Stroj za brizganje

Battenfeld BA 1600/BA 500-200 CDK

Leto izdelave: 2013, Stanje: pripravljen za uporabo (rabljen), A Boy injection moulding machine is available. Clamping force: 100 kN, tie bar distance (diagonal): 205 mm, max. platen opening: 250 mm, ejector stroke: 50 mm, screw diameter: 14 mm, shot volume range: 1 cm³ / 15.3 cm³, machine dimensions L/W/H: approx. 1500 mm / 550 mm / 1400 mm, weight: approx. 500 kg, control system: Procan ALPHA. Documentation available. Inspection on site possible. Crodpfov Ext Iox Afqek

Stanje: rabljeno, Leto izdelave: 2001, vpenjalna sila: 60 kN, delovna prostornina: 224 cm³, tlak vbrizgavanja: 2.224 letvica, skupna masa: 3.350 kg, delovne ure: 60.790 h, premer polžastega transporterja: 18 mm, Minimum mold installation height: 15 mm_Maximum platen clearance: 575+ mm Payment terms: 100% prior to machine handover, net Manufacturer: Battenfeld Model: BA600-50CDC Condition: Refurbished Operating hours: 60,790 CLAMPING UNIT: Clamping force: 60 t Credpfx Afjh Tk Rvoqek Opening stroke: 425 mm Minimum mold installation height: 350 mm Maximum mold installation height: - Tie bar distance (h x v): 320 x 320 mm Platen dimensions (h x v): 490 x 490 mm Centering rings (nozzle/ejector plate): 125 / 125 mm INJECTION UNIT: IU50 Screw diameter: 18 mm Shot weight in polystyrene: 20.4 g Stroke volume: 22.4 cm³ Injection pressure: 2,224 bar CONTROL: Unilog 4B Display languages: DE Operating manual: DE EQUIPMENT: Core pulls: Yes Air valves: - Hot runner zones: - Robot interface: Euromap 12 GENERAL DATA: Installed heating capacity: 3.6 kW Pump motor power: 11.0 kW Total connected load: Motor + heating Total weight: 3,350 kg Overall dimensions (L x W x H): 4.0 x 1.5 x 2.1 m

Stanje: zelo dobro (rabljeno), Leto izdelave: 2003, Battenfeld 1300/350 Year of manufacture: 2003 Clamping force: 130 tons Screw diameter: 40 mm Operating hours: 77,890 h Crodsd Tnbhspfx Afqok Tie bar distance: 420 x 420 mm

Stanje: dober (rabljeno), Leto izdelave: 1998, Battenfeld 600/200 CDC Unilog 4000 Clamping force: 60 tons Year of manufacture: 1997 Screw diameter: 30 mm Shot weight: approx. 90 g Credsg Emvhopfx Afqjk

Stanje: rabljeno, Leto izdelave: 2008, vpenjalna sila: 160 kN, delovna prostornina: 251 cm³, tlak vbrizgavanja: 2.500 letvica, skupna masa: 8.200 kg, delovne ure: 37.200 h, premer polžastega transporterja: 40 mm, Dobavni pogoji: FCA Pegnitz Dobavni rok: po dogovoru Plačilni pogoji: 100 % plačilo pred prevzemom stroja, čisti neto Crjdpfx Afswd Udlsqsk

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, BATTENFELD HM 60/350 S Injection Moulding Machine Year of manufacture: 2008 Injection unit: - Screw diameter: 35 mm - Shot weight: 153.8 g - Injection pressure: 2083 bar - Injection volume: 169 ccm Codpfjk Rnq Njx Afqsrk Clamping unit: - Clamping force: 60 t - Tie bar clearance: 370x320 mm - Maximum platen dimensions: 550x530 mm Ejector: hydraulic Clamping system: hydraulic Control unit: UNILOG B6 Additional equipment: - Machine in very good technical condition - Euromap 67 interface Dimensions: - Weight: 3100 kg - Length/Width/Height: 3.79x1.24x1.88 m Power supply: - Pump/Motor: 15 kW - Heaters: 10.4 kW - Total: 25.4 kW

Stanje: zelo dobro (rabljeno), Leto izdelave: 1992, Boy 30 T2 Schließkraft: 30 Tonnen Baujahr: 1992 Crodpsuh U Izjfx Afqjk Schnecke: 32 Schussgewicht: 123 g

Stanje: zelo dobro (rabljeno), Leto izdelave: 1993, Boy 50 T2 Clamping force: 50 tons Year of manufacture: 1993 Screw diameter: 38 mm Codpfjuiaa Ssx Afqerk Shot weight: 138 cm³

Leto izdelave: 2022, Stanje: pripravljen za uporabo (rabljen), An as-new injection moulding machine including robot is available. 1) Injection moulding machine Krauss Maffei, year of manufacture: 2022, clamping system: hydromechanical two-platen system. Plasticising capacity: 8100, screw diameter: 105mm, nozzle radius: 35mm, nozzle bore: 6mm, clamping force: 1,700t, controller: MC6. 2) Industrial robot KUKA IR 1200 R3100.2 F/K, max. payload: 120kg, reach: 3,100mm, repeatability: +/-0.05mm, controller: KR C5. Documentation available. On-site inspection possible. Codpfevpvlcox Afqerk

Stanje: dober (rabljeno), Leto izdelave: 2004, ENGEL DUO 4550/700 – Technical Specifications General Information: Machine Model: DUO 4550/700 Control System: CC100 Clamping Unit: Clamping Force: 7,000 kN Opening Force (with pressure pad): 510 kN Opening Stroke: 1,350 mm Minimum Mold Height: 450 mm Maximum Mold Height: 1,350 mm Daylight (Platen Open): 2,700 mm Platen Dimensions (H × V): 1,460 × 1,360 mm Tie Bar Spacing (H × V): 1,030 × 930 mm Max. Tool Weight: 9,000 kg Ejector Stroke: 300 mm Ejector Force: 90 kN Ejector Strokes (Euromap 6): 8 Dry Cycle Time (Euromap 6): 7.0 seconds Injection Unit: Screw Diameter: 90 mm L/D Ratio (Barrier): 24 Plasticizing Rate: 2,488 cm³/s Shot Volume: 2,860 cm³ Theoretical Shot Weight: 2,600 g Injection Flow Rate: 533 cm³/s Injection Pressure: 1,910 bar Crodpjv U Dn Nsfx Afqjk Specific Injection Pressure: 2,100 bar Nozzle Length: 185 mm Nozzle Contact Force: 65 kN Heating Capacity (Zone 7): 62 kW Pump Drive Power: 75 kW Oil Capacity: 1,000 liters Weight: Net Weight of Clamping Unit: 22 tons Net Weight of Injection Unit: 10 tons