CNC rezkalni stroj s pomično kolono

ANAYAK HVM 7000

Stanje: zelo dobro (rabljeno), Leto izdelave: 2011, Funkcionalnost: popolnoma funkcionalen, CNC HAAS VF-2SS 2011 2 KOS CNC HAAS VF-2SS 2011 Bwsdjyh Rwxopfx Agtjl DELUJOČE

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2009, Funkcionalnost: popolnoma funkcionalen, CNC Turning and Milling Center - DMG GILDEMEISTER - CTX gamma 1250 TC Year of manufacture: 2009, served as a demonstration machine until 2011, in production since 2012 The machine can be inspected under power by prior appointment. Condition: Very good (high accuracy), immediately operational. Spindle hours (as of August 1, 2025): 9,580 h The core feature of the machine is the integrated traveling column with turning-milling spindle and interpolating B-axis. Machine basic data: * Partial hollow chuck device (hydraulic) * C-axis * Upper cross slide with turning/milling spindle as a motor spindle, with hydraulic clamping during turning, interface: Capto C6 * Y-axis: +/- 200 mm * B-axis: +/- 120° * Tool disc magazine * Absolute, direct position measuring systems in X, Y, Z1 axes * USB interface, Ethernet interface TECHNICAL SPECIFICATIONS: * Control unit: Heidenhain CNC Pilot 4290, 3-D path control TURN PLUS Work area: * Swing diameter over bed: 630 mm * Turning diameter: 630 mm * Distance between centers: 1,510 mm * Max. bar diameter: 65 mm Main drive I: * Drive power (100% / 40% duty cycle): 24 / 34 kW * Speed range: up to 5,000 rpm * C-axis speed: up to 5,000 rpm Turn-mill spindle: * Tool interface: Capto C6 * Spindle speed: up to 12,000 rpm * Drive power (100% / 40% duty cycle): 13.2 / 22 kW Tool magazine: * Number of tools: 36 * Machine dimensions (L/W/H) approx.: 6,860 x 4,220 x 2,530 mm * Approx. total weight: 18.5 t EQUIPMENT: Well-equipped ... * No steady rest * Complete documentation available No guarantee for completeness or accuracy of technical data and equipment specifications. Bsdpfx Aew Hg Nlogtowl A detailed technical data sheet and further information regarding the equipment are available on request.

Stanje: novo, Ostas 3-Roll Plate Bending Machine SBM 1270 x 95 Special features included in the price: • Hardened rolls Bwedpfsg Tzbhex Agtjl • Motorized rear roll adjustment • Digital display Features: • Asymmetrical 3-roll plate bending machine with motorized drive • Hardened rolls • Motorized rear roll adjustment • Digital display • Swivable upper roll • Cone bending device • Foot pedal Technical Details: • Sheet width: 1270 mm • Sheet thickness: 3.0 mm • Roll length: 1270 mm • Roll diameter: 95.0 mm • Minimum bending diameter: 140.0 mm • Motor power: 1.1 kW • Dimensions (L x W x H): 2100 x 760 x 1250 mm • Weight: 470 kg

Stanje: rabljeno, CNC 3+2 Axis Vertical Machining Center DECKEL MAHO Type DMU 35 M CNC Control SIEMENS 810D with ShopMill Serial No. 11065353554 Year of manufacture: 2001 Travel distances: X: 350 mm, Y: 240 mm, Z: 340 mm Table movements: C-axis: 360° Swivel range: +105° / -15° Bwjdpfxjvt D D Ue Agtjl Universal swivel rotary table: 400 x 290 mm, centering bore 30H6 Table load capacity: max. 100 kg Distance spindle nose - table: min. 145 mm to max. 485 mm Feed rate: 5,000 mm/min Rapid traverse (X / Y / Z): 5 m/min Input increment: 0.01 mm Total power requirement: 15 kVA Spindle speed range: 20 - 6,300 rpm Spindle drive power: 6.3 / 10 kW (100% / 40% duty cycle) Torque: max. 55 / 80 Nm Tool holder: SK 40 DIN 69871 Retaining bolts: DIN 69872 or ISO 7388/2 Type B Interface: Serial RS232C, LAN (RJ45) Electrical connection: 400 Volt, 50 Hz, 15 kVA Compressed air connection: 6 bar - CNC control Siemens Sinumerik 810D with ShopMill V05.03.22, NCU 03.03.34-CCU1E, MMC103 - 3 axes controlled (X, Y, and Z axes) - Manual swivel rotary table, C-axis = table rotation 360°, B-axis = swivel range +105° / -15° - Direct position measurement system for all 5 axes - Electronic handwheel - Spindle drive via servomotor with toothed belt and 2 transmission stages - Fully enclosed safety cabin with sliding door - Swiveling control panel - Coolant nozzles on vertical head - Chip tray with coolant tank and coolant pump - Work area lighting - Documentation available Space requirements L x W x H 2000 x 2000 x 2100 mm Weight 1750 kg Good condition

Stanje: kot nova (razstavni stroj), 3,000 kg welding positioner, hydraulically height-adjustable Speed: 0.05 to 0.6 rpm Table diameter: 1,200 mm Tilting angle: 0 to 120° Total height adjustment: approx. 700 mm Height adjustment with vertical table, up to center: 960 mm ~ 1,910 mm Bwodjdvn E Uepfx Agtol Dimensions with horizontal table: 1,200 mm to 1,900 mm

Stanje: zelo dobro (rabljeno), Leto izdelave: 2019, obratovalne ure: 29.081 h, Funkcionalnost: popolnoma funkcionalen, FPT Industrie S.p.A. – Travelling Column / Gantry Milling Machine Model: DINOSPIN Year of Manufacture: 2019 Serial Number: DP0419015 Origin: Italy (FPT Industrie S.p.A., Made in Italy) Machine Weight: 44,280 kg Control: Heidenhain TNC640 (15") RAM: 4 GB Hard Drive: 32 GB (min. 21 GB program storage) Resolution: Linear axes down to 0.1 µm / Rotary axes down to 0.0001° Interfaces: 2x Ethernet 1000BaseT, 1x USB 2.0 (front), 4x USB 3.0 (rear) Block Processing Time: 0.5 ms Handwheel: Heidenhain HR510 (Remote handwheel) Universal Milling Head (5-axis machining, continuous movement on 2 axes) Max. Spindle Speed: 18,000 rpm Bodoyrndmspfx Agtswl Swivel Range C: ±270° Swivel Range A: ±185° Max. Rotation Speed A/C: 30 rpm Operating Torque A/C: 450 Nm Clamping Torque Axes: 1,400 Nm Positioning Uncertainty: 8 arcsec / Scatter: 4 arcsec (VDI/DGQ 3441) Spindle Power (S1/S6): 22/33 kW Spindle Torque (S1/S6): 84/128 Nm Continuous Operation Constant Power: 2,500–18,000 rpm Continuous Operation Constant Torque: 10–2,500 rpm Tool Holder: HSK-A63 DIN 69893 Rigid Tapping: yes Dynamic RTCP: yes AUTOCAL (automatic calibration): yes Tool Changer (overlapped-wheel type, with tool change arm) Magazine Capacity: 80 tools Max. Tool Ø: 75 mm Max. Tool Ø with adjacent pocket free: 125 mm Max. Tool Weight: 10 kg Max. Tool Length: 600 mm (for 40 tools) Max. Tool Length: 250 mm (for 40 tools) Tool Type: HSK-A63 DIN 69893 Measuring Systems Laser Tool Setter: Tool length/radius + tool breakage control (software included) Probe for Workpiece Measurement/Alignment: Radio transmission, cycles included in CNC Monitoring Sensor for Vibration/Collision Detection: Response time approx. 1 ms External/Internal Coolant System (LEU/LEIUHP) Tank Capacity: 3,500 l Filtration: Filter A 60 µm / Filter B 40 µm External Cooling: max. 30 l/min, max. 10 bar Through-Spindle Coolant: max. 30 l/min, max. 70 bar Additional Options/Features External Tool Spray Mist Compressed Air Through Spindle (High Speed) up to 24,000 rpm

Stanje: rabljeno, TECHNICAL DATA - Distance between centers: 650 [mm] - Center height: 175 [mm] - Max. workpiece weight between centers: 80 [kg] - Travel X/Z: 285 / 800 [mm] - X-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Z-axis programmable feed rate: [mm/min] - Resolution: 0.0001 [mm] - Table swiveling range: 0 - 8.5 [degrees] GRINDING WHEEL HEADSTOCK - T1 grinding wheel dimensions: 500 x 63 x 203.2 [mm] - Speed: 50 [m/s] - Power: 9 [kW] - Manual swivel range: -15 / +195 [degrees] - Minimum indexing increment: 2.5 [degrees] - Internal grinding speed: 40,000 [rpm] - Power: 3 [kW] WORKPIECE SPINDLESTOCK - Taper type: MT5 - Speed: 1 - 1500 [rpm] - Power: 1.8 [kW] - Bore: 30 [mm] - Minimum C-axis resolution: +/- 0.5 [degrees] TAILSTOCK - Taper type: MT4 - Quill diameter: 50 [mm] - Quill travel: 35 [mm] ELECTRICAL SUPPLY - Supply voltage: 400 [V] - Total drive power: 20 [kVA] WEIGHT AND DIMENSIONS - Required floor space: 2,670 x 2,050 [mm] - Machine height: 1,900 [mm] - Machine weight: 4,000 [kg] MACHINE HOURS - Power-on hours: 190 [h] Bodsylc R Uopfx Agtewl ACCESSORIES - Control: FANUC Oi-TD - Electronic handwheel - 3-color status indicator light - Oil mist extraction unit - Direct measuring systems for axes: X / Z - Dynamic balancing of grinding wheels: MPM - Automatic contact detection: SENSITRON 6 - Stationary dressing device - Workpiece touch probe - Coolant tank: 375 [l] * with paper filter

Stanje: rabljeno, Technical details: Spindle diameter: 130 mm Drilling depth: 1380 mm X-travel: 2500 mm Y-travel: 1600 mm Z-travel: 380 mm W-axis: 900 mm quill stroke U-axis: 320 mm slide stroke Control system: on request Tool holder: ISO SK50 Feed rate: cross slide: 4.5–180 rpm Spindle speed: 4.5–900 rpm Feed rate (X/Y): 5–2000 Total power requirement: approx. 40 kW Bwedpevr S Uljfx Agtsl Approx. machine weight: approx. < 35 t plus additional equipment The machine can be offered in four different sales options. Please select: 1. The machine is in like-new mechanical condition, as is/where is. 2. The machine as is/where is, incl. plate table 4000x2000x300 mm = stock no. 1101081 3. The machine rewired, with new electrical cabinet, digital display, with 4 axes, Siemens AC drives, Siemens axis motors (50A/31Nm), with 12 months warranty on all new parts. 4. Optional additional equipment can also be offered, e.g. coolant system, chip conveyor, enclosure, etc. Let's discuss your specific needs. Best regards.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2016, obratovalne ure: 12.000 h, potovalna razdalja osi X: 3.000 mm, pomik osi Y: 800 mm, pomik po osi Z: 720 mm, skupna višina: 3.376 mm, obremenitev mize: 2.500 kg, skupna masa: 16.300 kg, največja hitrost vretena: 18.000 obr/min, moč vretenovega motorja: 33.000 W, teža orodja: 8.000 g, največja dolžina izdelka: 5.480 mm, število osi: 5, This 4-axis Mazak VTC 800/30 SR was manufactured in 2016 and is a robust vertical machining center featuring a table width of 3,500 mm and a length of 820 mm. It offers a maximum spindle speed of 18,000 rpm and rapid traverse speeds of 50 m/min on all X, Y, and Z axes. The machine is equipped with a tool changer holding 30 positions and can handle a maximum tool weight of 8 kgf. Take advantage of this opportunity to purchase the Mazak VTC 800/30 SR vertical machining center. Contact us for further information. • Travels • Table size: 3,500 x 820 mm • B-axis: +110 degrees • Min. distance spindle nose to table: 140 mm • Max. distance spindle nose to table: 860 mm • Work spindle • Tool holder: HSK63 • Capacity for 155 tools with HSK63 holders • Feed rates • Rapid traverse X/Y/Z: 50 m/min • Worktable • T-slot width: 18 mm • Number of T-slots: 7 • T-slot spacing: 100 mm • Table height from floor: 870 mm • Tool changer • Tool positions: 30 (standard) / 48 (optional) • Tool selection: shortest path • Tool shank: steep taper 40° • Occupied adjacent pockets: 80 mm • Free adjacent pockets: 130 mm • Total magazine tool weight: 150 kgf • Chip-to-chip time: 4.7 s • Utilities • Connection voltage: 380/400/415 V +10% • Mains frequency: 50/60 +1 Hz • Air pressure: 5-9 bar • Air consumption: 260 l/min • Tank volume: 500 l • Machine condition / usage • Spindle hours: 12,000 Additional equipment Bwodpox Nkp Ujfx Agtsl • Air extraction system AirFresh FMN V12 (installed on both sides and connected to a door sensor) • Fixture for vertical operation of the rotary table • 2x Renishaw TS27R integrated tool presetters • License options: ShopMill Sinumerik 5-axis milling, 5-axis machining package • Spare parts: • Y-axis motor for tool magazine • Travel motor for linear axis • Travel motor for rotary axis • Cylinder for swiveling unit

Stanje: rabljeno, Eccentric Pressing Machine HAULICK + ROOS Type RVD 125 Bodpfehlnzkex Agtowl Double-column Eccentric Press Machine No. 212560 Year of manufacture: 1981 Pressing force: 125 tons Table size: 880 x 800 mm Table opening: 470 x 140 mm Column width: 900 mm Column width (lateral): 415 mm Ram stroke: 45 mm Ram adjustment: 0-80 mm Die height as pictured: 340 mm Strokes per minute: 50 to 300 spm Main drive motor power: 22 kW Power supply: 380 Volt, 50 Hz - Double-connecting rod mechanism with 4-point eccentric shaft bearing for off-center ram pressure loads - Separate electrical control cabinet - NC roller feeder EBU, width 250 mm, year of manufacture: 2003 - Separate operating console for roller feeder - Coil feed direction: left to right Space requirement (press) L x W x H: 3000 x 2000 x 3020 mm Transport height: 2950 mm Weight of press: approx. 11 tons