Vijačni kompresor

Atlas Copco, Kaeser, Boge, CompAir GA15-75, BSD72-CSDX162, SLF75, L75

Leto izdelave: 2020, stanje: pripravljen za uporabo (rabljen), A compressor system from the plant manufacturer Rico, consisting of two Atlas Copco compressors, two refrigeration dryers, and a Beko oil-water separator, also by Atlas Copco, is available. 1) Screw compressor Atlas Copco GA 45 VSD+, year of manufacture: 2020, air delivery: 9.4 m³/min, operating pressure: 13 bar, motor power: 45 kW, motor speed: 4500 rpm, machine dimensions (L/W/H): approx. 1200mm/1100mm/2000mm, weight: approx. 860kg. 2) Screw compressor Atlas Copco GA 45 VSD FF, year of manufacture: 2012, power: 45 kW, operating pressure: 18.5 bar, speed: 3000 rpm. 3) 2x refrigerated compressed air dryers Atlas Copco FX 15, air flow: 15 m³/min, operating overpressure: 13 bar, pressure drop: approx. 0.3 bar, refrigerant: R410A, refrigerant amount: 2050g, max. inlet air temperature: 60°C, machine dimensions (L/W/H): approx. 900mm/750mm/1000mm, weight: approx. 160kg. 4) Compressor management system Atlas Copco Equalizer 4.0/ES6-MK5, control scope: 2-6 compressors. 5) Oil-water separator Beko ÖWAMAT 15, throughput capacity: 6m³-30m³/min, oil outlet: DN40, tank volume: 115.5l, operating volume: 84.3l, oil collection container: 2x10l, max. operating pressure: 16 bar, machine dimensions (L/W/H): approx. 1100mm/550mm/800mm, weight: approx. 40kg. Total system hours: 8,656h, controller hours: 42,334h. Documentation available. On-site inspection possible. Hnsdpfx Aoxdc Uvogijk

Stanje: rabljeno, Leto izdelave: 1998, Overview This machine was built in 1998 by the French manufacturer Sidel. The machine is in very good condition, has already been professionally dismantled, and is stored in a warehouse. Technical Details - Capacity: 7,200 bottles/hour at 1.5L - Number of cavities: 6 (moulds not included) - Equipped with quick-change system for shell moulds - Number of heating modules: 10 modules - Neck personalization: 29/25 - Operating hours: 47,000 - Machine has been regularly maintained Machine is equipped with: - Sidel elevator for preforms to the unscrambler - Sidel preform unscrambler & feeding system - Sidel oven & blowing wheel for 6 moulds - Sidel control cabinet - Sidel PCC drive & control panel Comprehensive spare parts list available upon request. Hnodpfxerkgy Uo Agijk

Stanje: dober (rabljeno), Spindle diameter: 80 mm Spindle taper: SK50 Spindle speeds: 11 - 1000 rpm X-axis travel: 1700 mm Y-axis travel: 1800 mm Z-axis travel: 1800 mm Spindle extension (W-axis): 710 mm Table dimensions: 1100 x 900 mm Elbo digital readout: On Y-axis and Z-axis Equipped with: - Rotary table - Several tool holders Spindle motor: 7.5 kW Machine dimensions (LxWxH): 5100 x 2650 x 3300 mm Hnsdpfx Agsphl Ecsijk Machine weight: 10 tons

Stanje: dober (rabljeno), Leto izdelave: 2003, Funkcionalnost: popolnoma funkcionalen, teža obdelovanca (maks.): 12.000 kg, dolžina pomika po osi Y: 300 mm, dolžina podajanja os Z: 1.080 mm, premer mize: 1.200 mm, hitrost pomika os X: 3 m/min, hitrost podajanja osi Y: 500 m/min, hitrost podajanja os Z: 3 m/min, vhodni tok: 195 A, premer obdelovanca (maks.): 1.600 mm, dolžina vretena za rezkanje: 450 mm, namizna vrtalna stiskalnica: 400 mm, hitrost vretena (min.): 250 obr/min, skupna masa: 51.000 kg, moč: 115 kW (156,36 KM), Oprema: dokumentacija / priročnik, Liebherr high-performance gear hobbing machine LC1502 in good condition Hsdewqm A Tjpfx Agijnk Control: Liebherr LH90 V4, drives by Bosch Rexroth Comprehensive accessories included such as BHG, coolant unit for lubrication and coolant, fume extraction, cutter arbors, various software packages/limit extensions, and complete documentation. We can also assist with installation and commissioning right up to production, according to your needs!

Stanje: dober (rabljeno), Leto izdelave: 2010, obratovalne ure: 100.000 h, tlak (min.): 10 letvica, tlak (maks.): 10 letvica, vrsta hlajenja: voda, Oprema: Na voljo je tipska ploščica, dokumentacija / priročnik, hladilni sušilnik, Atlas Copco Screw Compressor GA 18 - 10 FF Fully automatic, internally completely piped and wired compact unit, single-stage oil-injected compression, air-cooled, soundproofed, built-in refrigeration dryer (WorkPlace Air System™). Technical Data Reference Conditions: Intake pressure 1 bar Intake temperature 20 °C Relative humidity 0% Usable volumetric flow at the outlet of the compact unit at operating overpressure 9.75 bar: 49.4 l/s (2.96 m³/min) Hnsdou Rptyepfx Agijk according to ISO 1217-3, C Nominal motor power: 18 kW Nominal motor speed: 4,867 rpm Shaft power requirement at maximum operating overpressure: 24 kW Shaft power requirement at idle: 5.6 kW Compressed air temperature after dryer: 23 °C Cooling air volume: 0.23 m³/s Oil capacity: 12.2 l Residual oil content under reference conditions

Stanje: rabljeno, Širina materiala: 300 mm Teža koluta: 3 t Debelina materiala: 2 - 4 mm Ravnalko, 7 valjev, proizvajalec Schleicher, tip RM 6-95/160 Širina traku: 300 mm Debelina traku: 2 - 4 mm Ravnalni presek: 1200 mm² Napetost: 220/380 V 50 Hz Hsdpfx Ajcdrmmjgienk Moč: 3,1 kW Razvijalec s pritiskalnim valjem, proizvajalec Schleicher, tip H-3 Maksimalna obremenitev: 3 t Širina traku: 400 mm Napetost: 220/380 V 50 Hz Moč: 3,92 kW Brez krmiljenja

Leto izdelave: 1955, stanje: rabljeno, Radial drilling machine, drilling machine, arm drilling machine - Arm reach: 2055 mm - Max. distance from machine table to spindle mount: 1700 mm - Taper mounting: MK5 - Motor power: 7.5 kW - Spindle speeds: 11.2–1400 rpm - Column diameter: Ø 450 mm - Spindle stroke: 540 mm - Thread cutting device - Automatic feed: 0.037–2.0 mm/rev - Clamping surface: 920 x 1600 mm - Dimensions: 2580/1110/H3450 mm Hsdpfxod Enr Io Agienk - Weight: 6465 kg

Leto izdelave: 1988, stanje: dober (rabljeno), Kompletan Atlas Copco kompresor zraka uključujući Donaldson Ultra Filter i spremnik, u dobrom radnom stanju. Hodpehpx U Aofx Agionk

Stanje: delavnici obnovljeno (rabljeno), številka stroja/vozila: 550-235-ELD, GENERAL CHARACTERISTICS Max. rolling diameter: 41 mm Max./Min. module range: 1.5 / 0.39 Max. rolling width: 92 mm Max. stroke of the tool holder slide: 760 mm Max. rack length: 610 mm Max./Min. diametral pitch: 20/40-32/64 Serial Number: 550-235-ELD ELECTRICAL CHARACTERISTICS Hnedjd Nw Ttjpfx Agisk Main motor power: 15 HP

Stanje: rabljeno, Scrubber dryer, floor cleaning machine, sweeper Hnodpfsc R S E Sjx Agijk - Delivery in as-is condition as inspected - Machine is supplied without battery, brush, and squeegee - Working width: 500 mm - Battery charger included - Quantity: 1 unit available - Dimensions: 1150/520/H950 mm - Weight without battery: 66 kg