AXA DBZ

AXA DBZ

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, obratovalne ure: 65.155 h, potovalna razdalja osi X: 750 mm, pomik osi Y: 500 mm, pomik po osi Z: 600 mm, proizvajalec krmilnikov: HEIDENHAIN, model krmilnika: iTNC 530, širina mize: 500 mm, dolžina mize: 1.350 mm, obremenitev mize: 550 kg, skupna masa: 10.000 kg, največja hitrost vretena: 10.000 obr/min, število mest v zalogovniku orodij: 22, število osi: 4, This vertical 4-axis double machining center AXA DBZ was manufactured in 2007. It features an impressive X-axis travel of 2 x 750 mm, a Y-axis travel of 500 mm, and a Z-axis travel of 600 mm. The machine is equipped with a main spindle speed range of 30-10,000 rpm and a maximum table load capacity of approximately 550 kg. If you are looking for high-quality machining capabilities, you should consider the vertical machining center AXA DBZ that we are offering for sale. Please contact us for further details. Double machining center With 2x 4th axis RTA 1-180 Automatic doors (prepared for robotic handling systems) Main spindle speed range: 30–10,000 rpm Main spindle drive power: approx. 30 kW (40% duty cycle) Maximum torque: approx. 143 Nm Tool holder: SK 40 DIN 69871 / A Internal coolant supply (water – air) Table clamping surface: 2 x 1,350 x 500 mm Maximum table load: approx. 550 kg Number of T-slots: 3 T-slot width: 14H9 mm T-slot spacing: 160 mm 4th axis: 2 x RTA 1-180 Bdsdpfey Sg I Ejx Ag Ejd Number of tool positions: 22 Tool diameter: 85 mm Maximum tool diameter with adjacent station empty: 135 mm Maximum tool length: 400 mm Tool change time: 4.0 sec Rapid traverse X/Y: 25 m/min Rapid traverse Z: 20 m/min Feed force: 9 kN Total connected load: 55 kVA Machine weight: approx. 10.0 t Operating hours: 65,155 h Technical Specification: Through-spindle coolant: Yes

Stanje: zelo dobro (rabljeno), Leto izdelave: 2016, CMZ TA 20 TY-400 2016 : Bedpfx Agoyzduze Eedd ANNÉE : 2016 CNC : Fanuc 32i CARACTÉRISTIQUES PRINCIPALES : Diamètre de tournage sur banc : 760 mm Diamètre de tournage sur chariot : 600 mm Diamètre maximum usinable : 460 mm Longueur maximum usinable : 473 mm Mandrin : SMW Autoblok BHD 250 Passage de barre : 66 mm Course axe X : 310 mm Course axe Z : 400 mm Course axe Y : +70 / –50 mm Avance rapide X / Z / B : 30 m/min Avance rapide Y : 15 m/min Vitesse broche : 4 000 tr/min Puissance : 22 / 15 kW à 366 / 286 Nm Nez de broche : ASA 6 A2 Alésage broche : 73 mm Tourelle : 12 stations, toutes motorisées Vitesse maxi tourelle : 12 000 tr/min Puissance tourelle : 11,3 / 8,1 kW Couple maxi : 75 Nm Course contre-pointe : 400 mm Dimensions machine : 2 542 x 1 760 x 2 120 mm Poids : 7 500 kg ÉQUIPEMENTS : - Mandrin SMW Autoblok BHD 250 - Prérégleur d’outils - Servomoteur pour la contre-pointe - Ensemble de porte-outils dont 2 motorisés - Convoyeur à copeaux ÉTAT DE LA MACHINE : Machine en très bon état. 100% opérationnelle. Visible en fonctionnement.

Stanje: dober (rabljeno), Leto izdelave: 2012, AXA DBZ 2/50 double-station machining center, Bdodpfx Aeridf Ueg Ejd Year of manufacture: 2012, Control: Siemens 840, Travel (X/Y/Z): 2 x 800/600/600 mm, 16-position tool changer, Tool holder: SK 50, Spindle speed up to 4,000 rpm, Milling spindle – hollow shaft motor, water-cooled, Direct measuring systems, Chip conveyor, Control cabinet heat exchanger, Oil mist lubrication, Rittal cooling unit,

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 750 mm, pomik osi Y: 500 mm, pomik po osi Z: 600 mm, model krmilnika: Heidenhain iTC530, največja hitrost vrtenja: 12.000 obr/min, TEHNIČNE PODROBNOSTI Pomik osi X: 2 x 750 mm Pomik osi Y: 500 mm Pomik osi Z: 600 mm Hitri pomik v smeri X/Y: 25 m/min Hitri pomik v smeri Z: 20 m/min Podajalna sila: 9 kN Obratovalno območje: 30-12.000 vrt/min Menjalec orodij: 22-kratni Vpenjanje orodja: SK40 Maks. dolžina orodja: 400 mm Maks. premer orodja: 85 mm (135 mm pri prosti sosednji postaji) Čas menjave orodja: 4,0 s Vpenjalna površina mize: 2 x 1.350 mm x 500 mm Maks. nosilnost mize: 550 kg PODROBNOSTI STROJA Krmilni model: Heidenhain iTC530 Pogonska moč: 30/20 kW Skupna poraba moči: 55 kVA Dimenzije in teža Dimenzije (D x Š x V): 6,0 x 3,5 x 3,5 m Teža stroja: 10.000 kg OPREMA Bsdpfx Ageymz D No Eodd Notranje hlajenje Hladilni sistem s papirnatim trakom Dokumentacija

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2007, potovalna razdalja osi X: 4.600 mm, pomik osi Y: 1.935 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis Biesse Rover C9.50 was manufactured in 2007. It offers a large working area (X=4600 mm, Y=1935 mm, Z=275 mm), an automatic lubrication system, and a control unit for 5-axis interpolation. The machine is equipped with a vacuum system, a conveyor belt for chip extraction, and liquid cooling. If you are looking for high-quality CNC machining capabilities, you should consider the Biesse Rover C9.50 that we have for sale. Contact us for more information. Work Table and Clamping • 8 ATS panel holders (L = 1525 mm) and 24 sliding rails • Automatic positioning of panel holders and sliding rails (EPS X-Y) • Pneumatic locking system, divided into 2 working areas in X • 8 rear reference stops, stroke 115 mm • 8 stops, stroke 140 mm, positioned at 1175 mm (L = 1280 / 1525 / 1800 mm) • 8 stops, stroke 140 mm, positioned at 770 mm (L = 1280 / 1525 / 1800 mm) • 4 side stops, stroke 140 mm (2 left + 2 right) with pneumatic system • 4 removable middle stops, stroke 140 mm (2 left + 2 right) with pneumatic system • Sensor for detecting lowered stops • Pneumatic system for lifting bar holders • 6 lifting bar holders for easy loading (H = 74 mm modules) Vacuum • Vacuum system for a 250 m3/h pump • 250 m3/h rotary vane vacuum pump for the standard vacuum system Machining Units and Configuration • C3-A1 composition: • Device for mounting chip deflectors with pneumatic or inductive sensors on a 5-axis machining unit • Flange for mounting units on a working unit with 5 interpolating axes (units only usable when the electric spindle is vertical) • C3-P2 composition: • Additional Z-carriage for rear machining units, controlled by an independent Z-axis • 16 vertical and 4 horizontal drilling spindles in Y-direction Bdedpfox D H Hcjx Ag Eed • Chain tool changer with 22 positions (180 mm center distance) • Iron gripper for chip deflector with pneumatic or inductive sensor, located in the chain tool changer • RH chip deflector with inductive sensor for standard electric spindle or 15 kW 5-axis electric spindle (requires device for chip deflector; requires flange for mounting units when using a 5-axis electric spindle; requires C-axis when using a standard electric spindle) Systems • Automatic lubrication system • Control unit with 5 interpolating axes Additional Equipment • Additional overhauled 5-axis main spindle available • Conveyor belt for chips and scrap (chip conveyor) • Liquid cooling unit for liquid-cooled systems (can cool two electric spindles or one electric spindle plus a liquid-cooled drilling head) Note: The technical specifications and descriptions are taken from the original order confirmation and are for informational purposes only; they are not binding.

Leto izdelave: 2012, stanje: pripravljen za uporabo (rabljen), Travel path X/Y/Z: 2x 800mm/600mm/600mm, spindle speed: 4000 rpm, table to spindle nose distance: 180mm-780mm, max. tool diameter/length: 85mm/135mm, rapid traverse X/Y/Z: 25m/25m/20m/min, feed force: 9000N, ground clamping surface: 2x 1000mm/500mm. Dimensions X/Y/Z: approx. 6600mm/3000mm/3200mm, weight: approx. 18,000kg. Documentation available. Bodpetyymcsfx Ag Eodd

Stanje: rabljeno, Leto izdelave: 1999, x-hod 4000 mm y-hod 1000 mm z-hod 1500 mm Krmilnik Heidenhain 355 Bsdpfoxzuz Nox Ag Esdd Nosilnost 10 t Glava SK50 da Dodatne slike / video na voljo

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 20194, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, moč: 49 kW (66,62 KM), Značilnosti Visoka togost za težko obdelavo Velika miza za nadstandardne obdelovance CNC krmiljenje HEIDENHAIN TNC 530 za precizne operacije Avtomatski menjalec orodij s 50 pozicijami Centraliziran sistem mazanja in hidravlike Bedpfjx S Hgzsx Ag Ejdd

Stanje: dober (rabljeno), Leto izdelave: 2006, potovalna razdalja osi X: 2.500 mm, pomik osi Y: 1.250 mm, pomik po osi Z: 1.000 mm, Travels Longitudinal (X): 2500 mm Vertical (Y): 1250 mm Transversal (Z): 1000 mm Table size (rotary): Length: 1000 mm Bdodpfx Aoykbxzjg Eod Width: 1000 mm Max. table load: 5000 kg T-slots: 6 x 22 mm H10 Drive power: 100% duty cycle, 24 kW Tool holder: ISO 50, DIN 69871 - AD Spindle speeds: 20 – 4000 rpm Torque: 479 Nm Feed range X, Y, Z axes: 10 – 10000 mm/min Rapid traverse X, Y, Z: 25000 mm/min Machine weight: approx. 15000 kg Equipment: - Internal coolant supply according to DIN 69871 Form AD including minimum quantity oil lubrication with 15 different dosing levels activated by M functions (programmable): 20 bar - NC rotary table, size 1000 x 1000 mm as 4th axis integrated into machine control. Max. workpiece load 5000 kg, positioning accuracy ± 5", table surface with 22 T-slots - Chip conveyor for TA-D 25 - Tool changer Accessories - Front-positioned, movable operator panel with Heidenhain iTNC 530 control (single processor) - Portable electronic handwheel HR 420 with 3 m spiral cable (option) - 3D thermal expansion compensation - Automatically indexing milling head / 2 planes, 2.5° increments (H200) (option) - Distance from spindle nose to table edge: 250 mm - NC rotary table, size 1000 x 1000 mm, as 4th axis integrated into machine control. Max. workpiece load 5000 kg, positioning accuracy ± 5", table surface with 22 T-slots. - Coolant system with 150 l tank capacity, pump pressure 5 bar, delivery rate 50 l/min, outlet via ring nozzle around machine spindle - Fully enclosed splash guard cabin with sliding doors at the front, additional sliding door on the left column side, and viewing windows on all 4 sides - Heidenhain drive motors on all axes with digital drive technology - INA linear roller guide system on all axes - Direct linear measuring system by Heidenhain on all axes - Telescopic covers on X-axis guides - Precision ball screws on X, Y and Z axes - Automatic cycle lubrication for all axes and moving components - Electrical equipment by Siemens - Hydraulic unit by Vickers

Stanje: zelo dobro (rabljeno), Leto izdelave: 2010, obratovalne ure: 6.848 h, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 4.000 mm, pomik osi Y: 1.200 mm, pomik po osi Z: 1.500 mm, največja hitrost vretena: 3.000 obr/min, hitrost vretena (min.): 20 obr/min, vrtljajska hitrost (min.): 3.000 obr/min, skupna masa: 21.600 kg, moč: 28 kW (38,07 KM), Machine-outil CNC à banc, LAGUN GBM 42 avec iTNC530 ; Année : 2010 - Course X : 4000 mm - Course Y : 1200 mm - Course Z : 1500 mm - Dimension de la table : 4200 x 1000 mm - Plage de vitesse : 20 - 3000 tr/min, 34,5/28 kW - Cône de broche : SK 50 DIN69871A - Arrosage centralisé 24 bar - Air de soufflage à travers la broche - Changeur d’outils : 24 positions - Règles linéaires sur les 3 axes Bedpey Iduujfx Ag Eedd - Commande : Heidenhain TNC530i - Heures sous tension : 25 474 h - Fonctionnement automatique : 6 848 h - Poignée électronique : Heidenhain HR410 - Convoyeur à copeaux - Tête de fraisage automatique sur 2 axes, réglable par pas de 2,5° - Entraînements numériques Heidenhain avec moteurs Siemens - Boîte de vitesses ZF automatique à 2 rapports - Règles linéaires Heidenhain sur les trois axes avec système de surpression - Pression du liquide de coupe réglable sur 4 niveaux via la fonction M, air comprimé possible à travers la broche - Armoire électrique avec refroidissement actif - Puissance totale : 28 kW - Poids de la machine : 21 600 kg - Encombrement (L x P x H) : 10 x 6 x 3,8 m - Fonctionnement en une équipe - État : très bon