45 kW reguliran vijačni kompresor

ALMIG VARIABLE XP 45

Stanje: kot nova (razstavni stroj), Leto izdelave: 2022, Immediately available: New ALMIG LENTO 22 LK variable speed screw compressor (air-cooled), oil-free Equipment: - AIR CONTROL P controller Technical Data Type: LENTO 22LK Possible Operating Overpressure of the System (infinitely adjustable): 5 to 10 bar Free air delivery at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.03 / 3.67 m³/min at 6 bar min/max: 1.00 / 3.46 m³/min at 7 bar min/max: 0.97 / 3.29 m³/min at 8 bar min/max: 0.93 / 3.06 m³/min at 9 bar min/max: 0.90 / 2.82 m³/min at 10 bar min/max: 0.87 / 2.58 m³/min Drive motor rated power: 22 kW Protection class / insulation class (drive motor): IE 3 Fan motor rated power: 0.2 kW Protection class / insulation class (fan motor): IP 54 / H Operating voltage / frequency: 400 / 50 V/Hz Residual oil content: 0 mg/m³ Sound pressure level (DIN 45635 T.13), sound-insulated, at: 50% load: 67 dB(A) 100% load: 69 dB(A) Length: 1,880 mm Width: 850 mm Height: 1,985 mm Weight: 910 kg Compressed air connection: G 1 inch Screw compressors from the oil-free LENTO series ensure maximum efficiency in compressed air treatment thanks to precise adjustment of the volume flow to the respective compressed air demand, low compressed air discharge temperatures, and minimized service and maintenance costs. The demand for high-quality, 100% oil-free compressed air is not only required in the pharmaceutical, food, electrical engineering, and medical sectors but is also used wherever products of the highest quality are produced. That is why ALMiG relies on the oil-free compressors of the LENTO series for maximum compressed air quality in the most sensitive applications. Within the compression process, only water—the most natural of all raw materials—is used. The result is: - Clean, environmentally friendly compressed air without oil; intake dust particles are washed out by the water - Clean condensate—pure water—can be discharged directly into the sewage system - Lowest temperatures during compression due to optimal heat dissipation via water, resulting in minimal energy consumption for compressed air generation Rbedpfx Adsh Unpro Tot

Leto izdelave: 2022, obratovalne ure: 1 h, Stanje: novo, New ALMIG LENTO 15 LK oil-free, speed-controlled screw compressor (air-cooled) Equipment: - AIR CONTROL HE control system - GLW load/idling operation Technical Data Type: LENTO 15LK Adjustable system operating pressure (infinitely variable): 5 to 10 bar FAD at minimum/maximum speed, measured according to ISO 1217 Annex C: at 5 bar min/max: 1.03 / 2.64 m³/min at 6 bar min/max: 1.00 / 2.42 m³/min at 7 bar min/max: 0.97 / 2.20 m³/min at 8 bar min/max: 0.93 / 2.03 m³/min at 9 bar min/max: 0.90 / 1.82 m³/min at 10 bar min/max: 0.87 / 1.63 m³/min Drive motor rated power: 15 kW Rsdpfx Adedtm Ndo Tsbt Drive motor protection class/insulation class: IE3 Fan motor rated power: 0.2 kW Fan motor protection class/insulation class: IP54 / H Operating voltage / frequency: 400 V / 50 Hz Residual oil content: 0 mg/m³ Sound pressure level (DIN 45635 T.13), sound-insulated, at 50% load: 66 dB(A) 100% load: 68 dB(A) Dimensions: Length: 1,880 mm Width: 850 mm Height: 1,985 mm Weight: 890 kg Compressed air connection: G 1" Oil-free screw compressors of the LENTO series ensure maximum efficiency in compressed air treatment due to precise matching of compressed air output to demand, low discharge temperatures, and minimized service and maintenance costs. The requirement for high-quality, 100% oil-free compressed air is not only essential for sectors such as pharmaceuticals, food, electronics, and medical technology, but is also utilized wherever products of the highest quality are produced. This is why ALMiG relies on maximum compressed air quality in sensitive applications with the oil-free compressors of the LENTO series. During the compression process, only water—the most natural of all resources—is used. The result: - Clean, environmentally friendly compressed air without oil; any entrained dust particles are washed out by the water - Clean condensate—pure water—can be discharged directly into the sewage system - Lowest compression temperatures thanks to optimal heat dissipation via water, resulting in minimal energy consumption for compressed air generation

Stanje: zelo dobro (rabljeno), Leto izdelave: 2025, obratovalne ure: 1 h, Funkcionalnost: popolnoma funkcionalen, Exhibition unit, immediately available: Almig variable screw compressor COMBI XP 15 – 15 kW – with Aircontrol Basic controller Model: Combi XP 15 Controller: AIR CONTROL BASIC Year of manufacture: 2025 Technical Data Model: Combi XP 15 Adjustable operating pressure range (infinitely variable): 5 – 13 bar Free air delivery at minimum / maximum speed, measured according to ISO 1217 Annex C at 5 bar (g): 0.50 to 2.49 m³/min at 6 bar (g): 0.48 to 2.41 m³/min at 7 bar (g): 0.48 to 2.32 m³/min Rodpfxsxwb Rpj Ad Tobt at 8 bar (g): 0.45 to 2.23 m³/min at 9 bar (g): 0.45 to 2.12 m³/min at 10 bar (g): 0.45 to 2.02 m³/min at 11 bar (g): 0.45 to 1.90 m³/min at 12 bar (g): 0.44 to 1.80 m³/min at 13 bar (g): 0.43 to 1.69 m³/min Installed motor power: 15 kW Motor protection rating / insulation class: IP 23 Operating voltage / frequency: 400 / 85–400 V/Hz Compressed air connection: 3/4" G Dimensions and weight: Length (mm): 691 Width (mm): 1051 Height (mm): 1088 Weight (kg): 410 kg Visit our facilities in Erlangen. We always have a large selection of new and used screw compressors in stock. Simple leasing available through our house bank (also for Austria & Switzerland).