Samodejna žaga Ambas

AMBAS SN/AU 250 2C

Leto izdelave: 2014, stanje: potreben popravila (rabljeno), Funkcionalnost: popolnoma funkcionalen, The machine has been out of use for several years and therefore requires maintenance before being put into operation, which will be the responsibility of the buyer. Djdpfx Aetu U Ebocfskt

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, pritisk: 16 letvica, vhodna frekvenca: 50 Hz, vrsta vhodnega toka: trifazni, temperatura: 400 °C, vhodna napetost: 6.000 V, vrtljajska hitrost (min.): 1.500 obr/min, največja hitrost vrtenja: 1.500 obr/min, vrsta hlajenja: zrak, Industrial Steam Turbogenerator Howden – Model KK&K TWIN CA46, NEW, never installed or commissioned, still under manufacturer’s warranty. Due to a revision of long-term industrial strategy, an industrial Howden KK&K TWIN CA46 steam turbogenerator, complete according to original OEM supply, is available for sale. The unit is BRAND NEW, entirely manufactured and tested at OEM level, but has never been installed or put into service. It remains covered by the manufacturer’s warranty and is stored in a closed, controlled environment. Immediate availability eliminates the standard lead time, which for this class of equipment is typically 24–36 months. Main scope of supply: - Steam turbine on skid with integrated gearbox - Synchronous generator supplied separately Turbine technical configuration: - Model: KK&K TWIN CA46 - Double-casing turbine (Steam Part A + Steam Part B) - Integrated 3-shaft gearbox (2 pinions + central wheel) - Controlled steam extraction between HP and LP sections (included) Key design conditions: - Inlet steam pressure (HP): 16 bar(a) - Inlet steam temperature: 400 °C - Electrical output at terminals: up to 1,595 kW - Rated speed: 1,500 rpm Dodpfxsyidvdo Acfekt Electrical generator: - Three-phase synchronous generator - Rated power: 1,994 kVA - Voltage: 6 kV – Frequency: 50 Hz - Cooling: IC31, air - Brushless design, ready for grid-parallel operation Included systems: - Integrated base-mounted oil system - Main mechanical oil pump and auxiliary electric pump - Local control panel on skid - Control and protection panel with Siemens SIPROTEC 5 - Electronic speed and pressure governor - Independent overspeed protection device - ENC-RfG turbogenerator simulation model Typical applications: - Industrial cogeneration plants - Process steam energy recovery - Biomass and waste-to-energy facilities - Combined generation of electric power and process steam Condition and status: - Condition: NEW - Manufacturing year: late 2024 - Never installed – never commissioned - Still under manufacturer’s warranty - Complete OEM technical documentation available - Installation and commissioning possible with OEM support Possible application fields: - Biomass and waste-to-energy plants for the production of electric power and process steam, with immediate unit availability and no multi-year production lead times - Industrial cogeneration (CHP) in facilities with continuous process steam consumption (paper, food, chemical, manufacturing industries) - Revamping/repowering of existing plants as a rapid alternative to new OEM units with 24–36 month lead times Price: on request. Further technical details and documentation available upon request.

Stanje: novo, Leto izdelave: 2024, Funkcionalnost: popolnoma funkcionalen, premer žaginega lista: 500 mm, največja višina reza: 145 mm, največja širina rezanja: 510 mm, skupna masa: 400 kg, premer ekstrakcijske šobe: 150 mm, vrtljajska hitrost (min.): 2.800 obr/min, moč: 5,5 kW (7,48 KM), STROMAB PS 50/F Crosscut Swing Saw - Brand NEW Specification: Dkjdpfxjrdwm To Acfot • Condition: New • Motor power: 5.5 kW • Blade diameter: 500 mm • Motor shaft diameter: 30 mm • Motor speed: 2,800 rpm • Max. cutting width: 510 mm • Max. cutting height: 145 mm • Additional extension tables: 2 x 2 m • Weight: 400 kg • Year of manufacture: 2024/2025 • Noise emission: 85.5 dB(A) • CE compliant Additional information: • The tables shown in the pictures are included with the machine (2 x 2.0 m) • Available within 7–10 working days • Price does not include VAT or transport costs

Stanje: dober (rabljeno), Manufacturer: CLEARING Model: S4-900-180 Condition: Used Inventory number: Cod.0274 Press force: 900 ton Number of rams: 4 plungers Dsdotzy R Nopfx Acfskt Slide stroke: 940 mm Slide adjustment: 762 mm Strokes per minute: 16 Die height at BDC: 1,412 mm Slide dimensions: 4,572 mm x 2,438 mm Bolster dimensions: 4,572 mm x 2,130 mm Removable bolster: Yes Clearance (front): 4,622 mm Side opening in frame: 1,400 mm Hydraulic safety: Yes Cushion in bed: Yes Lower blankholder stroke: 280 mm

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 155-11000, Leto izdelave: 2021, Ponujamo 3D tiskalnik Stratasys Fortus 450mc v odličnem stanju, letnik 2021. Dedpfx Aeym Dl Nscfekt Če imate vprašanja ali potrebujete dodatne informacije, nam brez oklevanja pišite ali nas pokličite.

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, globina vrtanja: 1.000 mm, dolžina podajanja os X: 1.650 mm, dolžina pomika po osi Y: 1.000 mm, pomik po osi Z: 360 mm, največja hitrost vretena: 4.200 obr/min, premer vrtanja: 40 mm, hitro pomikanje X-os: 10 m/min, hitri pomik os Y: 10 m/min, hitri pomik na osi Z: 10 m/min, moč vretenovega motorja: 10.000 W, dolžina mize: 700 mm, širina mize: 1.400 mm, obremenitev mize: 4.000 kg, dolžina pomika os W: 500 mm, Selca S4040D CNC Control Drilling depth, transverse V-axis travel: 1,000 mm Column, longitudinal X-axis travel: 1,650 mm Drilling slide, vertical Y-axis travel: 1,000 mm Drilling slide, workpiece support W-axis travel: 500 mm Drilling slide, vertical 'swivel' max – A-axis degrees: +20° / -20° Rapid traverse, adjustable speed max: 10,000 mm/min Drilling diameter (solid material) min/max: 5 - 40 mm Drilling spindle, rotation, adjustable speed: 1 - 4,200 rpm Drilling spindle motor power: 10 kW Fixed clamping table, dimensions: 700 x 1,400 mm Clamping slots, standard type: 18 mm Hydraulic pump motor power: 7.5 kW Gun drill shank; shank for drills > 6: 10 x 40 mm Gun drill shank; shank for drills < 6: 25 x 70 mm Rotary & "BARRASENO" CLAMPING TABLE, B AXIS Dimensions: 800 x 1000 mm Clamping slots, standard type: 18 mm Maximum axial load (rotary): 4,000 kg Continuous radial resolution B-axis: 360,000 div/rev Maximum vertical resolution of "BARRASENO" – B1 axis: +20° / -20° Small milling/threading head etc. Dksdpfx Asxpwf Tecfot Maximum horizontal Z-axis stroke (830): 360 mm Spindle rotation, adjustable speed max: 2,200 rpm Threading spindle motor power: 10 kW ISO40 tool changer with 10 rotary-translating stations USED MACHINE

Leto izdelave: 2022, stanje: skoraj kot novo (rabljeno), Krožna žaga za profile, zasteklitvene letvice - OMRM 105, leto 2022 Dkedpfx Acow D Dq Uofot Tehnične specifikacije: • Samodejni rez PVC profilov za zasteklitvene letvice na 45° • 4 rezilne žagine plošče • Vertikalni pnevmatski prijemni sistem • Ročaj za enostavno prilagajanje matrice • Dvojni rez zasteklitvene letvice na 45° v enem postopku • Nastavljiva hitrost reza preko regulatorja na kontrolni plošči Standardna oprema z dovajalnimi in merilnimi trakovi (2,5 m + 2,4 m)

Stanje: rabljeno, Leto izdelave: 2004, številka stroja/vozila: SA/005006, WIDE BELT SANDER/THICKNESSER WITH 3 BELTS DMC MOD. USK1350 M3 - CE COMPLIANT - USED Dkedswrnmpjpfx Acfjt - 1 steel roller - 2 rubber rollers - 3 rubber rollers - 3 independent motors - Working width: 1350 mm - Equipped with pad system (short piece device) - Air blower on the third unit - On/off device on each sanding unit - Touch screen control - Serial no. SA/005006 - Year: 2004 - CE compliant

Stanje: novo, Leto izdelave: 2026, Zero errors, no waste, and increased productivity! We developed SalvaStop_100 as a core component to give your work a competitive edge. This electronic stop, controlled by a numerical system, precisely manages the feeding, stopping, and positioning of the profiles to be cut—regardless of the material. This allows you to significantly reduce human errors, minimize material waste, and lower labor costs. SalvaStop_100 comes equipped with exclusive software, featuring an intuitive, instantly accessible graphical interface for easy operation. Dkedpfx Ajkzhb Ujcfjt You can use SalvaStop either as a standalone device or in combination with one of our Legend crosscut saws to boost performance, ensure total operational safety, and virtually eliminate human error.

Leto izdelave: 2019, stanje: dober (rabljeno), Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 19-0088, Breton SPS 300/4T je vodoravni cepilni stroj za cepljenje keramičnih, marmornatih, naravnih in tehničnih kamnitih plošč, trakov ali ploščic. Dedpfxevupmwj Acfjkt