Profilni valj

AYEL-TECH PK 40 230V

Stanje: novo, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, obratovalne ure: 44 h, nosilnost: 4.500 kg, dvižna višina: 17.000 mm, vrsta goriva: dizel, tip droga: teleskopski, moč: 85 kW (115,57 KM), lastna masa: 13.040 kg, vrsta pogona: Diesel, Rigid telescopic handler Mast type: Telescopic Itodpfxsw Eqc He Al Nef Speed class: 20 km/h Condition: New unit Technical condition: New Front tire type: Pneumatic Front tire size: 400/70-24 Front tire condition: 80-100% Rear tire type: Pneumatic Rear tire size: 400/70-24 Rear tire condition: 80-100% Third and fourth auxiliary hydraulic valve, heating, full cab, CE certificate, Telescopic handler model ICARUS 45.17 GD engine 2PL1107 ----- 1 x ICARUS 45.17 DYNAMIC ST.V IT, 1 x ICARUS 45.17 DYNAMIC - GD TÜV/DEKRA approval, 20 KM/H (Germany only), automatic 45% differential lock on the second axle, hydraulic single-lever control unit with proportional and simultaneous operation (Flow-Sharing), open-center hydraulic system, wheelset #400/70-24# Power CL Michelin with fenders, fixed Dieci tool carrier plate, boom suspension system (not compatible with basket pre-equipment), standard heating, air suspension seat, steering indicator light, radio pre-installation, cabin comfort kit (sunshade, rear storage net, dual USB socket), standard rear-view mirrors right and left, FNR lever under the steering wheel, reversing camera integrated in the machine display, LED headlight on boom head, two rear LED work lights on cab, LED work lights (1 right side, 1 left side, 1 rear), road headlights (front) with LED daytime running lights, rear-view mirror, 7-pin trailer socket, pair of floating forks 120 x 50 mm, length = 1200 mm, load capacity 5,000 kg.

Stanje: pripravljen za uporabo (rabljen), Einlauf für Rundholz mit Wurzelreduzierer und Entrindungsmaschine. Itjdpfotrd Hfsx Al Nef Folgende Komponenten sind enthalten: - Rundholz-Zuführtisch mit Vereinzelung und Sortierstation (Rundholzentschäler und Rundholzeinzugsförderer) - Wurzelreduzierer Typ Bruks RR1000 - Entrindungsmaschine Typ Cambio 70-66 - Auslauf-Förderband für Rundholz mit Holzabstoßer

Leto izdelave: 1998, stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Very sturdy roller conveyor with hydraulic lift and lower cross conveyor. Section 1: Length 7,100 mm. Roller length 2,000 mm. Roller diameter 220 mm. Construction height 1,000 mm. Integrated hydraulic lift and lower cross conveyor with 4 chain strands. Spacings: 1,500 - 1,300 - 1,000 mm. Completely sheet metal covered. Hydraulic supporting idler rollers. Driven by a geared motor. New bearings. Section 2: Length 7,200 mm. Roller length 1,600 mm. Conveyor length 6,100 mm. Built-in hydraulic lift and lower cross conveyor with 6 chain strands. Cantilevered design allows workpieces to be transferred under the roller conveyor to the left or right. Completely sheet metal covered. Including hydraulic power unit for both roller conveyors. Ijdpfx Ajt Hg Hujl Notf

Stanje: generalkompletno obnovljen (rabljeno), Popolnoma obnovljen napenjalni voziček Bongioanni CRL 4 s štirimi napenjalnimi čeljustmi. Tirna širina: 1200 mm Tirnice na novo frezane Itedpfoxtwxbjx Al Nef Servo-električni pogon Prodaja po naročilu stranke.

Stanje: dober (rabljeno), Leto izdelave: 1962, Rapid radial drilling machine, radial drilling machine, drilling machine, cantilever drilling machine, rapid-action radial drilling machine Ijdpfjirax Uox Al Nstf -Clamping table: 400 x 1100 mm -Arm reach: 930 mm -Taper: MT4 -Motor power: 1.35/1.8 kW -Spindle speeds: 41–1700 rpm -Column diameter: Ø 200 mm -Spindle stroke: 125 mm -Tapping device: YES -Feed: 0.075 – 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500 kg

Stanje: novo, Leto izdelave: 2024, številka stroja/vozila: 302340, Ring bending machine Manufacturer: KB, Turkey Model: MB 30 Lower shaft: 30 mm Upper shaft: 30 mm 2 driven rollers With base frame for horizontal and vertical operation Bending capacity: - Round tube up to 48 x 3.0 mm - Flat bar (upright) 50 x 10 mm - Square tube 40 x 40 x 3 mm Weight: 170 kg Itjdpfx Ajd S Uf Sjl Njf Motor: 0.75 kW, 400 Volt, 50 Hz, 3-phase.

Stanje: rabljeno, Leto izdelave: 1998, Cutting capacity at 90 degrees: round 250 mm Cutting capacity at 90 degrees: square 240 mm Cutting capacity at 90 degrees: rectangular Saw band length 2965 x 27 x 0.9 mm Isdpfx Alsu Sbpvj Nstf Table height mm Band speed 37 / 76 m/min Total power requirement 1.0 kW Machine weight approx. 0.38 t Space requirements approx. 1.0 x 1.6 x 1.4 m Double mitre band saw

Stanje: dober (rabljeno), Leto izdelave: 2001, Trennjaeger TEBA 240 DG Round capacity: 240 mm Rectangular capacity: 230 x 230 mm Motor: 1.5 kW Dimensions: 1,950 x 1,650 x 1,000 mm Mitre saw angles: 90° / -45° / +45° / +60° Itsdpfxju Ekw Nj Al Njf Cutting speed: 40 / 80 m/min.

Stanje: dober (rabljeno), Leto izdelave: 1994, 2-side planer, top and bottom Isdpfx Alshuthyo Netf constant table height (consistent infeed height) maximum planing width: 600 mm maximum planing height: 280 mm planerheads with strip knives immediately ready for operation

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, moč: 26,2 kW (35,62 KM), vrsta goriva: dizel, kapaciteta rezervoarja za gorivo: 35 l, barva: bron, skupna masa: 2.700 kg, dvižna moč: 1.500 kg/m, dvižna višina: 4.300 mm, velikost pnevmatike: 10.0/75-15.3, stanje pnevmatik: 90 odstotek, konfiguracija osi: 4x4, število sedežev: 1, emisijski razred: Euro 5, Leto izdelave: 2023, obratovalne ure: 151 h, Oprema: dodatne luči, kabina, nadzor oprijema, nizka raven hrupa, pogon na vsa štiri kolesa, vilice za palete, === TECHNICAL DATA === Year of manufacture: 2023 Operating hours: 151 h Max. lifting capacity: 1,500 kg Max. lift height: 4.30 m Max. reach: 2.62 m Drive: Diesel Transmission: Automatic (hydrostatic) All-wheel drive: Yes Steering modes: Front axle / all-wheel / crab steering Ijdpfx Aleyhar Is Notf Stabilizers: No Cabin: Enclosed (ROPS/FOPS Level 1) Heated cabin: No Fork length: Standard forks Tyres: Off-road tyres (CAMSO MPT 552 – 10.0/75-15.3) Engine manufacturer: Yanmar 3TNV88C-DMU Emission standard: Stage V (Tier 4 final) Weight: Transport weight 2,700 kg (min.) CE certification: Yes === HIGHLIGHTS === Carefully selected from a reliable source with verifiable history CE certification and complete documentation available Immediately operational and ready for transport Comprehensive technical documentation available === CONDITION === Very good working condition – fully inspected, serviced and tested by certified professionals. On-site inspection available on request. === LOCATION & PRICE === Location: Sittard, Netherlands. Worldwide delivery available. Price on request (EXW / plus VAT). Reliable machines from first hand with complete service history and professional technical support. Benefit from one of the largest European inventories of new and used machines. All machines are fully inspected, CE certified and ready for immediate use. Spare parts and technical support available on request. === TRANSPORT === Crane loading available on request for smooth transport. Flexible shipping options depending on destination and logistic requirements. All transport is professionally organised by the Collé Rental & Sales logistics team.