Vijačni kompresor

Atlas Copco GA18

Stanje: potreben popravila (rabljeno), Leto izdelave: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor - Transfer in current condition as inspected - Defective, not operational, issue: frequency inverter does not communicate with the software - Delivery rate: 3.2–6.9 m³/min - Motor power: 18–24 kW - Design: encapsulated Isdpfxehabk Do Ah Dobc - Max. pressure: 12.75 bar - Operating hours: 108,252 h - Load hours: 30,754 h - Year of manufacture: 2003 - Dimensions: 1850/850/H1900 mm - Weight: 592 kg

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) according to ISO 1217-3, C Nominal motor power: 18 kW Iodpfxsu Rptyj Ah Debc Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Stanje: zelo dobro (rabljeno), Leto izdelave: 2018, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: API838388, skupna masa: 480 kg, volumenski pretok: 225 m³/h, tlak (maks.): 12,75 letvica, Oprema: Na voljo je tipska ploščica, Ponujamo: vijačni kompresor, kompresor Atlas Copco GA18VSDFF PLUS Tehnični podatki: Moč: 18,5 kW Zmogljivost: 3,75 m3/min. Maksimalni tlak: 12,75 bar Leto izdelave: 2018 Frekvenčni pretvornik: da Vgrajeni sušilnik: da NOVO/RABLJENO: RABLJENO Ibjdov Drmrepfx Ah Doc

Stanje: dober (rabljeno), Leto izdelave: 2002, obratovalne ure: 197 h, SCREW COMPRESSOR GA 18 + 7.5P Serial number: 272265 Operating hours: 197 operating hours By integrating the GA compressors from Atlas Copco directly into the production area, a reliable compressed air flow is ensured directly at the point of use. This eliminates the need for a separate compressor room or an expensive and complex piping system. The GA compressors are designed for maximum efficiency, guaranteeing consistent and reliable production. Premium screw compressor Fully automatic, internally completely piped and wired compressor; single-stage, oil-injected compression; air-cooled; sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air. Compressor control system: Elektronikon II Technical Data Manufacturer: Atlas Copco Model: GA 18+ 7.5P Screw compressor Max. operating pressure: 7.5 bar Free air delivery: 54.3 l/s Flow rate: 3.51 m³/min Nominal shaft power: 18.5 kW Shaft speed: 3000 rpm Oil-water separator: Öwamat Reference conditions: Intake pressure: 1 bar Intake temperature: 20°C Relative humidity: 0% Usable flow rate at outlet of compact unit according to ISO 1217-3, C at operating overpressure 7.5 bar, 58.5 l/s, 3.51 m³/min Motor rated power: 18 kW Motor rated speed: 2940 rpm Shaft power requirement of the motor at maximum operating overpressure: 21.1 kW Shaft power requirement at idle: 4.9 kW Ibsdpfx Ahswbti Ij Doc Compressed air temperature after aftercooler: 25°C Cooling air volume: 1.15 m³ Oil filling volume: 7.6 l Residual oil content:

Stanje: dober (rabljeno), Leto izdelave: 2002, SCREW COMPRESSOR GA 18 + 7.5P Serial Number: 272262 Operating Hours: Only 1 hour in operation By integrating the Atlas Copco GA compressors directly into the production area, a reliable supply of compressed air is ensured exactly where it is needed. This eliminates the need for a separate compressor room or an expensive, complex piping system. The GA compressors are designed to deliver maximum efficiency and guarantee consistent, dependable operation. Ibedpfowbr Uijx Ah Djc Premium Screw Compressor Fully automatic, internally fully piped and wired compressor, single-stage, oil-injected, air-cooled, and sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air. Compressor control system Elektronikon II Technical data Manufacturer: Atlas Copco Model: GA 18+ 7.5P Screw Compressor Max. Operating Pressure: 7.5 bar Free Air Delivery: 54.3 l/s Flow Rate: 3.51 m³/min Rated shaft power (kW): 18.5 Shaft speed: 3000 rpm Oil-water separator: Öwamat Reference Conditions Intake Pressure: 1 bar Intake Temperature: 20°C Relative Humidity: 0% Usable flow rate at the outlet of the compact unit according to ISO 1217-3, C at operating overpressure of 7.5 bar: 58.5 l/s; 3.51 m³/min Rated motor power: 18 kW Rated motor speed: 2940 rpm Shaft power requirement of motor at maximum operating overpressure: 21.1 kW Shaft power at idling: 4.9 kW Compressed air temperature after aftercooler: 25°C Cooling air volume: 1.15 m³ Oil capacity: 7.6 l Residual oil content:

Stanje: dober (rabljeno), Leto izdelave: 2002, SCREW COMPRESSOR GA 18 + 7.5P This item is available 3 times, in the following configurations: 1x Serial number: 272261 Operating hours: 1492 Price: €5,035 1x Serial number: 272265 Operating hours: 197 Price: €5,875 1x Serial number: 272262 Operating hours: 1 Price: €6,295 By integrating the GA compressors from Atlas Copco directly into the production area, a reliable compressed air supply is delivered directly to the point of use. This eliminates the need for a separate compressor room or an expensive and complex piping system. The GA compressors are designed for maximum efficiency, ensuring consistent and dependable production. Premium Screw Compressor Fully automatic, internally fully piped and wired compressor, single-stage, oil-injected compression, air-cooled, sound-insulated. Aftercooler with integrated water separator and electronic condensate drain for cool and relatively dry compressed air. Compressor control system: Elektronikon II Technical Specifications Manufacturer: Atlas Copco Model: GA 18+ 7.5P Screw Compressor Max. working pressure: 7.5 bar Free air delivery: 54.3 l/s Air flow rate: 3.51 m³/min Isdpfx Asuyg S Ejh Dobc Rated shaft power (kW): 18.5 Shaft speed: 3000 rpm Oil-water separator: Öwamat Reference Conditions Intake pressure: 1 bar Intake temperature: 20°C Relative humidity: 0% Usable air flow at the outlet of the compact unit as per ISO 1217-3, C at operating overpressure 7.5 bar: 58.5 l/s; 3.51m³/min Motor rated power: 18 kW Motor rated speed: 2940 rpm Shaft power requirement of motor at max. operating overpressure: 21.1 kW Shaft power requirement idle: 4.9 kW Compressed air temperature after aftercooler: 25°C Cooling air flow: 1.15 m³ Oil fill quantity: 7.6 l Residual oil content: