Visokotlačni kompresor Atlas Copco Crepelle

Atlas Copco D44

Stanje: rabljeno, Leto izdelave: 2013, obratovalne ure: 14 h, Funkcionalnost: omejena funkcionalnost, številka stroja/vozila: TJ-350-20/40 KPSI //TJ-160-20/40 KPSI, skupna širina: 1.500 mm, skupna dolžina: 3.000 mm, skupna višina: 2.500 mm, pritisk: 2.800 letvica, obratovalni tlak: 2.800 letvica, gorivo: dizel, skupna masa: 3.000 kg, vrtljajska hitrost (min.): 700 obr/min, največja hitrost vrtenja: 1.500 obr/min, dolžina visokotlačne cevi: 60.000 mm, leto zadnje generalne obnove: 2025, Oprema: vrtilna hitrost brezstopenjsko nastavljiva, Naprava za čiščenje z visokim tlakom/ultra visokim tlakom, na prodaj, podjetje zapira zaradi upokojitve: 2 x 250 kW, batna črpalka, 20 in 40 kpsi / 1400 in 2800 barov tlaka, pogon z dizelskim motorjem, sistem za izpust preostale vode. 2 x 110 kW, batna črpalka, 20 in 40 kpsi / 1400 in 2800 barov tlaka, pogon z dizelskim motorjem, sistem za izpust preostale vode. 1 x 110 kW, batna črpalka, 40 kpsi / 2800 barov tlaka, pogon z dizelskim motorjem, sistem za izpust preostale vode. komplet z veliko različnimi dodatki in rezervnimi deli, pištole za izpust preostale vode, čistilci tal, čistilec tuljav, šobe, cilindri, orodja, na prodaj. samo za izvoz. Komplet 5 naprav za čiščenje z ultra visokim tlakom, z veliko rezervnimi deli in dodatno opremo, kot sledi: 1 x naprava za čiščenje z visokim tlakom z dizelskim motorjem Deutz-MWM V-8. brezstopenjsko nastavljiv tlak od 0–1400 barov in 0–2800 barov, sistem za izpust preostale vode, z kompletom za zamenjavo bata, kot sledi: 1400 barov pri 99 litrih/minuto in 2800 barov pri 46 litrih/minuto. Visokotlačna glava z pušami in ventili ostaja enaka pri obeh ravneh tlaka, 1400 in 2800 barov. Preklop med ravnjo tlaka 1400 in 2800 barov poteka z enostavno zamenjavo bata. Naprava je bila izdelana leta 2013 in uporabljena kot rezervna naprava, vendar samo enkrat za 14 ur pri 2800 barih za čiščenje toplotnih izmenjevalcev. Ta naprava za čiščenje z ultra visokim tlakom je nameščena na pocinkani jekleni konstrukciji. Motor Deutz-MWM je bil kupljen kot rabljen motor s približno 3.000 ur delovanja in opremljen z novo visokotlačno črpalko za čiščenje z vodo Jetech UHDW leta 2013. Dodatno je vključen velik izbor dodatne opreme in rezervnih delov, kot so pištole za izpust preostale vode in nožni ventili, vrtljivi spoje, vrtljivi priključki, čistilci površin, rotacijske šobe, visokotlačne palice, vložki za šobe, tesnila, specialno orodje itd. Na voljo je tudi identična naprava za čiščenje z ultra visokim tlakom, vendar z motorjem Scania V-8 in 850 urami delovanja pri maks. 1400 barih / 99 litrih/minuto. Tudi ta naprava ima komplet za zamenjavo bata za 1400 barov/99 litrov/minuto in 2800 barov/46 litrov/minuto. Ta naprava je nameščena v 20-čevljevnem kontejnerju z 800-litrskim dizelskim rezervoarjem in delovno mizo/objemko. Poleg tega je na voljo še 3 naprave za čiščenje z visokim tlakom, vsaka z močjo 110 kW, od katerih sta 2 opremljeni z kompleti za zamenjavo bata za 1400 in 2800 barov. Tretja naprava je Kamat K11000 z delovnim tlakom 2800 barov. Na voljo je tudi hidravlična naprava za čiščenje toplotnih izmenjevalcev z rotacijsko palico, nameščena na dvižni mizi, primerna za zelo velike toplotne izmenjevalce. Vse naprave izvirajo iz opustitve poslovanja mojega podjetja zaradi moje upokojitve. Iščemo kupca za vse stroje in dodatno opremo kot celoten paket. samo za izvoz. Gjdexc E Trjpfx Akujkb

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Product-contacting parts are made of stainless steel 1.4571, the remainder of the used mixer dryer is constructed from 1.4301. Machine designation: Used Continuous Horizontal Mixer Dryer Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of manufacture: 2002 Speed: 107 rpm Gkjdpfx Akoitcu Esuob Material: 1.4301 Drive motor: 5.5 kW Design: EExdellCT4 Total capacity: 235 litres Product-contacting parts: stainless steel 1.4571 Features: double jacket, mechanical seal Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1,600 kg Technical documentation: Yes Note: Operating temperature 130°C, design temperature 200°C, mixing vessel internal pressure -1/+3 bar, double jacket pressure +6 bar Accessories: base frame Condition: used Price: on request

Stanje: novo, Leto izdelave: 2016, 1 piece of factory-overhauled, unused industrial bevel helical gearbox by ASUG, TGL 21815. All gearbox components have been replaced, except for the housing! Gkodogwlrdopfx Akueb Claw coupling: 800 mm (only one half available) Maximum torque: 27,829 Nm Gear ratio: i = 1:80 Maximum power: 51 kW Oil fill: 170 kg Input speed (n1): 1400 rpm Output speed (n2): 17.5 rpm Weight: 1,450 kg Shaft diameter d1: 65 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Base length: 1,170 mm !! Gearbox is supplied WITHOUT oil cooler !!

Stanje: dober (rabljeno), Copeland Multi Compressor Refrigeration Units Deep Freeze / Normal Cooling - 4x Copeland D6DT5-320X-AWM/D compressors - Cooling capacity: 220 kW at -10ºC/+40ºC, 56 kW at -35ºC/+40ºC - Displacement: 4 x 126.9 m³/h Gkedpfxjg N Hu Ss Akueb - With original Güntner GVH 067B/2x3N condensers - Quantity in stock: 1 unit - Refrigerant: R404A - In very good condition We have many other refrigeration systems: Bitzer, Copeland, Frascold, Lunite, Küba, Güntner, ECO, Alfa-Laval, Goedhart, Helpman We also offer a wide range of other refrigeration equipment: chillers, compressors, coolers, condensers, cold rooms, refrigeration and catering furniture, as well as machines and equipment for gastronomy and meat processing. View our other listings or contact us directly— not all items are listed on Machineseeker.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2001, CEVNA UHT STERILIZATOR ZA SOKOVE PROIZVAJALEC: KF ENGINEERING, NEMČIJA Gkodpfx Aev Tl D Nskusb KAPACITETA: 11 TON NA URO PRIMEREN ZA VSE VRSTE SOKOV, VKLJUČNO S PARADIŽNIKOM NAJVIŠJA TEMPERATURA: 124 °C KRMILNI SISTEM: PLC SIEMENS-7

Stanje: dober (rabljeno), Roots-type Booster Blower Manufacturer: Leybold Gksdpfx Akjd Hh Nveueb Model: RUVAC RA 9001 Condition: Fully overhauled, tested and serviced Included: New paintwork, newly mounted motor bearings, electrical inspection Warranty: up to 12 months Delivery time: Ex stock

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, pritisk: 16 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 400 °C, vhodna napetost: 6.000 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: zrak, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Due to a revision of long-term industrial strategy, an industrial Howden KK&K TWIN CA46 steam turbogenerator, complete according to original OEM supply, is available for sale. The unit is BRAND NEW, entirely manufactured and tested at OEM level, but has never been installed or put into service. It remains covered by the manufacturer’s warranty and is stored in a closed, controlled environment. Immediate availability eliminates the standard lead time, which for this class of equipment is typically 24–36 months. Main scope of supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Gjdpfxsyidvdj Akuekb Key design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Rated speed: 1,500 rpm Electrical generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, ready for grid-parallel operation Included systems: - Integrated base-mounted oil system - Main mechanical oil pump and auxiliary electric pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy facilities - Combined generation of electric power and process steam Condition and status: - Condition: NEW - Manufacturing year: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning possible with OEM support Possible application fields: - Biomass and waste-to-energy plants for the production of electric power and process steam, with immediate unit availability and no multi-year production lead times - Industrial cogeneration (CHP) in facilities with continuous process steam consumption (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a rapid alternative to new OEM units with 24–36 month lead times Price: on request. Further technical details and documentation available upon request.

Stanje: rabljeno, Leto izdelave: 2018, obratovalne ure: 3.450 h, Funkcionalnost: popolnoma funkcionalen, skupna masa: 23.000 kg, Ponujamo: Kompletna, vključno z namestitvijo, naprava za proizvodnjo dušika (plug & play). Proizvajalec: AtlasCopco / AirCo, tip: PSAL58SN Letnik: 2018 Serijska številka: 2018-21968 Teža: približno 24 ton (ocena) Minimalna/maksimalna temperatura: +3 °C / +45 °C Maksimalni tlak: 300 bar Napetost: 400 voltov Nameščen v 40-čevljnem kontejnerju, izoliran z dovodom/odvodom zraka, z zimskim/poletnim načinom delovanja Aktivno ogljični filter, tip AK300 Predfilter/končni filter, tip AF267UHU Sistem za odvajanje vlage North Pole, tip 100PlusPan 2 x kompresorji visokega tlaka, moč 15 kW vsak 2 x rezervoarji za dušik, prostornina 500 l / 1000 litrov Sušilnik, tip A-DRY-105 2 x filter, tip AF85H 6 x jeklenke s stisnjenim dušikom, 300 bar Gkjdexvtl Nopfx Akujb 56 m³/h – stalna proizvodna zmogljivost Čistoča: 99,9 % (odvisno od proizvodne zmogljivosti) Poraba električnega toka: 125 amperov Transport lahko organiziramo po dogovoru. Če ste zainteresirani ali imate vprašanja, mi pišite. Dodatne fotografije in tehnične podrobnosti na zahtevo. Vse informacije so podane brez garancije in odgovornosti, pridan je tudi opozorilo o možnih napakah in možnosti prodaje tretji osebi. Cena je bruto cena za izvoz. Za dodatna vprašanja nas pokličite. Govorimo francosko / Govorimo rusko. Govorimo angleško / Govorimo romunsko. Viber / WhatsApp / Skype. Za doplačilo uredimo vse carinske in registracijske zadeve. Za doplačilo dostavimo vozila do pristanišča.

Leto izdelave: 2016, stanje: pripravljen za uporabo (rabljen), The Coiltech Decoiler Straightener Feeder System is a compact coil feeding system for presses. Strip width: 600mm, material thickness: up to 6.5mm, straightening rollers: 7x115mm, decoiler capacity: 6000kg, inner diameter (min-max): 470-520mm. Connected load: 7.5kW, supplied with documentation. Gjdpfxsi El Uce Akuskb

Leto izdelave: 2023, stanje: novo, The SEMIX Compact type concrete batching plants are designed for limited space conditions and easy transport to overseas countries. The SEMIX Compact 30 fits into a single container and can be fully assembled within three days. The SEMIX Compact 30 is equipped with concrete mixers featuring a capacity of 750/500 liters, available as either single-shaft or planetary mixers. Depending on the silicon content of the concrete mix formula, SEMIX concrete mixers utilize NiHard4 or Hardox 450 wear parts. All SEMIX aggregate storage bins feature a trapezoidal shape for additional stability. The durable steel construction ensures a long service life. Aggregates are weighed in the weighing conveyor, which transfers the aggregates to the discharge mechanism. SEMIX compact concrete batching plants offer a variety of aggregate transfer mechanisms. Even in compact batching plants, users can choose between a skip hoist mechanism or a transfer conveyor for aggregate transfer. Gedpfogazkpjx Akuokb All SEMIX concrete batching plants are controlled by a SCADA system with integrated Schneider PLC. Users can track all utilized materials and integrate their CRM system. For service purposes, SEMIX’s engineering team can access the automation system remotely.