Linearni robot

Arburg MULTILIFT V 15

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2018, obratovalne ure: 7.500 h, We are selling our Multilift V 15KG with only 7,500 operating hours. The unit can be tested; the original purchase price was €59,000! Technical Specifications: Z-Axis (transverse to machine longitudinal axis) Travel: 1,600 mm Maximum speed: 3.0 m/s X-Axis (parallel to machine longitudinal axis) Travel: 900 mm Maximum speed: 2.0 m/s Y-Axis (vertical axis) Hodpey Emm Uofx Afaop Travel: 1,000 mm C-Axis (for gripper rotation) - Swivel range 0° / 90°, both end positions monitored and manually adjustable - Pneumatic drive, including valve control - Maximum torque at 6 bar: 28 Nm - Weight: 2.6 kg First vacuum system (Venturi principle) with air-saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, programmable vacuum, integrated condition monitoring for early detection of leakages and wear, tubing routed close to gripper; customer connection via push-in fitting for hose size OD 6 mm / ID 4 mm Second vacuum system (Venturi principle) with air-saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, programmable vacuum, integrated condition monitoring for early detection of leakages and wear, tubing routed close to gripper; customer connection via push-in fitting for hose size OD 6 mm / ID 4 mm Third vacuum system (Venturi principle) with air-saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, programmable vacuum, integrated condition monitoring for early detection of leakages and wear, tubing routed close to gripper Fourth vacuum system (Venturi principle) with air-saving function, suction capacity 65 l/min, blow-off function, vacuum switch for part monitoring, programmable vacuum, integrated condition monitoring for early detection of leakages and wear, tubing routed close to gripper; customer connection via push-in fitting for hose size OD 6 mm / ID 4 mm Tenth pneumatic valve 5/3 with closed center position for gripper functions, tubing routed to gripper flange with quick-connect couplings DN 2.7 for hose size OD 6 mm / ID 4 mm; customer hose connection 8 freely programmable inputs for connecting 8 gripper side sensors, wired to gripper flange with 25-pin connector; this allows monitoring of 8 sensors; a mating connector for the gripper connection is included in delivery Second interface for connecting 8 additional sensors, via 25-pin connector at the gripper flange, including mating connector for gripper connection Third interface for connecting 8 additional sensors, via 25-pin connector at the gripper flange, including mating connector for gripper connection Fourth interface for connecting 8 additional sensors, via 25-pin connector at the gripper flange, including mating connector for gripper connection Interface with 4 freely programmable inputs and outputs, not potential-free, via 42-pin socket on the MULTILIFT, for peripheral devices Additional interface with 16 freely programmable inputs and outputs (24V DC), not potential-free, wired to a 72-pin socket on the MULTILIFT; push-in fitting for hose size OD 6 mm / ID 4 mm.

Leto izdelave: 1965, stanje: rabljeno, Pressure: 150 t Outreach: 550 mm Stroke: 10 - 140 mm Table surface: 1180 x 980 mm Strokes per minute: 40 Installation height: 500 mm Hedpfscubatox Afaop Ram surface: 1040 x 800 mm Ram adjustment: 70 - 150 mm Pin hole (depth x diameter): 435 x 55 mm Power requirement: 15 kW Machine weight: approx. 12 t Space requirements: approx. 3 x 1.7 x 3 m - with additional brake - ram weight compensation - motorised ram adjustment - central grease lubrication (manual) - break plate - table clamping plate - safe for manual feeding operations - operating manual available

Stanje: skoraj kot novo (rabljeno), Leto izdelave: 2017, obratovalne ure: 16.000 h, Funkcionalnost: popolnoma funkcionalen, 1 used two-component injection moulding machine Manufacturer: ARBURG Model: 720A3200-800/70 Year of manufacture: 2017 Hedsv S E Dgspfx Afaep Clamping force: 320 tonnes Tie bar distance: 720 x 720 mm Min./max. installation height: 300 - 800 mm Opening stroke: 600 mm Screw diameter 1: 50 mm Max. shot volume: 392 cm³ Moulded part weight in PS: 359 g Screw diameter 2: 22 mm Max. shot volume: 34 cm³ Moulded part weight in PS: 31 g Control system: Selogica Request technical specifications.

Leto izdelave: 1987, stanje: rabljeno, Sheet width 150 mm Hodpfjfn Aqljx Afasp Coil weight 80 kg Coil outside diameter 650 mm Mandrel height 1000 mm Expansion range 230 - 445 mm Total power requirement kW Machine weight approx. t Space requirement approx. m motorized decoiler

Stanje: rabljeno, Leto izdelave: 1989, Pressure: 250 t Stroke: 20 - 190 mm Strokes per minute: 24 / 48 Throat depth: 500 mm Clearance between frame walls: 1000 mm Installation height: 615 mm Table area: 1400 x 880 mm Pass-through opening in table: 450/500 mm Table height above floor: 800 mm Hsdpsvut Ncofx Afasp Ram area: 1380 x 620 mm Ram adjustment: 125 mm Drive power: 29.0 kW Weight: 27.0 t Required floor space approx. 2.0 x 2.6 x 4.1 m (L x W x H) Approved for manual loading operations according to German Accident Prevention Regulations (UVV). Equipped with pole-changeable motor, pneumatic clutch/brake combination, hydraulic overload protection in the ram, pneumatic ram counterbalance, motorized ram adjustment, semi-automatic stroke adjustment, motorized central lubrication, two-hand operation control. The machine can be inspected under power at our warehouse.

Leto izdelave: 2021, stanje: pripravljen za uporabo (rabljen), Na voljo je skoraj nova brizgalna naprava Arburg. Zapiralna sila: 1600kN, razdalja med stebri: 520mm, zapiralni hod: 364mm, izmetalni hod: 150mm, izmetalna sila: 40kN, brizgalna enota: 400, brizgalni tlak: 2500bar. Dimenzije stroja D/Š/V: ca. 6000mm/1800mm/2200mm, teža: ca. 6000kg, krmiljenje: Selogica, delovne ure: ca. 67h. Vključno z zaščitnim ohišjem s čistim zrakom FilterFanUnit in odjemnim robotom. Dokumentacija na voljo. Ogled na lokaciji je možen. Hodsw Rqwtjpfx Afajp

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2021, obratovalne ure: 67 h, vpenjalna sila: 1.600 kN, premer vijaka: 45 mm, skupna masa: 5.900 kg, proizvajalec krmilnikov: ARBURG, model krmilnika: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force of up to 1600 kN. The machine is equipped with a take-out robot and an enclosure with a FilterFanUnit, ensuring clean operation. It is ideal for precision plastics processing and offers a mold height of 250 mm and a tie-bar distance of 825 mm. Contact us for more information about this machine. Additional Equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Advantages Technical Advantages of the Machine • Thermoplastic cylinder: 45 mm, highly wear-resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger hold pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 variable displacement pumps • Ejector pressure P/Q-controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Center clamping plate set, 125 mm • Machine raised by 100 mm (heightened vibration elements) • 8 programmable digital I/Os • 6 electrical heating zones for the mold • 1 additional heating circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet Hodpfxex D E Dye Afasp • Reinforced screw coupling with multispline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switch • Sound pressure level: 70 dB(A) | ± 3 Additional Information • Screw diameter: 45 mm • Injection pressure (max.): 1580 bar • Shot weight (max. g PS): 232 g • Heating capacity: 9.7 kW | 5 zones • Net machine weight: 5900 kg

Stanje: rabljeno, Leto izdelave: 1988, številka stroja/vozila: 724306, Pressing force: 63 t Stroke rate: 400 strokes/min Sheet width: 180 mm Hodocxxt Tspfx Afaop Stroke: 10 - 80 mm Feed length: 150 mm Strip width: 180 mm Control: KAISER Voltage: 380 V Space requirement approx.: 1.85 x 2.70 x 3.00 m + original Kaiser gripper feed Model ZR 18 D

Stanje: rabljeno, Leto izdelave: 2005, obratovalne ure: 70.000 h, Funkcionalnost: popolnoma funkcionalen, vpenjalna sila: 4 kN, premer vijaka: 70 mm, Offer details: Stock No.: 14171 Manufacturer: Engel Machine type: ES 2050 - 400 HL Year of manufacture: 2005 Operating hours: 70,000 h Control system: CC200 Display language: German Location: D-52249 Eschweiler Clamping unit: Clamping force: 4,000 kN Platen size (h x v): 1,400 x 1,080 mm Minimum mold height: 350 mm Max. opening stroke: 1,300 mm Ejector stroke: 250 mm Ejector force (forward): 83 kN Injection unit: Screw diameter: 70 mm Injection pressure: 1,482 bar Stroke volume: 1,155 cm³ Shot weight (PS): 1,040 g Injection rate: 419 cm³/s Hedeu Awalopfx Afasp Screw speed: 183 rpm Nozzle contact force: 110 kN Electro-hydraulic equipment: Rated power, pump motor: 45 kW Dimensions and weights: Installation space approx.: 8.30 x 2.35 x 2.48 m Total weight: 31,200 kg Accessories: - Oscillation dampers - 2 x 24-circuit water manifold - Material hopper - Degassing screw Additional equipment: - Robot interface - 4 x hydraulic core pulls

Leto izdelave: 2003, stanje: zelo dobro (rabljeno), 7 Stück MOTAN Materialbehälter für Trockner, 200 Liter, Heizgerät, Baujahr ca. 2003. Die Behälter verfügen über eigene Temperaturregler. Insgesamt 8 Stück verfügbar, derzeit 7 Stück vorhanden. Hsdpsfwx Ebjfx Afajp