Sistem filtriranja

Aqua plus GmbH UF ap200

Leto izdelave: 2020, Stanje: novo, DESCRIPTION The so-called half water is produced from the demineralized water station using ion exchange technology. The station consists of 3 columns: - Strongly acidic cation exchanger operated in the sodium cycle, - Strongly basic anion exchanger operated in the chloride cycle, - Carbon filter Itedpsfz Nakjfx Af Teb Our demineralization stations RDI-2 / RDI-4 are equipped with fully automatic control heads. Pipes The columns are made of AISI316L stainless steel.

Stanje: novo, Cutting capacity at 90° (round): 350 mm Cutting capacity at 90° (square): 330 mm Cutting capacity at 90° (rectangle): 450 x 320 mm Saw band length: 4250 x 34 x 1.1 mm Band speed: 40 + 80 m/min Table height: 845 mm Saw blade width: 34 mm Total power requirement: 2.2 kW Machine weight: approx. 0.985 t Space requirements: approx. 1.4 x 2.0 x 2.2 m Double mitre band saw, hydraulic semi-automatic, DGS 350/450 HA-I • Mitre cuts left & right up to 60° without machine conversion • 34 mm saw blade width • Large, ball-bearing supported, rotary worktable • Saw blade guides adjustable over extra-wide linear rails • Heavy-duty, robust gearbox • Large-area clamping plates Iedpsfgyicefx Af Totb • Infeed and outfeed roller • Removable chip tray (for cleaning) • Free-standing, safe, ergonomic control panel • Storage space for blades and consumables • Cutting pressure control and feed rate regulator • Fully hydraulic vice • Quick clamping (front loading) • Material height sensor (automatic cut start detection) Semi-automatic operation: 1. Clamp material 2. Start saw 3. Rapid descent to start of material or direct cutting for series cuts 4. Switch off saw band 5. Raise frame just above the material 6. Open vice Optimal, material-independent cutting results through fine adjustment of the saw frame via: * Pressure control valve (cutting force) * Feed rate control valve (cutting speed) * Clearly arranged selector switch with pictograms for intuitive operation

Stanje: zelo dobro (rabljeno), Heating boiler Loos UT 5200 kW incl. oil burner Ijdpfx Afemn Hpyo Tstb

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, Viessmann Paromat-Triplex Output: 225 kW Iedpfst Iuyfex Af Tetb Installed in a container. Inspection only by prior telephone arrangement! Preferred sale to dealers, commercial operators, or for export. All information provided without guarantee; subject to errors and prior sale. The seller accepts no liability for typing or data transmission errors. Naturally, we can also handle all formalities. Loading possible.

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2018, obratovalne ure: 4.300 h, nosilnost: 6.000 kg, dvižna višina: 9.000 mm, vrsta goriva: dizel, tip droga: teleskopski, gradbena višina: 2.530 mm, moč: 104 kW (141,40 KM), dolžina vilic: 1.200 mm, lastna masa: 11.400 kg, skupna dolžina: 6.100 mm, vrsta pogona: Diesel, gradbena širina: 2.480 mm, Rigid telehandler Load centre: 500 Fork width: 200 mm Fork thickness: 60 mm Itjdpfx Afewzztno Tob Mast type: Telescopic Transmission: Hydrostatic Speed category: 30 Condition: Ready for use and fully functional Technical condition: Normal Front tires type: Pneumatic Front tires size: 500/70-R24 Front tires condition: 80 - 100% Rear tires type: Pneumatic Rear tires size: 500/70-24 Rear tires condition: 80 - 100% Description: Incl. 4 new tires 3rd valve, air conditioning,

Stanje: rabljeno, vrsta prenosa: drugo, prevoženi kilometri: 1.001 km, voznikova kabina: drugo, Vehicle location: Bovenden, Body: MB, MAN, IVECO, VOLVO, SCANIA, and others. Used rear axles, 50 units in stock! Various used rear axles available from €300 to €1,500 each, depending on condition. ACCESSORY INFORMATION WITHOUT GUARANTEE. Subject to change, prior sale, and errors excepted! Itedpfsth T Uqox Af Tob

Leto izdelave: 2025, Stanje: novo, številka stroja/vozila: Neumaschine auf Bestellung, Description: - Screening deck system consisting of 1 deck for screening minerals from pre-crushed material; maximum input grain size: 0–100 mm - Screening cut size: 0–30 mm - Throughput approx. 60 m³/h (material dependent) - Material separation into 2 fractions: 0–30 mm and oversize - To be mounted on customer’s own impact plates or subframe Technical Data:  Screening deck: Length = 3,120 mm; Width = 1,400 mm o External dimensions: Length = 3,300 mm; Width = 2,050 mm o Screening area 4.6 m², number of shafts: 24 units o Drive: 2 x 4.0 kW gear motors o Screening body made of polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and cost-effective adjustment to other grain sizes possible) o Bearing lubrication routed to the outside; central lubrication system available as an option at extra cost  Colour: black RAL 9017 / green RAL 6018 or according to customer specification (at extra cost) Isdpfx Afod Rbmkj Tjtb Delivery time: approx. 20 weeks

Stanje: zelo dobro (rabljeno), Leto izdelave: 2014, Initial commissioning: 2014 Control system: Heidenhain iTNC 530 HSCI incl. HR 520 handwheel Machine hours Machine power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Tool holder: HSK 63A Itjdpfx Afowywcie Teb Tool clamping: hydraulic Coolant supply: external and internal Drives linear axes Feed rate X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Connection data Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement machine with peripherals: approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, gantry, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filtration system - 50-position chain tool changer - Workspace enclosure - Chip conveyor - LTA emulsion mist extraction system Optional at extra charge: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition, and still under power for inspection! The photos are for illustration purposes and show a new machine of this type. Original photos will follow shortly!

Stanje: rabljeno, Funkcionalnost: popolnoma funkcionalen, Inventar livarne Kompleten inventar peščene livarne v Venlo-Lomm – Nizozemska Modelna linija HWS, tip SFM2 / 30 zabojev/uro Krmiljenje S/7 Lijak rezkar Stroj za streljanje jeder Röper H6,5-H16 hidravlični – krmiljenje S/7 Mešalec jedrnega peska znamke Klein YXLON rentgenska naprava Spektralna analiza Spectro Analizator Ideco Modelni stroji Priprava peska Talilne peči Trakasti brusilnik Zabojnik za nevarno blago Sušilna peč Itodpfx Aovz Apref Tjb Tračna žaga Peskalni stroj Hali žerjav 32 t / žerjavna proga: 5750 mm / letnik 2002 Prisrčno vabljeni na ogled livarne Naprave in artikli se prodajajo rabljeni Prodajalec izključuje jamstva.

Stanje: dober (rabljeno), Leto izdelave: 1992, Funkcionalnost: nepreverjeno, skupna masa: 18.000 kg, moč: 250 kW (339,91 KM), Za kosovni odpad, palete, ostanke lesa itd. Enovretenski rezalnik z elektrohidravličnim pogonom Širina rotorja: 2500 mm Premer rotorja: cca 500 mm Elektromotor: 250 kW Iedpfx Afsq I Rkde Totb