Drugi viličarji in industrijski tovornjaki

Ausa C351 Hx4

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2024, nosilnost: 3.500 kg, vrsta goriva: dizel, lastna masa: 5.416 kg, skupna dolžina: 4.540 mm, vrsta pogona: Diesel, Tip maste: Noben Tehnično stanje: Novo Tip sprednjih pnevmatik: Zračne Velikost sprednjih pnevmatik: 16/70-20 Gjdpfxjvcf Umj Af Seir Tip zadnjih pnevmatik: Zračne Velikost zadnjih pnevmatik: 12-16,5 CE certifikat, STANDARDNA OPREMA • Nagibna voznikova kabina s pomočjo za nagibanje • Varnostni pas s senzorjem nadzora • Akustično opozorilo za vzvratno vožnjo • Gumb za izklop v sili • Utripajoča opozorilna luč • Hill Holder – pomoč pri speljevanju v klanec • Negativna zavora • Vzvratna ogledala • Volan nastavljiv po nagibu in globini • Joystick za upravljanje vseh glavnih funkcij • Naslon za roko • Inch pedal • ECO mode sistem • Digitalni zaslon • Dieselski filter z ločevalnikom vode VILIČARSKI VILI • Vilice 1.200 mm • Nosilna plošča vilic 1.260 mm tip FEM III • Integrirani bočni pomik

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 001645U, For sale Used Abus single-girder overhead crane approx. 19,500 mm x 5,000 kg. * Stored in dry conditions * Technically in perfect working order and inspected All our new and used cranes that are installed by us are supplied including warranty! We can supply our offered cranes optionally including: * Modification of span and/or height and, if desired, new painting * Power rails / long-travel power supply * Radio remote control * Tandem control * Installation and inspection At Jan Reiling B.V. you can also obtain: * New hoisting systems * Spare parts for your hoisting equipment * Slewing cranes * KBK X/Y systems * Chain hoists * Wire rope hoists * Service and maintenance * Inspection of your lifting equipment Gijdsygrivepfx Af Sor In addition, we have our own stock of approx. 15,000 Demag spare parts. For more information, see the website of Jan Reiling B.V. Cranes, crane, overhead crane, workshop crane, warehouse crane, hoist, krane, hall cranes, bridge cranes, workshop cranes, warehouse cranes, lifting equipment, cranes, universal crane, hoist. Overhead crane, laufkrane, overhead crane. Single girder, einträger, single girder. Chain hoist, kettenzüge, chain hoists.

Leto izdelave: 1987, stanje: zelo dobro (rabljeno), 1 piece Chemical Standard Centrifugal Pump with very low operating hours. The pump is suitable for sour condensate and aggressive acids. Also suitable for saltwater!! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Delivery head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of manufacture: 1987 Pump speed of 1480 rpm is also possible!! Performance approx. at 1480 rpm (specification without guarantee): Flow rate: 430 m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and pipework in stainless steel are also available. Material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and conveying - Flue gas desulphurization plants Giodpfx Ajh S Nz Sef Ssr - Acidic, chloride-containing wash slurries - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2012, Funkcionalnost: popolnoma funkcionalen, skupna masa: 1.154 kg, nosilnost: 210 kg, doseg roke: 3.095 mm, We offer industrial robots from the manufacturer KUKA. The scope of delivery includes the robot arm, control cabinet, and the corresponding cables. The robots come from a fully functional system and have been professionally dismantled. We conduct a functionality test and inspect the robots. If you are interested, we also offer the option of demonstrating the robots’ functions to ensure they meet your requirements. A 14-day return policy is granted for this offer. Any further warranty or guarantee is excluded. - Optional for an additional charge - Giodpforlmqkjx Af Ssr We are pleased to offer a new feature for our robots: the Siemens S7-1200 Profisafe safety controller. With this controller, you can easily integrate an emergency-stop function, safety gate, and start-stop interface via the Profisafe bus. The controller is fully commissioned and programmed, allowing you to implement a cost-effective standalone solution with one robot and a safety fence. Additionally, we can provide further support with commissioning upon request. We have an extensive stock of these robots, and the listed prices refer to the package price. Discounts are negotiable for larger order quantities. We invite you to contact us again to discuss further details. Sale to commercial customers only.

Stanje: rabljeno, Leto izdelave: 1983, Internal diameter min / max: 10 / 250 mm Grinding depth: 400 mm External diameter max.: 380 mm Swing diameter: 390 mm Table travel max.: 550 mm Table stroke min.: 2 mm Rapid traverse: 10 m/min Giedjvprxfspfx Af Ssr Table speed - stepless: 0 - 10 m/min Coarse adjustment: 18 mm Fine adjustment: 4 mm Max. workpiece weight: 100 kg Spindle head: B 6 DIN 55021 Spindle speeds - stepless: 15 - 1,500 rpm Swivel angle max.: +/- 30 degrees Spindle bore: 50 mm Drive power: 2 kW Rapid feed: 0 - 250 mm/min Stroke: 70 mm Drive power: 3 kW Machine weight approx.: 2.7 t Space requirement approx.: 3.0 x 3.0 x 3.2 m Internal grinding machine BAHMÜLLER - JES 12 - new control system (July 2015)

Stanje: zelo dobro (rabljeno), Leto izdelave: 1995, Max. panel width: 4400 mm Max. panel length: 4300 mm Max. main saw blade projection: 110 mm Godpfx Afemt Hhws Ssir Number of clamps: 8

Stanje: rabljeno, Leto izdelave: 2025, New: Yes Color: Orange Unladen weight: 905 kg Gisdpfx Afsx I Ihfs Sor Width: 278 cm Working width: 262 cm

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2017, proizvajalec krmilnikov: FANUC, model krmilnika: F0i-F, največja hitrost vretena: 12.000 obr/min, število osi: 4, To štiriosno vertikalno obdelovalno središče DOOSAN DNM 6700 je bilo izdelano leta 2017. Idealno za precizno obdelavo, ponuja robustno konstrukcijo in zanesljivost. Razmislite o tej priložnosti za nakup vertikalnega obdelovalnega centra DOOSAN DNM 6700. Za več informacij nas kontaktirajte. Dodatna oprema Gedpex D Sqtjfx Af Soir • Hladilnik vretena: vključen • Priprava za 4. os: pnevmatska vpenjalna linija • Nadzor navora: sistemi za nadzor orodja Prednosti stroja Tehnične prednosti stroja • Srednjetlačna črpalka za hladilno tekočino, tip 1: 19 bar, 1,5 kW, 18 l/min • Ciklonski filter: 25 µm • Obešeni transportni trak: izmet levo ali desno • Separacija olja: tračni tip Dodatne informacije Stroj je še vedno priključen na elektriko Tehnična specifikacija Stožčasta vpenjalna površina BT 40

Stanje: rabljeno, Leto izdelave: 2009, skupna dolžina: 5.500 mm, skupna širina: 2.300 mm, skupna višina: 2.900 mm, Poids : 18 700 kg Prix : Sur demande - Année de construction : 2009 - Documentation disponible : Non - Marquage CE : Oui - Certificat CE : Non - Numéro de série : 83261 - Commande : CNC - Marque du système de commande : HACO - Type de système de commande : BC59T Graphics - Nombre d’axes [pcs] : 6 : Y1+Y2+X+R+Z1+Z2 - Force de pressage [tonnes] : 250 - Largeur de travail max. [mm] : 4 300 Giodpfx Ajxrl Hdjf Sjr - Distance entre montants [mm] : 3 800 - Profondeur butée arrière [mm] : 1 000 - Système de bombage : Commande CNC - Porte-poinçon : À changement rapide - Options : Protection anti-pincement - Dimensions de transport : 5 500 mm x 2 300 mm x 2 900 mm (L x l x h) - Poids de transport [kg] : 18 700 kg - Nombre de colis de transport [pcs] : 1 Informations financières TVA : Le prix indiqué s’entend hors TVA TVA/régime de marge : TVA déductible pour les professionnels Livraison et reprise possibles à tout moment pour tous les équipements industriels Lukas van Rossum

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, potovalna razdalja osi X: 4.140 mm, pomik osi Y: 1.270 mm, pomik po osi Z: 275 mm, število osi: 5, This 5-axis BIESSE Rover A 1242 was manufactured in 2021. It features a working area of 4140 mm on the X-axis, 1270 mm on the Y-axis, and 275 mm on the Z-axis. The machine is equipped with brushless motors and a PC-based controller for enhanced performance. If you are looking for high-quality CNC woodworking machinery, you should consider the BIESSE Rover A 1242 that we offer for sale. Contact us for further details. • Working Area • Y (5-axis): 1270 mm • Y (4-axis): 1260 mm • Z (with vacuum modules H=74 mm): 230 mm • Z (with H=29 mm vacuum modules): 275 mm • Axes and Drives • X & Y: Rack and pinion drive; accuracy grade 6 • Z: Ball screw with preloaded nut; accuracy grade ISO C7 • Motors: Brushless motors with digital drives via Mechatrolink system • Control System and PC Hardware • Controller: BH660 (PC-based) with WRT (Windows Real Time) technology Gsdoyt Rrvepfx Af Soir • CPU: Intel Core i5 or higher • RAM: 16 GB • Storage: 256 GB SSD or higher • Display: 21.5-inch LCD color monitor • Operating system: Windows with real-time process management extension • Connectivity: Ethernet card; USB ports • Electrical and Pneumatic • Power supply: 380 / 400 / 415 V - 50/60 Hz • Control voltage: 24 V DC (stabilized power supply) • Enclosure cooling: Air conditioning system for operation up to 40°C (104°F) • UPS (uninterruptible power supply): 7-10 minutes runtime for data backup • Workpiece Support (ATS system) • Workpiece supports: 8 ATS aluminum beams on linear guides • Module supports: 24 supports (132 × 132 × H41.5 mm) with pneumatic clamping • Set-up assistant (SA): Manual positioning with LED indicators; ±1.5 mm accuracy • Vacuum zones: 2 independent work areas in X; 2 independent clamping areas in X • Software and Licensing • Primary software: NC-HOPS 7 MacroCAM • Safety and Maintenance • Safety system: Bumper system (front and rear) for instant stop in the event of collision • Protection: Transparent polycarbonate front shield and sound-dampening cover • Lubrication: Automatic lubrication system for linear guides and rack/pinion Additional equipment • Vacuum pumps (standard/optional): Up to two units, each 90/100 m³/h or 250 m³/h