Separator za lističe

Andritz K1220

Leto izdelave: 2003, stanje: delavnici obnovljeno (rabljeno), Stock number: 2651 1 used, partially overhauled in 2023, underwater pelletizing system Throughput up to approx. 450 kg/h depending on material, consisting of: Type BKG (Nordson) Start-up valve with hydraulic unit Granulator type A300 incl. die plate and cutter bar, drive 4.4 kW By-pass system TVE 1000 ED pellet dryer, drive 4 kW incl. Agglomerate catcher Temperature-controlled water system with Water tank 200 liters, installed heating capacity 9 kW Water pump 2.2 kW with 15 m³/h Heat exchanger Control system Dkjdpfjiyyf Ijx Aplol Further UWG pelletizers available ex works Wuppertal (Gala, BKG Nordson, Econ) Available from stock Wuppertal: Complete compounding and pelletizing lines with single-screw or twin-screw extruders.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2008, Funkcionalnost: popolnoma funkcionalen, vrsta vhodnega toka: Klimatska naprava, hladilna zmogljivost: 56 kW (76,14 KM), vrsta hlajenja: voda, vhodna frekvenca: 50 Hz, ogrevalna zmogljivost: 67 kW (91,09 KM), vrsta goriva: plin, "SANYO" PANASONIC ECO G Gas Heat Pump Air Conditioner Model: SGP-E190J2GU2W Nissan FY5 engine Power supply: 230 V AC, 1 phase, 50 Hz Max. electrical power input: 1.16 kW, 5.4 A (continuous operation) Device protection rating: IP24 Cooling capacity: 56 kW Heating capacity: 67 kW Thermal input (GCV) (cooling): 43.5 kW Thermal input (GCV) (heating): 46 kW Refrigerant: R407C, 17 kg Design pressure high-side: 30 bar Dodpfed Tiu Ejx Aplekl Design pressure low-side: 16 bar FOR OUTDOOR USE ONLY! We have 4 units in stock!

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), številka stroja/vozila: Reg Nr. 976, Machine designation: Used mixing dryer Manufacturer: AVA / Holland Merten GmbH Model: HTK 200 Year of manufacture: 2002 Rotational speed: 107 rpm Material: Stainless steel Drive motor: 5.5 kW Version: EExdellCT4 Total capacity: 235 litres Product-contact parts: Stainless steel 1.4571 Gearbox: Helical geared motor Equipment: Double jacket, mechanical seal, shaft heating Dimensions: L 3400 x W 1100 x H 1500 mm Unladen weight: approx. 1,600 kg Technical documentation: available Notes: Operating temperature 130°C, design temperature 200°C, internal mixer pressure -1/+3 bar, double jacket pressure +6 bar Accessories: Base frame, Maier head HWR 225 Dodpfxjitcvuj Aplokl Condition: Used, very good Price: on request

Stanje: zelo dobro (rabljeno), The plant essentially consists of: - 2 feeding units (walking floor bunkers) Dsdpfx Aelxzl Esplekl - 2 silos, each with 55 m³ capacity and discharge screws - 2 screw conveyors - 4 mixing and homogenization chambers - 5 transport conveyor belts - 2 parallel twin-shaft extruders for processing woody biomass - 1 twin-shaft paddle mixer - Twin-shaft extruder for homogenization - Laboratory container with mixing and dosing equipment for liquid extracts

Stanje: dober (rabljeno), Comprising: - 3 tanks, 18,000 litres each - 3 tanks, 15,300 litres each - With walkway system - Material: AISI 316 - Square discharge door (bottom) - Motorised mash discharge - Round manway DN 400 (cylindrical part) - Residual outlet, ball valve Ø 40 Friedrich No. 2 Dkjdpfxsib H Ddj Aplel - Clear drain, ball valve Ø 40 Friedrich No. 2 - Sampling port - Transfer line with ball valve Ø 40 Friedrich No. 2 - Dome Ø 400 mm, eccentric - Central dome DN 400, fitted with a removable sieve cylinder insert (for keeping the mash cake moist) Dimensions: - 3 tanks, 18,000 litres: Ø 2000 mm, height 5600 mm - 3 tanks, 15,300 litres: Ø 2000 mm, height 4800 mm - Ground clearance: approx. 550 mm

Leto izdelave: 2002, stanje: zelo dobro (rabljeno), Product-contacting parts are made of stainless steel 1.4571, the remainder of the used mixer dryer is constructed from 1.4301. Machine designation: Used Continuous Horizontal Mixer Dryer Manufacturer: AVA / Holland Merten GmbH Type: HTK 200 Year of manufacture: 2002 Speed: 107 rpm Material: 1.4301 Drive motor: 5.5 kW Design: EExdellCT4 Total capacity: 235 litres Product-contacting parts: stainless steel 1.4571 Features: double jacket, mechanical seal Dksdpfjitcu Eex Aplol Dimensions: L 3400 x W 1100 x H 1500 mm Empty weight: approx. 1,600 kg Technical documentation: Yes Note: Operating temperature 130°C, design temperature 200°C, mixing vessel internal pressure -1/+3 bar, double jacket pressure +6 bar Accessories: base frame Condition: used Price: on request

Stanje: novo, Leto izdelave: 2026, Bio Machines že več kot 20 let načrtuje proizvodne linije, proizvodne stroje in izvaja montažne storitve. Ponujamo tako celotne proizvodne linije kot tudi posamezne stroje, prilagojene vašim potrebam. Naše rešitve vključujejo: linije za proizvodnjo peletov, linije za proizvodnjo briketov, sušilne sisteme: rotacijske in tračne, kladivne mline, talne transporterje (moving floors), silose za krmo, sekalnik za les, verižne, korčne, polžaste in tračne transporterje, ciklone, skladiščne silose, hladilnike za pelete, sejale za žagovino in pelete, pakirne stroje za majhne in velike vreče, linije za paletizacijo vreč in številne druge specializirane stroje. Dkjdpfoylm Tysx Apljl

Leto izdelave: 2011, stanje: pripravljen za uporabo (rabljen), The ultrafiltration system is used for cleaning various liquids. The membrane elements feature a 37/3.8 channel design, 0.1 μm pore size, and a length of 1300 mm. Each of the two modules contains 32 ceramic rods with a capacity of 2,000 L/h each. Scope of supply: 1 construction frame, 1 feed pump, 1 rod heater, 2 bleed pumps, 1 cleaning tank, 1 membrane valve, 1 pneumatic diaphragm pump, 1 UF ceramic module, 1 temperature monitoring unit, 1 control valve, 4 pressure gauges with display, 1 control unit according to VDE 0110/0113 CE, 1 flow meter, and 1 pre-assembly of the system at the supplier’s factory. Djdpfjf Dc D Hjx Aplokl

Stanje: rabljeno, Leto izdelave: 2007, System: Mobile sludge dewatering plant, Decanter / Mobile centrifuge Manufacturer: Hiller Model: Solid bowl decanter centrifuge Type: DP51 Machine No.: H3991 Year of manufacture: 2007 Max. permissible drum speed: 3,400 rpm Drum inner diameter: approx. 505 mm Drum material: ST52.0 Drum wall thickness: 13.0 mm Other features: Steel swap body with reinforced floor Accessories: Feed pump for sludge inlet, polymer dosing pump, polymer solution pump Dkjdpfxevz Dnpo Aplel Polymer station: 2-chamber system for liquid polymers with agitator, adjustable Twin-shaft paddle mixer: galvanized steel Total weight: approx. 4,200 kg Purchase and rental available.

Stanje: zelo dobro (rabljeno), Malo rabljeni avtomatski stroji za izdelavo TC, TU, TZ profilov. Namenjeni izdelavi in valjanju TC, TU, TZ profilov do debeline kovine 1,5 mm. Tehnične specifikacije: Izdelano v Estoniji Nastavljiva višina profila: 100 – 250 mm Širina profila: 50 mm Djdpfx Aox Sx R Seplekl Zavihani rob profila: 15 mm Minimalna debelina valjane pločevine: 1 mm Maksimalna debelina valjane pločevine: 1,5 mm Razdalja med valji: 300 mm Mere stroja: 900 x 4000 mm Stroj nima giljotine in perforacijskih valjev. Upravljanje je preprosto – dva gumba. Če imate dodatna vprašanja, z veseljem odgovorimo.