Stroj za profiliranje

ARKU/YODER 500 x 2,5 mm

Stanje: dober (rabljeno), Leto izdelave: 2012, doseg roke: 2.696 mm, model krmilnika: KR C4, KUKA Robot Model: KR 90 R2700 pro Technical Data Maximum Reach: 2,696 mm Rated Payload: 90 kg Rated Additional Load Carousel / Wrist / Arm: 0 kg / 0 kg / 50 kg Rated Total Load: 140 kg Positional Repeatability (ISO 9283): +/- 0.06 mm Number of Axes: 6 Mounting Position: Floor Footprint: 830 mm x 830 mm Weight: approx. 1,058 kg Axis Data Lhsdotpwxlepfx Adksd Range of Motion A1: +/- 185° A2: -140° / -5° A3: -120° / 155° A4: +/- 350° A5: +/- 125° A6: +/- 350° Speed at Rated Payload A1: 136°/s A2: 130°/s A3: 120°/s A4: 292°/s A5: 258°/s A6: 284°/s Operating Conditions Ambient Temperature during Operation: 10°C to 55°C (283 K to 328 K) Controller: KR C4

Stanje: novo, Leto izdelave: 2024, Magnetic separator for chip transport line Tube magnet with 4 magnetic plates (permanent magnet) Hinged door for easy removal of metal parts Tube diameter: 180 mm Ljdpfx Adscqvhwokjhd Location: In stock at 54634 Bitburg - immediately available -

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Ledpfsiyyf Ijx Adkohd Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Leto izdelave: 1987, stanje: zelo dobro (rabljeno), 1 piece Chemical Standard Centrifugal Pump with very low operating hours. The pump is suitable for sour condensate and aggressive acids. Also suitable for saltwater!! Manufacturer: Sulzer Model: ZA 200-4500 Material: Duplex 9.4460 / Noridur 1.4593 Flow rate: 250 m³/h Delivery head: 27 meters at 980 rpm Shaft power: 42 kW Motor power: 75 kW NPSH: 1.6 Speed: 980 rpm Year of manufacture: 1987 Pump speed of 1480 rpm is also possible!! Performance approx. at 1480 rpm (specification without guarantee): Flow rate: 430 m³/h Delivery head: 62 meters Shaft power: 88 kW Shut-off valves and pipework in stainless steel are also available. Material 1.4593 Noridur is very well suited for: - Chemical and process engineering industries Lhodpsh S Nz Sefx Adked - Sulphuric and phosphoric acid - Salt extraction and processing - Petrochemical industry - Coke plants - Textile and pulp industry - Food and sugar industry - Mining/coal mining and conveying - Flue gas desulphurization plants - Acidic, chloride-containing wash slurries - Acidic process water - Wastewater treatment/sewage plants - Offshore and marine technology

Stanje: zelo dobro (rabljeno), Tacchi HD/1450 – CNC stružnica 725 x 4000 mm (2012) Serijska številka: 7264 Leto izdelave: 2012 Krmiljenje: Fanuc OiTD CNC Stanje: Rabljena – v dobrem delujočem stanju Tehnične specifikacije: Višina med konicama: 725 mm Obseg obdelave nad ležiščem: 1450 mm Obseg obdelave nad prečnim ležajem: 1000 mm Razdalja med konicama: 4000 mm Glavni pogonski motor: 60 kW Največja masa med konicama (brez vpetja): 15.000 kg Območje hitrosti vretena: 1,9 – 560 obr/min Značilnosti in oprema: 2 x 3-točkovna luneta Ročni obroč Transporter ostružkov Lhjdsxc In Sjpfx Adkjd 4-pozicijska hidravlična revolverska glava 4-čeljustna glava Fanuc OiTD CNC krmiljenje

Stanje: novo, Leto izdelave: 2026, CIDAN Machinery manufactures slitting and cut-to-length lines that can be programmed and operated by both skilled and unskilled users. Our cut-to-length lines are all-in-one systems designed to withstand high production volumes over time while occupying minimal floor space. CIDAN Machinery offers many of its state-of-the-art features as standard – straightening units, sheet guides for precise feeding, guillotine shears with hold-down devices and double-edged blades, feed units, foot pedals for remote operation, and much more. To provide the absolute best technological solutions for coil processing worldwide, Forstner – the globally leading brand for slitting and cut-to-length lines since 1960 – is now also part of the CIDAN Machinery Group. - Processing sheet metal from coil saves money, reduces scrap, and frees up warehouse space. - We have the right solution for any production scale! - Coil processing lets you streamline operations, boost productivity, and increase your profits! - The extensive Forstner portfolio can be flexibly combined into a highly efficient production line tailored to your requirements. Key parameters such as system performance, material removal, and time required to access material are crucial for fast and cost-effective production. - With our solutions, you can easily process coils from 500 kg up to 8 tons. Larger coils mean fewer changeovers, less waste, and a more efficient processing workflow. Lsdpfx Ajmfrgrjdkohd - Need quick and flexible access to a wide range of materials without time-consuming changeovers? With a multi-mandrel decoiler you have up to eight different materials available at any time, and changing from one coil to another is considerably faster. - With one of our fully-featured slitting and cut-to-length lines, there is no longer any need to cut sheet strips separately with a guillotine shear. - Whether you sell cut-to-size sheets or rewind from large to smaller coils – we have the right solution for you! - Efficient coil handling shortens lead times, increases production floor space, and reduces capital tied up in inventory.

Leto izdelave: 2002, stanje: rabljeno, Pressure: 63 t Reach: 315 mm Stroke: 8–100 mm Stroke rate: 140 strokes/min Ram adjustment: 63 mm Table surface: 1200 x 630 mm Ram surface: 800 x 315 mm Through hole in table: Ø 110 mm Table height: 820 mm Ram bore: Ø 50 mm Installation height: 335 mm Total power requirement: 7.5 kW Lsdolp U D Tjpfx Adkjhd Machine weight: approx. 5 t Pneumatic clutch-brake combination Centralized oil lubrication Hydraulic overload protection Manual stroke adjustment Manual ram adjustment Two-hand operation Foot control Roller block strips in table Hydraulic clamp on the ram Counterbalance cylinder Approved for manual loading operations

Stanje: zelo dobro (rabljeno), Offered is a used solids pump / dirty water pump. SDAG Wismut-Aue. For further details, please refer to the photos. Ledpfx Adehwnfcjkshd

Stanje: rabljeno, Rollforming Line for Plasterboard and Galvanized Subframe Profiles General Description: Complete rollforming line for the production of galvanized steel profiles used in drywall structures and galvanized subframes for doors and windows. The machine processes galvanized steel coils with typical thicknesses of 0.6 – 1.0 mm, featuring quick-change roller adjustment to suit different profile types. Products that can be produced - Drywall Profiles: Lhjdpfxsxnmyqo Adked • Galvanized tracks: widths 57 mm and 77 mm, height 35 mm, steel thickness 0.6 mm • Galvanized studs: 39×55 mm and 39×75 mm, steel thickness 0.6 mm • U profiles for suspended ceilings: 27×60×27 mm, steel thickness 0.6 mm • Shadow gap profiles for suspended ceilings: 20×29×28 mm, steel thickness 0.6 mm - Galvanized subframe profiles 1.0 mm: • Complete series from ART. 201 to ART. 217, with a variety of geometries for L, U, Z, and special profiles. • Variable dimensions: widths from 20 to 46 mm, heights from 15 to 31 mm, customizable versions available. Main technical features • Working thickness: 0.6 – 1.2 mm • Coil width: variable depending on profile • Number of forming passes: 19 rollforming stations • Rollers: made of hardened and ground steel • Drive: independent motorization for each roller group • Speed: adjustable feed rate • Cutting unit: flying shear or automatic guillotine • Options: punching units, slot stamping, and quick-change tooling systems

Stanje: rabljeno, Leto izdelave: 2003, stiskalna sila: 260 t, Hydraulic Press Brake Make: HACO Model: ERMS 60-260 Year of manufacture: 2003 Technical Specifications Manufacturer: HACO Model: ERMS 60-260 Year: 2003 Pressing force: 260 t Bending length: 6000 mm Lhjdowkttrspfx Adkjd Dimensions (L x W x H): approx. 7.0 x 2.0 x 3.70 m Weight: approx. 31 t Equipment • Digital control ATS 560 • Fiessler safety light curtain (front) • Centrally adjustable crowning • Amada tooling system • Controlled axes: Y1, Y2, X • R-axis manual • 1 set upper tool • 1 set lower tool All information is provided without guarantee. A demonstration is possible at any time in the showroom.