Stranski nakladalnik

Baumann GX 60L/12/45 ST

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2016, obratovalne ure: 18.793 h, nosilnost: 6.000 kg, dvižna višina: 4.500 mm, prosto dvigovanje: 650 mm, vrsta goriva: dizel, tip droga: simpleks, gradbena višina: 3.190 mm, širina nosilnega okvirja vilic: 1.330 mm, dolžina vilic: 1.190 mm, lastna masa: 9.430 kg, skupna dolžina: 4.800 mm, vrsta pogona: Diesel, gradbena širina: 2.000 mm, Sideloader Load center: 600 mm Ppodpfxeu Dy Emo Altsw Fork width: 200 mm Fork thickness: 50 mm Mast type: Standard Condition: Ready for operation and fully functional Technical condition: Very good Front tires type: Pneumatic Front tires size: 3.00-15 Rear tires type: Pneumatic Rear tires size: 3.00-15 Description: In addition to this Baumann model, we have around 200 heavy-duty forklifts, compact forklifts, standard forklifts, and sideloaders in stock at our warehouses in Hamburg and Gdansk. Visit our website - sago-online. Lease-purchase and financing on favorable terms are always possible with us. We are also happy to purchase your used equipment outright, even if you do not buy a vehicle from us. Our owner, Mr. Peter Sawitzki, will be happy to provide detailed advice on this GX60L/12/45St UK model. P.S.: Our master forklift workshop specializes in the repair, maintenance, overhaul, and custom construction of forklifts from 8 tonnes upwards. We are also happy to offer your vehicle for consignment sale at our premises. Heater, Full cabin, Platform height: 1,050 mm

Stanje: novo, Leto izdelave: 2024, dolžina gredi pod glavo: 80 mm, dolžina navoja: 55 mm, največja hitrost vožnje: 480 mm/min, Flat Die Thread Rolling Machine E.W. MENN GW63 Fully refurbished to as-new condition. Podpfx Alot Uucastopw New guides, vibrator, and vibratory discharge system. New electrical system with inverter and PLC. Thread size: M8x80/55 mm. Throughput: 480 pcs/min. Threading diameter (min./max.): 3 - 8 mm. Die length: 115/130 mm. Machine available for inspection and testing at HBR srl - Calolziocorte (LC).

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 9401, Leto izdelave: 2017, obratovalne ure: 7.574 h, nosilnost: 6.000 kg, dvižna višina: 4.500 mm, prosto dvigovanje: 695 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 3.240 mm, moč: 70 kW (95,17 KM), širina nosilnega okvirja vilic: 1.520 mm, dolžina vilic: 1.200 mm, lastna masa: 10.210 kg, skupna dolžina: 4.730 mm, vrsta pogona: Diesel, gradbena širina: 2.000 mm, Stranski viličar Številka šasije: 9401 Težišče tovora: 600 Širina vilic: 200 mm Debelina vilic: 50 mm ISO razred: ISO razred 4 = 5.000 - 10.000 kg Tip droga: Duplex Stanje: Obnovljeno z garancijo Tehnično stanje: dobro Tip sprednjih pnevmatik: zrak Velikost sprednjih pnevmatik: 300x15 Stanje sprednjih pnevmatik: 40 - 60 % Tip zadnjih pnevmatik: zrak Velikost zadnjih pnevmatik: 300x15 Podpjyhm H Eofx Altjpw Stanje zadnjih pnevmatik: 40 - 60 % Zadnja delovna luč, prednja delovna luč, ogrevanje, zaprta kabina, CE certifikat, joystick, Radio CD,

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 11579, obratovalne ure: 225 h, nosilnost: 6.000 kg, dvižna višina: 4.500 mm, prosto dvigovanje: 660 mm, vrsta goriva: dizel, tip droga: dupleks, gradbena višina: 3.190 mm, moč: 55 kW (74,78 KM), širina nosilnega okvirja vilic: 1.320 mm, dolžina vilic: 1.200 mm, skupna dolžina: 4.730 mm, vrsta pogona: Diesel, gradbena širina: 2.000 mm, Stranski viličar Številka šasije: 11579 Pedpfxex Ekx Uj Altepw Težišče tovora: 600 Širina vilic: 200 mm Debelina vilic: 50 mm Tip droga: Duplex Stanje: Kot novo Tehnično stanje: Novo Vrsta prednjih pnevmatik: zračnice Stanje prednjih pnevmatik: nove Vrsta zadnjih pnevmatik: zračnice Stanje zadnjih pnevmatik: nove Opis: Demo stroj, na voljo takoj! Cena brez stroškov prevoza iz tovarne. Ogrevanje, polna kabina, CE certifikat, notranje ogledalo, joystick, LED, Prečni cilindrični izvlečni sistem, 4 nosilci za tovor 1800 mm, BEGE udoben sedež, Baumann rumena barva

Leto izdelave: 2014, stanje: potreben popravila (rabljeno), Funkcionalnost: popolnoma funkcionalen, The machine has been out of use for several years and therefore requires maintenance before being put into operation, which will be the responsibility of the buyer. Ppodpfx Astu U Ebsltew

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, največja višina reza: 145 mm, največja širina rezanja: 510 mm, skupna masa: 400 kg, premer ekstrakcijske šobe: 150 mm, vrtljajska hitrost (min.): 2.800 obr/min, moč: 5,5 kW (7,48 KM), STROMAB PS 50/F Crosscut Swing Saw - Brand NEW Specification: • Condition: New • Motor power: 5.5 kW • Blade diameter: 500 mm • Motor shaft diameter: 30 mm • Motor speed: 2,800 rpm • Max. cutting width: 510 mm • Max. cutting height: 145 mm • Additional extension tables: 2 x 2 m • Weight: 400 kg • Year of manufacture: 2024/2025 • Noise emission: 85.5 dB(A) • CE compliant Additional information: Pedpfx Alordwm Tjtepw • The tables shown in the pictures are included with the machine (2 x 2.0 m) • Available within 7–10 working days • Price does not include VAT or transport costs

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, pritisk: 16 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 400 °C, vhodna napetost: 6.000 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: zrak, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Due to a revision of long-term industrial strategy, an industrial Howden KK&K TWIN CA46 steam turbogenerator, complete according to original OEM supply, is available for sale. The unit is BRAND NEW, entirely manufactured and tested at OEM level, but has never been installed or put into service. It remains covered by the manufacturer’s warranty and is stored in a closed, controlled environment. Immediate availability eliminates the standard lead time, which for this class of equipment is typically 24–36 months. Main scope of supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Key design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Rated speed: 1,500 rpm Electrical generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, ready for grid-parallel operation Included systems: - Integrated base-mounted oil system - Main mechanical oil pump and auxiliary electric pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy facilities - Combined generation of electric power and process steam Condition and status: - Condition: NEW - Manufacturing year: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning possible with OEM support Possible application fields: - Biomass and waste-to-energy plants for the production of electric power and process steam, with immediate unit availability and no multi-year production lead times - Industrial cogeneration (CHP) in facilities with continuous process steam consumption (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a rapid alternative to new OEM units with 24–36 month lead times Price: on request. Further technical details and documentation available upon request. Ppodpfxsyidvdj Altsw

Stanje: dober (rabljeno), Manufacturer: CLEARING Model: S4-900-180 Condition: Used Inventory number: Cod.0274 Press force: 900 ton Number of rams: 4 plungers Slide stroke: 940 mm Slide adjustment: 762 mm Strokes per minute: 16 Die height at BDC: 1,412 mm Slide dimensions: 4,572 mm x 2,438 mm Ppodpjtzy R Njfx Altsw Bolster dimensions: 4,572 mm x 2,130 mm Removable bolster: Yes Clearance (front): 4,622 mm Side opening in frame: 1,400 mm Hydraulic safety: Yes Cushion in bed: Yes Lower blankholder stroke: 280 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.000 mm, dolžina podajanja os X: 1.650 mm, dolžina pomika po osi Y: 1.000 mm, pomik po osi Z: 360 mm, največja hitrost vretena: 4.200 obr/min, premer vrtanja: 40 mm, hitro pomikanje X-os: 10 m/min, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 10 m/min, moč vretenovega motorja: 10.000 W, dolžina mize: 700 mm, širina mize: 1.400 mm, obremenitev mize: 4.000 kg, dolžina pomika os W: 500 mm, Selca S4040D CNC Control Drilling depth, transverse V-axis travel: 1,000 mm Column, longitudinal X-axis travel: 1,650 mm Drilling slide, vertical Y-axis travel: 1,000 mm Drilling slide, workpiece support W-axis travel: 500 mm Drilling slide, vertical 'swivel' max – A-axis degrees: +20° / -20° Rapid traverse, adjustable speed max: 10,000 mm/min Drilling diameter (solid material) min/max: 5 - 40 mm Drilling spindle, rotation, adjustable speed: 1 - 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Clamping slots, standard type: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill shank; shank for drills > 6: 10 x 40 mm Ppjdpfsxpwf Tox Altsw Gun drill shank; shank for drills < 6: 25 x 70 mm Rotary & "BARRASENO" CLAMPING TABLE, B AXIS Dimensions: 800 x 1000 mm Clamping slots, standard type: 18 mm Maximum axial load (rotary): 4,000 kg Continuous radial resolution B-axis: 360,000 div/rev Maximum vertical resolution of "BARRASENO" – B1 axis: +20° / -20° Small milling/threading head etc. Maximum horizontal Z-axis stroke (830): 360 mm Spindle rotation, adjustable speed max: 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: SA/005006, WIDE BELT SANDER/THICKNESSER WITH 3 BELTS DMC MOD. USK1350 M3 - CE COMPLIANT - USED - 1 steel roller - 2 rubber rollers - 3 rubber rollers - 3 independent motors - Working width: 1350 mm - Equipped with pad system (short piece device) - Air blower on the third unit - On/off device on each sanding unit - Touch screen control - Serial no. SA/005006 Ppsdpfswrnmpex Altew - Year: 2004 - CE compliant