Hydr. pressbrake

AMADA FBD-8025F

Stanje: dober (rabljeno), Brand: Ercolina Model: CE40H3 Year of manufacture: 2006 Hydraulically driven Roll diameter: Ø 165 mm Shaft diameter: Ø 40 mm Tube capacity (thin wall): Ø 70 x 1.5 mm, min. Ø 700 mm Tube capacity (thick wall): Ø 2" x 3.2 mm, min. Ø 450 mm Angle profile capacity: 50 x 50 x 6 mm, min. Ø 400 mm Gbodpfew Hx Tvsx Anfel Flat bar capacity: 50 x 10 mm, min. Ø 250 mm Flat bar capacity (hard edge): 100 x 15 mm, min. Ø 250 mm Box section capacity: 50 x 50 x 3 mm, min. Ø 500 mm Shaft capacity: Ø 35 mm, min. Ø 250 mm Motor power: 1.85 kW Bending speed: 10 rpm

Stanje: dober (rabljeno), Manufacturer: OMERA Model: R4 / 12-2 Year of manufacture: 1976 Table length: 1900 mm Table width: 1000 mm Steady arm throat (horizontal): 670 mm Steady arm throat (vertical): 940 mm Gbjdpfxekvnumo Anfsl Ram stroke: 350 mm Column diameter: 200 mm Specifications Metric US Standard There are currently no specifications available for this machine. Dimensions (approximate) Length: 3000 mm Width: 2200 mm Height: 2500 mm Weight: 2800 kg Please note: The information on this page has been provided to the best of our knowledge and, where possible, obtained from the manufacturer. The information is given in good faith, however, accuracy cannot be guaranteed. Accordingly, this information does not constitute any representation or contractual terms. We recommend verifying all important details.

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 2023, Usable working area: 2000x3000mm, Z-axis: 50mm, positional repeatability across the entire area: ±0.05mm, X/Y/Z addressable resolution: 0.001mm, max. acceleration: 15m/s², max. working speed in XY-axis: 2000mm/s, drives: X/Y system with linear motors, Z-axis with servomotor, laser safety class: class 1 with cover hood, base frame: robust welded steel structure, axis system: X/Y/Z axes of motion, drive: linear motor drive, contactless and low-wear, unloading system: extension 2000mm, conveyor: aluminum slat conveyor with servo motor drive, pressure roller: for material feed, laser source: 300W CO2 laser, sealed and maintenance-free, cooling: closed water circuit with water chiller for the laser, cutting head: 5-inch lens, cutting nozzle, cutting gas supply, extraction: extraction tray for small parts and dust, software: CAM control software ICARO, motorized brush width: 2000mm, SEI PC console: PC not included, to be provided by customer, extraction unit: 2x extraction blowers at 5.5kW each, scanner: manual barcode scanner, unwinding device: for material rolls with unwinding bar, unwinding system: connection available. The system was only set up and accepted, serial operation has not taken place. On-site inspection possible, documentation available. Gbjdpowbuzfsfx Anfsl

Stanje: zelo dobro (rabljeno), Leto izdelave: 2012, Model: Amada HFE M2 220t 4m, 8-osna hidravlična upogibna stiskalnica Letnik: 2012 Tonska moč: 220 ton Največja dolžina upogiba: 4280 mm Dolžina hoda: 200 mm Hitrost približevanja: 1 – 100 mm/s Hitrost upogibanja: 1 – 10 mm/s Hitrost vračanja: 1 – 100 mm/s Kapaciteta olja: 195 l Moč motorja: Teža: 17.450 kg Dimenzije: Dolžina stroja: 5070 mm Globina stroja: 2075 mm Višina stroja: 3085 mm Razdalja med stranskima okvirjema: 3760 mm Širina prečke: 180 mm Gbsdpov S U Izsfx Anfsl Višina mize: 960 mm Odprtina (svetel odprt): 470 mm Globina grla: 420 mm

Leto izdelave: 2013, stanje: pripravljen za uporabo (rabljen), - RABLJEN - FIBER LASERSKI REZALNI STROJ S PALETNIM IZMENJEVALCEM IN SISTEMOM ZA NALAGANJE/RAZLAGANJE X-OSNI HOD: 3270 mm Y-OSNI HOD: 1550 mm Z-OSNI HOD: 100 mm DELOVNA POVRŠINA: 3070 x 1550 mm DOVOLJENA OBREMENITEV MIZE: 920 kg Gbodpfovhc S Hox Anfjl VIR: AJ2000 Fiber ; 2000 W KRMILNA ENOTA: AMADA AMNC3i TEŽA: 11.200 kg SKUPNE DIMENZIJE: 10028 x 2900 x 2000 mm OPOMBA: S SISTEMOM ZA NALAGANJE/RAZLAGANJE LKI 3015FLC-AJ LETNIK 2013; AVTOMATSKA ZAMENJAVA ŠOB

Stanje: rabljeno, Leto izdelave: 2004, Funkcionalnost: popolnoma funkcionalen, Amada HFE 220-L Year of manufacture: 2004 Laser height adjustment Working width: 3100 mm Pressing force: 220 tonnes Godouiwypspfx Anfebl Equipped with numerous tools

Stanje: rabljeno, Leto izdelave: 2007, Working width: 1,380 mm Workpiece height: 70 mm Total power requirement: 45 kW Machine weight approx.: 5,500 kg E R N S T Automatic sheet metal deburring machine with wet grinding system Type: EM 5 N/II/L + 2 B/1400 Year of manufacture: 2007 Factory no.: 780063 _____ Grinding width approx.: 1,380 mm Roller width: 1,400 mm Maximum workpiece height: 1 – 70 mm Feed speed, infinitely variable: approx. 1.5 – 8 m/min Consisting of 5 working units: Oscillating grinding roller for abrasive cloth (non-woven abrasive) Ø 450 mm, 1,400 mm wide x 1,540 mm long, with pneumatically adjustable belt tension, 11 kW drive Brush roller unit with two counter-rotating brush roller shafts 350 mm Ø, drive 2 x 5.5 kW, abrasive flap wheels or non-woven flap wheels, adjustable for wear. Brush roller unit for fitting 2 rollers Ø 250 mm, drive 2 x 5.5 kW, rollers adjustable via handwheel, also ideal for removing oxide layers. Wet grinding system with band filter unit and closed water circuit, installed under the feed belt and easily retractable from the machine. Washing and drying unit, designed for minimum workpiece length of 80 mm, water and air volume adjustable, etc. Workpiece is transported from the front via a continuous conveyor belt (minimum part length 350 mm) with a vacuum suction system across 300 mm on the right and a magnetic track 300 mm wide, suitable for holding small parts up to a minimum length of 80 mm. Frequency converter for stepless speed regulation of the abrasive flap brushes from 250 – 1,000 rpm (position 2, top), as well as for belt feed. Control panel with clear controls and digital display for roller adjustment, 4 ammeters for monitoring roller drives, status LEDs. Quick-change facility for lateral extraction of abrasive flap brushes, as well as a range of replacement rollers with Gbedpfx Aet Hw Iijnfjl non-woven abrasive and brush trim. Total drive approx.: 45 kW - 400 V - 50Hz Weight approx.: 5,500 kg Condition: Good to very good Delivery: Ex stock – as inspected Payment: Net – upon receipt of invoice

Leto izdelave: 1999, stanje: zelo dobro (rabljeno), Control: CNC-controlled and manual operation PC P 2000 MMX-PCI Desktop ATX 15" color monitor, keyboard CNC Turbo Roughness for WINDOWS TECHNICAL DATA Gbjdpslxyp Hsfx Anfjl Hard stone inspection plate (DIN 876) Length x Width: 1200 x 500 mm Accuracy grade: Grade 2 Flatness: 16.6 µm Weight: 250 kg Linear Feed Unit Waveline 60 Basic Measuring range: 60 mm Resolution: 0.014 µm Measuring Column Wavelift 400 CNC Travel: 400 mm Positioning repeatability: < 10 µm Machine Dimensions (W x D x H): 1.8 x 0.8 x 2.2 m Weight: 600 kg EQUIPMENT/ACCESSORIES  Full enclosure with electrically operated roller shutters  Hard stone plate 1200 x 500 mm  ISEL feed axis with ball screw drive  Workpiece holding plate  Linear feed unit Waveline 20/60  Measuring column Wavelift 400 CNC  Tilting unit KEG 60 on the measuring column, manual to the Waveline  Installation kit for roughness measurement  Installation kit for contour measurement  Various probes and holders for roughness and contour measurement  Machine table  Emergency stop button on the machine table  Calibration set  Support prisms  Maintenance unit for compressed air preparation  Air damping elements for supporting the hard stone plate  Documentation

Leto izdelave: 2000, stanje: generalkompletno obnovljen (rabljeno), System for filling, cooling, and sealing suppository casting packs made of plastic. Gjdpfx Ansfc I Hajfobl The line was completely overhauled mechanically and electronically in 2019 and is as good as new. Before delivery, the system will be tested with suppositories supplied by CP-Citopac GmbH. For further technical details, please refer to the data sheet.

Stanje: dober (rabljeno), Leto izdelave: 1956, Heavy-duty lathe, lathe, engine lathe, geared head lathe, screw-cutting lathe - Manufacturer: Weisser, Geared Head Lathe Type PF200 - Turning length: 1340 mm - Swing over bed: 420 mm - Swing over cross slide: 240 mm - Spindle bore: Ø 41 mm - Spindle speeds: 31.5 - 1400 rpm Gbsdpfx Aotzf N Ronfjl - Three-jaw chuck: Röhm Ø 250 mm - Accessories: included, see photos - Tailstock taper: MT4 - Drive motor: 2.5/3.5 kW - Dimensions: 2670/1000/H1230 mm - Weight: 1450 kg