Posteljni rezkalni stroj

Auerbach FBE 3000

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), potovalna razdalja osi X: 3.000 mm, pomik osi Y: 865 mm, pomik po osi Z: 900 mm, moč vretenovega motorja: 25.000 W, največja hitrost vretena: 4.000 obr/min, obremenitev mize: 10.000 kg, število osi: 3, This 3-axis Auerbach FBE 3000 bed-type milling machine was manufactured in 2011. It features a robust clamping surface of 3100 x 800 mm, capable of supporting a maximum table load of 10,000 kg. The machine is equipped with a KFM 1 multi-position milling head and an SK 50 tool holder, delivering spindle power of 25 kW at speeds up to 4000 rpm. If you are looking for a high-quality milling machine, you should consider the Auerbach FBE 3000 that we have for sale. Please contact us for further information. • Guides and traverse paths • Flat guides on all 3 axes, coated with plastic • Distance spindle center to table surface: 98-998 mm • Milling spindle • KFM 1 multi-position milling head • Tool holder: SK 50 (DIN 69871 Form A, DIN 69872 Form A) • Drawbar clamping force: 175-180 Nm • Rated drive power (continuous, two ranges): 25 kW • Speed range 1: up to 930 • Speed range 2: up to 4000 • Max. torque: 800 Nm • Gear ratio: 1:5.6 • Table (workpiece side) • Clamping surface: 3100 × 800 mm • T-slots: 7 × 18 H12 Bljdpfjy H Hl Tox Agtsg • Alignment slot: 1 × 18 H8 mm • Slot distance: 100 mm • Feed drives and measurement • Max. feed force Z: 30,000 N • Max. feed force X/Y: 20,000 N • Feed speed: 1-10 m/min • Rapid traverse: 15 m/min • Measuring systems: Directly encoded linear measuring systems • Hydraulics: • Operating pressure: 100 bar The tools/accessories visible in the pictures are optional!

Stanje: rabljeno, TEHNIČNI PODATKI - Število vreten: 2 - Število osi: 2 GLAVNO VRETENO - Hitrost vretena: 6500 [vrt/min] - Največji premer palice: 42 [mm] - Največji obdelovalni premer: 120 [mm] - Najmanjša ločljivost C-osi: 0,1 [stopinje] KONTRA VRETENO - Hitrost vretena: 6500 [vrt/min] - Največji premer palice: 42 [mm] - Najmanjša ločljivost C-osi: 0,1 [stopinje] ELEKTRIČNA OSKRBA - Napajalna napetost: 230 [V] - Skupna moč: 7,5 [kW] Bledpfxou E U Ufo Agteg TEŽA IN MERE - Prostor potreben: 5.400 x 1.900 [mm] - Višina stroja: 2.000 [mm] - Teža stroja: 5.000 [kg] DELOVNE URE - Ure pod napetostjo: 33.912 [h] - Obratovalne ure: 21.069 [h] DODATNA OPREMA - Krmilje: FANUC 160i - Rezervoar za hladilno tekočino - Transporter za ostružke - Enota za odvzem kosov - Trakasti transporter za kose

Stanje: rabljeno, Leto izdelave: 2017, Technical details: Turning diameter: 356 mm Turning length: 705 mm CNC control: CELOS M730 UM MAPPS Swing diameter: 742 mm Standard turning diameter: 275 mm Travel - X: 260 mm Travel - Y: 100 (±50) mm Travel - Z: 795 mm Blodpfxoyxpv Se Agtjg Rapid traverse - longitudinal/planar: 30 / 30 m/min Rapid traverse B-axis (sub-spindle part transfer): 734 m/min Spindle 1 speed: 4,000 rpm Spindle 1 power: 15/18.5/18.5 kW Spindle 1 torque: 409/505/599 Nm Spindle 1 max. bar capacity: 80 mm Spindle 2 speed: 4,500 rpm Spindle 2 power: 7.5/11 kW Turret stations / driven stations: 20 / 20 BMT40 Speed of driven tools: 10,000 rpm Power of driven tools: 3.7/5.5/5.5 kW Torque of driven tools: 14 / 24 Nm Total power requirement: 38 kVA Machine weight approx.: 6.3 t Space requirements approx.: 4 (9) x 2.1 x 2.2 m Equipment: Chip conveyor Bar loader interface Parts catcher spindle 1 and spindle 2 Piece counter and total counter Three-color signal lamp Spindle 1 power chuck Kitagawa B 210 (250 mm) Spindle 2 power chuck Kitagawa B 206 (160 mm) Belt conveyor for part removal Automatic door Interface for internal coolant supply Internal coolant supply 70 bar, Knoll Program restart Tool presetting device spindle 1 & 2 Coolant shower 1m short bar magazine IRCO High-performance precision turning center with Y-axis and sub-spindle. Outstanding for machining complex turned parts with off-center milling operations. Easy machine programming via CELOS-MAPPS 4 conversational control. Machine under power and can be demonstrated in operation (cutting under load). Very few operating hours. All available (driven) tool holders included. IRCO Simag bar loader included.

Stanje: rabljeno, Leto izdelave: 2014, Industrijski robot Proizvajalec: Kuka Bjdpfx Asxuwlwegtjlg Tip: KR210 R3100 ultra z 4,5 m linearno osjo Leto izdelave: 2014 Doseg: 3.196 mm Teža: 1.154 kg Nosilnost: 210 kg Kuka krmiljenje KRC4 Leto izdelave: 2014 Teža: 163 kg Programska oprema KSS 8.5.4 Kuka TouchPad KCP4 Kuka povezovalni kabli Kuka linearna os Tip: KL1500-3 T Leto izdelave: 2013 Dolžina pribl. 4,5 m Hod pribl. 3,5 m Kabelska veriga KRC4 Teža: 2.200 kg

Stanje: rabljeno, GOM - ATOS III Rev.02.1 - 3D-merilna naprava Stanje: rabljeno, zelo dobro. Tehnični podatki: Kamerni sistem: 2 x 8.000.000 Kamerne pike: 2048 x 2048 slikovnih pik (pribl. 4 megapiksle) Velikosti merilnega polja XYZ: 150 x 150 x 100 mm do 2000 x 2000 x 2000 mm Razdalja merilne točke: 0,075 mm do 1,0 mm Čas skeniranja: približno 2 sekundi Merilni volumen: 700 (vklj. s kalibracijsko ploščo) Tehnologija Blue-Light: Natančne meritve neodvisno od okoljskih svetlobnih pogojev. Vključuje računalniško opremo in USB ključek Programska verzija 2023 Vklj. Tritop sistem (kamera, 2x 1 m merilni letev, licenca) Vse v originalnih kovčkih Bljdpfx Asxr Umgsgtog Z stojalom, računalnikom, rackom, zaslonom, malim orodjem, referenčnimi točkami, 1x tipalo Priključite in takoj začnite delati…

Stanje: rabljeno, Details on request. Bledpfx Aedbmyzegtsg

Stanje: rabljeno, Leto izdelave: 2009, Premer kroženja nad posteljo 1050 mm Razdalja med konicama 6000 mm Višina konice 520 mm Dolžina struženja 4810 mm Največja masa obdelovanca (glavna vretena) 6000 kg Največja masa obdelovanca z luneto 8000 kg Navor na vretenu 12500 Nm Bledpfoygxy Ujx Agtjg Število vrtljajev vretena 2,8-560 1/min Pomik na obrat 0,08-56 mm Premer vpenjalne glave 630 mm Najdaljša prehodna pot vzdolžnega sani (support) 4810 mm Najdaljša prehodna pot prečnega sani (support) 530 mm Najdaljša prehodna pot sani za orodje (support) 340 mm Premer konjička (pinole) 150 mm Skupna električna moč 31 kVA Teža stroja pribl. 10500 kg Potrebni prostor pribl. 7860 x 1970 x 1480 mm Oprema/dodatki: - 2 x čelna plošča - 3 čeljustna vpenjalna glava - 2 x luneta - Multifix držalo - Stružni noži - Različne konice - Tehnična dokumentacija

Stanje: rabljeno, Leto izdelave: 1998, Tehnične podrobnosti: Premer struženja nad posteljo: 600 mm Premer struženja nad suportom: 400 mm Dolžina struženja: 2000 mm Višina konic nad suportom: 300 mm Razdalja med konicami: 1600 mm Hitrosti vrtenja: 3 - 2.500 vrt/min Vpenjalni konus lunete: MK 5 Bedpow Rkt Isfx Agtjlg Premer izvrtine glavnega vretena: 62 mm Hod pinole: 190 mm Vzdolžni pomiki: pribl. 0,001-10 nastavljivo mm/obrat Prečni pomiki: pribl. 0,001-5 nastavljivo mm/obrat Hitri pomik X-os: do 5000 m/min. Skupna potrebna moč: 40 KVA Teža stroja pribl.: 5,6 t Dimenzije stroja pribl. DxŠxV: 4,0 x 2,0 x 1,9 m Vključno z dodatno opremo, glej fotografijo

Stanje: novo, Leto izdelave: 2024, največja višina reza: 150 mm, Razpon rezanja okroglega jekla pri 45°: 108 mm, Obseg rezanja okroglega jekla pri 90°: 108 mm, BERG+SCHMID Double Mitre Band Saw GBS 218 Eco AutoCut Cutting Speed: 25-80 m/min • Mitre cuts left up to 60° • For cutting steel, stainless steel, and aluminum profiles • Quick-action vice with rapid clamping device a. • Integrated blade tension control b. • Carbide blade guide c. • Electric coolant system • Machine base (supplied disassembled) The AutoCut system consists of: • Hydraulic cylinder, feed control, spring package, end switch, enabling three operating modes: 1. Automatic lowering of the saw frame via hydraulic cylinder with steplessly adjustable feed control valve and limit switch at the end of the cut 2. Rapid descent of the saw frame from rest position to the workpiece, then switches to normal feed rate 3. Manual operation – hydraulic cylinder functions as a brake cylinder Saw blade dimensions: 2455x27x0.9mm Additional accessories such as saw blades, roller conveyors, length stops, minimum quantity lubrication, etc. available on request! Bedpet I R Edefx Agtjlg Delivery time: ex stock Waiblingen Beinstein

Leto izdelave: 1993, stanje: dober (rabljeno), številka stroja/vozila: 03.2370, Manufacturer: Arthur Klink Model: RISZ 10 x 1000 x 400 Year of manufacture: 1993 Weight: 6,500 kg (total) Machine No.: 03.2370 General / Technical Data: Used vertical hydraulic internal broaching machine with automatic workpiece feed for 2 workpieces, in good condition Pulling force: 10,000 kg Bodjcc D Ddepfx Agtjlg Broaching length: 1000 mm Broaching stations: 3 units Distance between broaching stations: 125 mm Draw head holder diameter: 3 x Ø 80 mm Clear width between cylinders: max. 435 mm Cutting speed: hydraulically infinitely variable from 1 m/min up to max. 10.9 m/min Return speed: hydraulically infinitely variable from 5 up to max. 27.5 m/min Machine dimensions (W x D x H): approx. 5500 x 2800 x 4900 mm Power supply / connected load: 380 Volt, 50 Hz / 38 kW Accessories / Special Equipment: The machine is equipped with a workpiece table and a traverse support for 3 broaching stations. Furthermore, the machine features an automatic workpiece feeding system for 2 workpieces. Clamping of the shank and end-piece holders is hydraulic. The machine includes a coolant system with an integrated magnetic chip conveyor, enabling operation without the need for a special foundation (pit). Remarks: The machine is designed for use in large-scale series production. It is in very good condition and still has its original paint. The machine can be inspected under power in our warehouse.