.5 kg EVA granulate • Top and bottom polishing unit Machine advantages Technical machine benefits • Height adjustment for positioning of workpieces: 8–60 mm • Rotary magazine diameter: 750 mm for edge material 0.4–3 mm in rolls • Rotary magazine for edge material with ball bearings, plate diameter: 740 mm • GlueBox application unit • Milling unit with two motors: 0.35 kW (1 HP), 12,000 rpm, HW saw blades, Z 24, D-100x20x3.2 mm, pneumatically tiltable 0°–10° • Top and bottom multifunctional milling units // top and bottom profile sanding machine x-motion plus, for processing plastic edges of 2 and 3 mm • Motorized corner rounding unit with 2 motors, electronic adjustment for milling the front and rear edge profiles of the top/bottom edge for edge thickness of 0.4–3 mm and feed speeds up to 10 m/min • Pre-milling unit with assigned diamond-tipped cutters, speed 12,000 rpm, 2x 1.5 kW • Edge and workpiece thickness measurement with Bluetooth technology Additional information Power supply: 3x400V 50/60Hz Chain feed with 2 speeds, feed rates: 10 and 18 m/min Iijdpfx Alex D Hbteiod Control system: x-motion Plus control with 15" SmartTouch

Leto izdelave: 2006, stanje: pripravljen za uporabo (rabljen), A CNC precision parallel lathe Pinacho is available. Center height: 180 mm, distance between centers: 750 mm–1000 mm, turning diameter over bed/cross slide/top slide: 360 mm/335 mm/198 mm, bed width: 250 mm, spindle bore: 42 mm, spindle speed: 4000 rpm, feed rate X/Z: 10 m/min, rapid traverse X/Z: 10 m/min. Tailstock quill diameter: 58 mm, tailstock quill travel: 200 mm, Morse taper: MT3, min. steady rest/follow rest passage: 10 mm, max. steady rest/follow rest passage: 70 mm/114 mm, control: Fanuc 0i. Documentation available. On-site inspection possible. Iijdpfx Alswftcvjied

Leto izdelave: 1996, stanje: pripravljen za uporabo (rabljen), Turning length: 450 mm, spindle bore: 65 mm, spindle speed: 4,000 rpm, main spindle/sub-spindle power: 18.5 kW/11 kW, tool stations: 10, driven tools: 10, hydraulic capacity: 150 l, hydraulic pressure: 60 bar, connected load: 39 kW. Rapid traverse X1/X2: 15 m/min, feed force: 5,000 N, feed travel: 140 mm. Rapid traverse Z1/Z2: 30 m/min, feed force: 8,000 N, feed travel: 450 mm. Rapid traverse Y1: 6 m/min, feed force: 8,000 N, feed travel: +/-35 mm. Machine dimensions X/Y/Z: approx. 4,150 mm/2,000 mm/1,800 mm, weight: approx. 4,750 kg, control: Traub System TX 8F, operating hours: 78,825 h. Documentation available. On-site inspection possible. Ijdpfjv Scrhox Alieid

Stanje: novo, Leto izdelave: 2026, Technical Specifications SWING OVER BED: 360 mm Iodpjf Ey Umefx Alioid SWING OVER CROSS SLIDE: 150 mm DISTANCE BETWEEN CENTERS: 750 mm SPINDLE SPEED: 100-2000 rpm SPINDLE BORE: 47 mm SPINDLE NOSE: MT5 NUMBER OF TOOLS: 8 TOOL SIZE: 20x20 mm TAILSTOCK TAPER: MT3 MAXIMUM TAILSTOCK QUILL TRAVEL: 100 mm MOTOR POWER: 3.7 kW DIMENSIONS: 1815 x 1300 x 1600 mm NET WEIGHT: 1300 kg Available Equipment - SINUMERIK 808D controller (Polish language) - SIEMENS servo drives - HYDRAULIC 3-jaw chuck - 8-position turret head - Set of soft jaws - Hydraulic tailstock - Coolant system - Automatic lubrication system for gears and guideways - 24V halogen lighting - Technical documentation manual (Polish) - CE declaration The listed price is NET. Transport costs are not included. For more information, please contact us by phone or email. Feel free to visit our website for the complete offer.