Vertikalni obdelovalni center

AWEA BM1100

Stanje: pripravljen za uporabo (rabljen), Sertom brand hydraulic plate rolling machine, length 25,000 mm with loading feed, 2 lower rolls of 300 mm, upper roll of 318 mm, plate thickness capacity 14 mm. 22 kW for rotation, 5.5 kW for movements, 2.5 kW for support structure. Dimensions: 600x190x210(h) cm. Weight: 15,500 kg. Hfodpfxsnr Npyj Af Tsb

Stanje: dober (rabljeno), Leto izdelave: 1994, CNC stroj za spiralno savijanje, kapacitet 50 cm³, minimalni-maksimalni promjer spirale 500-3.500 mm. Hsdpfx Afjiu Acpj Tjfb

Stanje: dober (rabljeno), Leto izdelave: 1992, Automatic Band Saw, Manufacturer: JAESPA, Type: W400 AZ Control: Minipos 807, Year of manufacture: 1992 Cutting diameter for round material: max. 400 mm Saw blade dimensions: 5500 x 32 x 1.1 mm Hsdpfx Afsgf H Saj Tefb Automatic feed, minimum cut-off length: 20 mm Chip conveyor Total power requirement: 4 kW Weight: approx. 2,500 kg Accessories: 2 x saw blades, roller conveyor (6 m, motorized drive), machine documentation available Space requirements: 2.8 x 2.8 x 2 m

Stanje: dober (rabljeno), Leto izdelave: 2000, obratovalne ure: 10.000 h, Funkcionalnost: popolnoma funkcionalen, stružna dolžina: 1.105 mm, premer struženja: 610 mm, največja hitrost vretena: 3.500 obr/min, izvrtina vretena: 70 mm, potovalna razdalja osi X: 580 mm, pomik osi Y: 210 mm, pomik po osi Z: 1.137 mm, montažni premer: 63 mm, največja hitrost vrtenja: 6.000 obr/min, vrsta vhodnega toka: Klimatska naprava, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, The machine is in good condition. Hfedpfx Afexp Hmas Tsb Major maintenance work in recent years: - 30.04.2020 Spindle overhaul CHF 35,000 - 16.07.2021 Software update (Wenk AG) CHF 1,600 - 20.06.2022 Central lubrication pump replaced CHF 400 (All prices are in CHF) Known defects: - Error message during startup - Coolant leaks out at the rear side of the milling spindle when internal cooling is activated - Overload message when the machine is cold and running at 100% rapid traverse - Over 150 various tool holders - Spare bushings for tool magazine - Spare limit switches for tool changer position monitoring - 2 pcs 3-jaw chucks, diameter 250 mm (installed during inspection) - 1 pc 3-jaw chuck, diameter 250 mm - 1 pc 3-jaw chuck, diameter 300 mm - 1 pc 4-jaw chuck, diameter 400 mm - 2 sets of hard jaws for external clamping, short version - 1 set of hard jaws for external clamping, long version - Several sets of used soft jaws - Spare filters for high-pressure system Kowap (5 pcs in stock, approx. 2 available at delivery—1 filter approx. CHF 20–25) - Coolant purification system or oil separator (custom-built) - Cabinet adapted to the tool magazine for KM63 holders, numbered with 80 slots - Specific clamping devices suitable for KM63 holders, providing direct clamping for indexable inserts - Iscar slot cutter suitable for a holder, D160 mm, width 4 mm - Gear milling cutter suitable for a holder (custom-built, for soft jaws p=1.5 mm) - Cleaning/deburring brush suitable for a holder We are happy to provide you with leasing and financing options for the machine. A viewing appointment can be arranged by mutual agreement.

Stanje: rabljeno, Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 124, Cena na upit Polovna CNC vertikalna strug mašina Proizvođač: MORI SEIKI Model: VL 55 Godina proizvodnje: 2001 Sa CNC upravljanjem MSC 518, revolverskom glavom za 12 alata i transportnim sistemom za strugotinu Maks. dužina obrade = 653 mm Maks. prečnik obrade = 550 mm Hfodpfx Afowl An Is Tsb X osa = 350 mm Z osa = 660 mm Broj obrtaja do = 2000 o/min Snaga vretena = 30 kW Težina cca = 12,5 t

Stanje: zelo dobro (rabljeno), Leto izdelave: 1999, Funkcionalnost: popolnoma funkcionalen, Machining Centre - Vertical / Manufacturer: DECKEL MAHO / Model: DMC 63V / Year of Manufacture: 1999 The machine can be inspected under power and cutting, by appointment. Well-maintained, very good condition, fully functional. Spindle replacement: 18.03.2022 Spindle hours (as of 13.03.2025): 51,206 h The machine is equipped with a Lehmann A-axis and counter bearing (as new). TECHNICAL DATA: Working area: - X-axis: 630 mm - Y-axis: 500 mm - Z-axis: 500 mm Feed drives: - Feed force X, Y, Z (100% duty cycle): 6,000 N - Feed rate: 0 - 30,000 mm/min - Rapid traverse X, Y, Z: 30 m/min - Ball screw diameter/pitch (X, Y, Z): 40/20 mm Positioning accuracy: - Pmax in X, Y, Z axis according to VDI/DGQ 3441: 0.015/0.010 mm (indirect/direct measuring system) Measuring system: - Input increment: 0.001 mm Work spindle: - Drive power (40/100% duty cycle): 13/9 kW - Torque (40/100% duty cycle): 83/57 Nm - Speed range: 1 - 10,000 rpm - Tool holder DIN 69 871-A: SK40 - Tool clamping force: 12,000 N Tool magazine / changer: - Tool change system: Pick-up - Number of magazine positions: 24 positions - Max. tool diameter with free adjacent positions: 80/140 mm - Max. tool length: 300 mm - Max. tool weight: 7 kg - Chip-to-chip time: 6.5 sec - Magazine rotation speed: 47 rpm - Max. load capacity of tool magazine (24 x 3 kg): 72 kg Machine table: - Clamping area with T-slots DIN 650-14: 800 x 500 mm - Table load (setup weight): 500 kg Hfodpfjv Nxbyex Af Tsb - Loading height: 850 mm - Max. workpiece height (with max. tool length): 240 mm EQUIPMENT: - CNC control: Siemens 810D powerline - Lehmann A-axis and counter bearing (as new) - Direct measuring system - ICS, 15 bar - Coolant system (emulsion) - Electronic handwheel - Chip conveyor - Documentation - CE marking No guarantee for completeness and accuracy of the technical data and equipment. - Subject to prior sale -

Stanje: rabljeno, Leto izdelave: 2006, X-travel: 600 mm Y-travel: 400 mm Z-travel: 400 mm Control: MSX 501 Mori Seiki Table clamping surface: 700 x 450 mm Max. table load: 350 kg Number of T-slots: 4 T-slot width: 18 mm T-slot spacing: 100 mm Spindle speed: 12,000 rpm Main spindle drive power: 18.5 / 15 / 11 kW Tool holder: BT 40 Max. torque: 110.5 Nm Front milling spindle bearing diameter: 70 mm Rapid traverse (X/Y/Z): 20,000 mm/min Feed rate: 1 - 20,000 mm/min Fine feed rate: 15 steps / 0 - 1,260 mm/min Number of magazine positions: 40 Max. tool width: 80 mm Max. tool diameter with free adjacent box: 125 mm Max. tool length: 250 mm Max. tool weight: 8 kg Tool change time (chip-to-chip): 2.8 sec Tool change time (tool-to-tool): 1.0 sec Total power requirement: 34 kVA Machine weight approx.: 7.2 t Space requirements approx.: 2.8 x 3.0 x 2.9 m Vertical machining center MORI SEIKI - NV 4000 DCG - approx. 14,000 operating hours Hfjdpfx Afjv Az Ucj Teb

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 1.500 mm, pomik osi Y: 700 mm, pomik po osi Z: 610 mm, nazivna (navidezna) moč: 37 kVA, vrtilni moment: 236 Nm, proizvajalec krmilnikov: Heidenhain iTNC530, model krmilnika: iTNC530, širina mize: 700 mm, dolžina mize: 1.700 mm, obremenitev mize: 700 kg, največja hitrost vrtenja: 12.000 obr/min, skupna masa: 9.000 kg, največja hitrost vretena: 12.000 obr/min, delovne ure vretena: 16.580 h, moč vretenovega motorja: 37 W, število vreten: 1, število mest v zalogovniku orodij: 48, Oprema: dokumentacija / priročnik, transportni trak za ostružke, 3-axis CNC machining center, Heidenhain iTNC530 X-axis travel: 1500 mm Y-axis travel: 700 mm Z-axis travel: 610 mm Table size: 1700 x 700 mm Tool holder: SK40 Tool magazine: 48 positions Rapid traverse: 36 m/min Hedpfx Ajvz Tyuof Tefb Table load capacity: 700 kg Through spindle coolant: 20 bar Chip conveyor Manual pulse generator (handwheel)

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, potovalna razdalja osi X: 2.400 mm, pomik osi Y: 2.850 mm, pomik po osi Z: 1.000 mm, dolžina podajanja os X: 20.000 mm, dolžina pomika po osi Y: 30.000 mm, dolžina podajanja os Z: 20.000 mm, Droop & Rein Modimill, year of manufacture 2001, Fidia C20 Hodpsvk Ubxofx Af Tjfb

Stanje: zelo dobro (rabljeno), Novo 2008 Premer nad posteljo – 600 mm (Ø 23,62") Premer × dolžina obdelovanca – Ø 300 × 600 mm (Ø 11,81 × 23,62") Maks. premer obdelovanca – Ø 380 mm (Ø 14,96") Maks. hod osi Z/X – 600 / 240 mm (23,62 / 9,44") Z-os: FANUC 2,8 kW (4 KM) / 3000 vrt/min X-os: FANUC 2,8 kW (4 KM) / 3000 vrt/min Premer vretena/premer vlečne cevi – STD: Ø 77 / Ø 52 mm (Ø 3,03 / Ø 2,04") OPT: Ø 86 / Ø 77 mm (Ø 3,38 / Ø 3,03") Hitrost vretena – STD: 8'' vpenjalna glava 3500 vrt/min OPT: 8'' vpenjalna glava 4500 vrt/min, 10'' vpenjalna glava 3500 vrt/min Premer vpenjalne glave – STD: Ø 8'' ; OPT: Ø 10'' Hidravlična konjiček – hod 465 mm (18,3") MT št. 4 Hfsdpfjrfx Tnsx Af Teb VDI orodni postaji – OPT: 8; STD: 10 Hladilna tekočina Transportni trak za odrezke Priključna moč – 208–220 V / 100 A / 3 faze / 60 Hz Tloris (D × Š × V) – 4080 × 1675 × 1842 mm (160,62 × 65,94 × 72,51") Bruto teža (približno) – 5200 kg (11.440 lbs)