7,5 kW vijačni kompresor s sušilnikom

ALMIG COMBI 8 D

Leto izdelave: 2021, Stanje: zelo dobro (rabljeno), used screw compressor ALMIG COMBI 8/270D - 10 bar (air-cooled) with integrated refrigeration dryer with timer-controlled condensate drain with 270 liter receiver tank with AirControl Mini controller Year of manufacture: 2021 Operating hours: 2,600 h The compressor has some dents on the exterior but is technically 100% functional. Technical data Model: COMBI 8/270D Operating overpressure: 10 bar(g) Free air delivery, according to ISO 1217 Annex C: 1.02 m³/min Degree of protection / insulation class of drive motor: IP 55 / ISO F Rated power of drive motor: 7.5 kW Operating voltage / frequency: 400/50 V/Hz Gksdpfx Aeiqym Hjb Tsf Sound pressure level (DIN 45635 T.13): 64 dB(A) Length: 1,180 mm Width: 770 mm Height: 1,680 mm Weight: 460 kg Compressed air connection: G 3/4" Attractive leasing available through our partner bank. Visit our showroom. We always have a large selection of new and used compressors in stock! Immediately available.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1998, stiskalna sila: 125 t, Hydraulic Press Brake Make: EHT Type: VARIOPRESS 125-3550 Year: 1998 Technical specifications Brand: EHT Model: Variopress 125-3550 Year of manufacture: 1998 Press force: 125 t Working length: 3550 mm Machine frame width: 2550 mm Throat depth: 300 mm Stroke: 240 mm Installation height: 640 mm Oil capacity: 250 L Dimensions (approx.): L 3.90 x W 1.80 x H 3.00 m Weight (approx.): 12 t Equipment • Control system: Cybelec DNC 80 2D graphics • Automatic upper tool clamping • Lower tool clamping 90mm and 13mm Gsdpfor Epr Uox Ab Tskf • Controlled axes: Y1, Y2, X1, X2, R, Z1, Z2 • Motorised crowning • 6 x V-block die, length 3,500 mm, segmented: with V12/30°, V40/80°, V24/80°, V10/30°, V24/30°, V16/30° • Straight punch, height 350mm / approx. 70°, length 3060 mm, segmented All information subject to change without notice. A demonstration under power is possible at any time in our showroom.

Stanje: zelo dobro (rabljeno), Leto izdelave: 1996, hod: 160 mm, stiskalna sila: 120 t, Hydraulic Press Brake Manufacturer: DURMA Model: HAP 30120 Year: 1996 Technical Specifications Manufacturer: DURMA Model: HAP 30120 Year of manufacture: 1996 Press force: 120 t Bending length: 3050 mm Stroke: 160 mm Motor power: 11 kW Dimensions: L 4,150 x W 1,950 x H 2,600 mm Weight: 7.5 t Equipment • Controlled backgauge • Penetration depth adjustable via control panel • Controlled axes: X, Y • 2 support arms • Technical documentation • Tooling: Gkedpju Iarbjfx Ab Tef o Multi-V-die V12, V20 (slightly damaged), V13, V16, V45, V15, V10, V65 Length 3,050 mm o Upper tool, slightly offset, H 150 mm, L 2,970 mm, segmented All information without guarantee. A demonstration is possible at any time in our showroom.

Stanje: zelo dobro (rabljeno), Leto izdelave: 2000, Pressure: 105 t Bending length: 3,100 mm Distance between uprights: 2,600 mm Table width: 100 mm Gsdpfxevq R Uus Ab Tskf Table height: 750 mm Control system: DELEM DA 65 Installation height: 200 mm Working speed: 0 - 10 mm/sec Return speed: 0-100 mm/sec Rapid traverse upward max.: 100 mm/sec Electrical connection: 380 V / 50 Hz Total power requirement: 11 kW Machine weight approx.: 7.5 t Space requirement approx.: 4 x 2.2 x 2.8 m Equipment: - CNC control DELEM DA65 graphic video - Motorized backgauge with 2 axes - New lower tool - Two-hand operation / foot pedal

Stanje: pripravljen za uporabo (rabljen), Leto izdelave: 1994, The press brake was manufactured in 1994. Working length is 1250 mm with a pressing force of 600 kN. Manufacturer: Micoda Working length: 1250 mm Pressing force: 600 kN Weight: 4000 kg Power: 10 kW Gjdsp R Ircopfx Ab Tjkf

Leto izdelave: 1992, Stanje: dober (rabljeno), številka stroja/vozila: 03.323.36002, Lg.No. 22621 Technical Data: - Max. working length: 3500 mm - Frame gap: 3050 mm - Max. pressing force: 2000 kN - Distance table / ram: max. 480 mm - Throat depth: 260 mm - Ram stroke approx.: 300 mm - Stroke speeds: - Downward rapid traverse: max. 100 mm/sec - Upward speed: 80 mm/sec - Pressing speed (down): max. 10 mm/sec - Total motor power: 25 kW Gkjdpfxoip Nikj Ab Tef - Required space approx.: W 4500 x H 3150 x D 2100 mm - Weight approx.: 16,000 kg - Equipped with: - CNC control CYBELEC, renewed in 2008 - Controlled crowning system - Controlled backgauge with height adjustment 5 - 1000 mm - Hydraulic tool clamping - Upper tool + universal die tool - Sheet supports - Two-hand control console

Stanje: zelo dobro (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 1999, Hidravlična upogibna stiskalnica PPBL 135/30 Leto izdelave: 1990 Tehnične specifikacije Sila: 1350 kN Delovna dolžina: 3050 mm Razdalja med stebri: 2250 mm Hod: 110 mm Razdalja miza – bat: 310 mm Luknja: 200 mm Širina mize: 180 mm Gksdsw Hca Hjpfx Ab Tsf Približevalna hitrost: 100 mm/s Delovna hitrost: 8 mm/s Povratna hitrost: 65 mm/s Teža: 6500 kg Motor: 7,5 kW Napetost: 3 x 380 V Oljni rezervoar: 120 l Vključene možnosti: • Zadnji pomik z 2 prstoma • Obseg zadnjega pomika 600 mm • 2 prednji podpori po 300 mm • Miza s centralno režo Orodje vključeno s strojem: • R10.180.78., 6x508 mm • Multi-V M90, 1x3050 mm

Leto izdelave: 1995, Stanje: pripravljen za uporabo (rabljen), A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000 kN, working width: 3000 mm, distance between columns: 2550 mm, daylight opening: 370 mm, stroke: 100 mm, throat depth: 400 mm, approach speed: 70 mm/s, bending speed: 9 mm/s, return speed: 85 mm/s, drive power: 10.5 kW. Machine dimensions (L/W/H): approx. 3500 mm / 2200 mm / 2300 mm, weight: approx. 6400 kg, control: Amada Operateur, operating hours: 36,261 h. The press is still in operation, so operating hours are continuously increasing. Documentation is available. An on-site inspection is possible. Gkedpfx Abswm Nn Rs Tof

Stanje: dober (rabljeno), Leto izdelave: 1980, Donewell press brake Type: 80-2500 Control unit: Cybelec CP 9220 Pressing force: 80 t Working width: 2540 mm Year of manufacture: 1980 Gksdpfx Absqgcqio Tsf Dimensions: 255x130x265 cm (LxWxH) Weight: approx. 6300 kg

Stanje: rabljeno, Leto izdelave: 1997, The press brake was manufactured in 1997 in England at the EDWARDS PEARSON factory. The bending press is in good condition and is being sold complete with tooling. It has always been serviced and maintained on schedule. The machine is connected and can be demonstrated or inspected on site. Specification: Gsdpfx Abjrfx Uto Tekf Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Working length: 3,100 mm Bending force: 100 t Stroke: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1, Z2, R Tooling: Included Weight: 7 t Other: Newly replaced display, connected keyboard for easier operation. If you have any further questions, we will be happy to assist you.