škarje za staro železo

Akros Henschel CIV600-8L

Stanje: novo, največja dovoljena obremenitev: 50.400 kg, skupna masa: 65.000 kg, konfiguracija osi: 3 osi, skupna širina: 2.540 mm, Oprema: ABS, You can find our complete range of vehicles, including those available immediately or at short notice, on our website. Excerpt from the equipment specification. Full specification available on request. GOOSENECK Fedpfjtx Nwnox Ahmogc * Gooseneck in SNT design to optimize platform length, approx. length 3,700 mm, with rear bevel of approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX at the front connection rail with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, except for hydraulic winches * 1 pair of detachable ALU side walls, approx. 400 mm high, anodized finish * 1 detachable ALU rear wall, approx. 400 mm high, anodized finish * Over the gooseneck, approx. 40 mm thick hardwood flooring, over the king pin with checker plate covering * 2-inch king pin * Mount at the rear of the gooseneck for ALU drive-on ramps * Round NATO socket at the front connection rail (Maeler & Kaege VG 96 917) LOAD PLATFORM * Extendable load platform, approx. length 8,800 mm, with rear bevel approx. 500 mm x 10° * Recess in platform and rear bevel for accommodating an excavator dipper stick, approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system in accordance with ECE R 141 * BPW axles and suspension, 1st axle self-steering, all other axles hydro-mechanically forced steered * 1st axle with electromagnetic reversing lock, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with lift and lower valve * Tires: 235/75 R 17.5 3PMSF twin tires * Mechanical landing legs with 2-speed gearbox and crank, JOST Modul B - static test load = approx. 50,000 kg * Platform with continuous and between-axles interrupted 50 mm thick hardwood flooring (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable galvanized side extensions by approx. 230 mm each side (without wooden planks) * Wheel wells with square climbing strips, approx. 15 x 15 mm in front of the axles, continuous opening up to the cross member of the gooseneck, approx. 700 x 410 mm (W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel wells with square climbing strips, approx. 15 x 15 mm between the 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * ALU covers for the wheel wells, usable as bridging elements for the extension OR as width extension planks * Lockable aluminium elements on the extension tubes of the side extensions * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with single-track monitoring of the axles, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-part steel ramps, type: DR-15/60-900-4350-KG-HV-M, approx. length 4,350 mm and width approx. 900 mm * Hydraulically folding ramp tips * Ramps hydraulically adjustable individually by approx. 235 mm outward and approx. 215 mm inward * Super Grip rubber surface approx. 25 mm and steel surface approx. 5 mm as additional

Stanje: kot nova (razstavni stroj), Leto izdelave: 2025, obratovalne ure: 500 h, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: 25-029, skupna širina: 800 mm, skupna dolžina: 4.700 mm, skupna višina: 1.900 mm, vrsta vhodnega toka: trifazni, poraba energije: 2 kWh, Very good metal separator / metal detector for the separation of all metals (including stainless steel, VA) from a material flow. Can be used before or after an eddy current separator (non-ferrous separator) or as a stand-alone machine. Separates all metals from a grain size of approx. 1 mm. Suitable for applications with metal content up to 60%. Unique flap technology (flipper), no compressed air required. The machine is ready for immediate operation and can be inspected and tested. Camera option available on request! If the machine is too small, we also manufacture larger models. This is our demonstration machine. The maximum throughput depends on the material and application. Fodpoqabm Esfx Ahmegc Price negotiable!

Stanje: skoraj kot novo (rabljeno), Funkcionalnost: popolnoma funkcionalen, Leto izdelave: 2025, obratovalne ure: 55 h, Machine with special rotor Available immediately Advantages: + Special rotor with reduced blade projection, suitable for hard and soft materials + 22 kW motor + Effective square cutters/blades *For pallets: up to a maximum of 10 pallets per hour *Depending on screen and material. Considerably higher throughput with smaller residual wood. Motor: 22 kW; 400 V - 50 Hz - 3 phase Screen: 15/20 mm or as agreed (10 to 40 mm possible) Hydraulically operated pusher Current screen perforation (15/20 mm) *can be exchanged Extraction connection Ø 200 mm Feed opening 1000x1000 mm Dimensions: 2000x1800x1645 mm Sample image above: colour of the machine may vary Weight: 1920 kg Standard equipment included: - Control cabinet with PLC control - Automatic star/delta start - High-speed hydraulics - Automatic shutdown when rotor is idling - 70-90 rpm for high throughput performance - Cycle control to prevent idle times - Performance-enhancing step control for the hydraulic pusher - Pertinax guides for hydraulic pusher - Vibration-dampening machine feet - CE compliant Fedpfjx Af Rdjx Ahmegc The following options are available at an extra charge: - Raise the shredder by 30 cm (prepared for conveyor belt) + €2,480 net - Angle conveyor (discharge height approx. 220 cm) + €12,980 net - Overband magnet + €6,980 net - Control for conveyor and overband magnet + €2,750 net (Start and stop synchronized with the shredder) - Enlarged hopper extension 1500x1500 mm + €3,480 net Raw material requirements: - Moisture content (atro) must be below 25% - Material feed must be free from metals and mineral impurities. Damage to the tools and/or increased wear may result.

Stanje: rabljeno, prevoženi kilometri: 53.857 km, moč: 270 kW (367,10 KM), prva registracija: 06/2003, vrsta goriva: dizel, skupna masa: 36.000 kg, konfiguracija osi: 3 osi, barva: rumena, vrsta prenosa: samodejen, emisijski razred: Euro 3, skupna širina: 2.680 mm, skupna višina: 3.750 mm, Oprema: parkirni grelec, Liebherr UTM 735 - Žerjav: LTM 1055/1 - Leto izdelave: 2003 - 22.439 delovnih ur podvozja - 18.883 delovnih ur zgornjega dela žerjava - Prevoženih: 53.857 km - 4 x hidravlični podaljšek - 16 m jib - Hidravlično krmiljenje - 12 t dodatnih uteži - LED rotacijske luči Fgjdsw H Hwvepfx Ahmoc - Tehnični pregled (TÜV) zapade: - Poseben pregled (SP) zapade: 01.2026 - Pnevmatike: 445/95 R 25 Pridržujemo si pravico do napak in predčasne prodaje. Interna številka vozila: 11218 Podpora prek WhatsApp na voljo! Za vprašanja o vozilu ali dodatne informacije nam pišite preko WhatsAppa WhatsApp WhatsApp

Stanje: zelo dobro (rabljeno), Leto izdelave: 2005, Funkcionalnost: popolnoma funkcionalen, Rabljena Andritz Paladin 600B Fgedpfox N T Uaox Ahmoc Vključuje kombiniran nerjavni dozirni polž in mešalnik, 2 x 55 kW motorja, drugi motorji po dogovoru Notranjost pregledana pred 2 leti Vključen okvir za menjavo valjev in matric

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2019, Presto HAN10R Stiskalni kontejner za nakladalce z izmenljivimi prekucniki 10 m³ uporabne prostornine Izpraznitvena vrata pritrjena zgoraj Fgedpfsw Uqngex Ahmoc Dvojni pokrov nad polnilno odprtino, odpira se levo/desno Pripravljeno za upravljanje na rampi Stroji so obnovljeni, servisirani, preverjeni in prebarvani v standardnem RAL odtenku. Slike so referenčne slike strojev enakega tipa, ki jih izdelujemo sami Z veseljem pripravimo ponudbo z vključno dostavo.

Stanje: rabljeno, 3-axle truck trailer, low-loader trailer MÜLLER MITTELTAL type AZP Curtainsider low-loader, low-loader trailer, low-loader for machinery transport First registration: 2001 Total mileage: approx. 350,000 km Gross vehicle weight: 24,000 kg Curb weight: 5,500 kg Payload: 18,500 kg Fgedpfx Ahjt N Antomec Platform height: 840 mm Load height under the curtain frame: 3,200 mm Platform length: 7,450 mm Overall length: 9,150 mm Overall width: 2,550 mm Overall height: approx. 4,050 mm Axle load front: 8,000 kg Axle load middle: 8,000 kg Axle load rear: 8,000 kg Tyres: Michelin 215 / 75 R17.5 (135/133J XTE 2+ TL) - Rear swing doors at sideboard height - Curtain frame with EDSCHA roof system - Curtain frame easy to dismantle (usable even with the curtain frame removed and the curtain moved forward) - Spare wheel mounted on the front wall - Separate raising and lowering of front and rear axles - Middle axle as lift axle - Drawbar – extendable in several stages - Very sturdy lashing rings on the outer frame and in the centre of the vehicle - ALU loading ramps, length 268 cm, width 410 mm, height 130 mm (surcharge EUR 2,000 net) The vehicle was purchased as a new vehicle by us, i.e. from first ownership. The trailer has been deregistered since 2025.

Leto izdelave: 2019, obratovalne ure: 1 h, stanje: kot nova (razstavni stroj), številka stroja/vozila: MISCO1082,

Stanje: rabljeno, Leto izdelave: 2006, Funkcionalnost: popolnoma funkcionalen, Popolna linija za briketiranje 2 x RUF 330. Kotlovnica, bobnasti sušilnik, transporterji. Fodpfx Ahjxazhtomegc

Stanje: delavnici obnovljeno (rabljeno), Leto izdelave: 2001, Funkcionalnost: popolnoma funkcionalen, številka stroja/vozila: HBC 140 2x75kW 2001 (210-008-01), stiskalna sila: 155 t, teža bale: 1.500 kg, pritisk: 250 letvica, moč: 150 kW (203,94 KM), leto zadnje generalne obnove: 2024, Oprema: dokumentacija / priročnik, Verkocht door Bollegraaf Recycling Solutions, de originele fabrikant van deze Bollegraaf-pers en transportband: Bollegraaf HBC140s Kanaalbalenpers (2x75kW). Pers: Gewicht: 47.100 kg Bouwjaar: 2001 Variabele kanaaldrukregeling Kunststof ventiel Anti-ratten bekabeling Draaiuren: 0 na volledige revisie Deze pers wordt volledig gereviseerd verkocht volgens de 'Bollegraaf OEM Certified Refurbishment standards', inclusief 2 jaar garantie. Neem contact met ons op voor meer informatie of een offerte. Algemene principes van revisie Reiniging & demontage Voordat de feitelijke revisie plaatsvindt, wordt de pers volledig gereinigd en gedemonteerd in onze revisiewerkplaats. Fsdpfx Aotvau Ajhmsgc Toleranties Na demontage worden de toleranties van alle stalen componenten gemeten en opnieuw gelast waar nodig. Dit geldt ten minste voor de volgende onderdelen: • Persplunjer, • Frame, • Perskanaal, • Voorpersklep Na demontage en inspectie wordt de persplunjer opnieuw opgelast en voorzien van nieuwe plunjerwielen. De beschermroosters en de voorpersklep worden deukvrij gemaakt en waar nodig gerepareerd. Opnieuw gespoten Na het meten van de toleranties en alle benodigde reparatie- en laswerkzaamheden, worden alle onderdelen gestraald en opnieuw gecoat. Hydrauliek: De hydrauliektank wordt gereinigd. De hydrauliekleidingen en -slangen worden vervangen. De hydraulische componenten worden opnieuw verpakt. De hydrauliekolie wordt vervangen. Bekabeling: Alle bekabeling wordt gecontroleerd en indien nodig vervangen. Alle aansluitkasten worden vervangen en teruggeplaatst op goed toegankelijke plekken. Slijtdelen: Alle slijtdelen worden vervangen. De pennen en assen van de cilinders en het perskanaal worden vernieuwd. Alle slijtdelen van beide naaldinstallaties en knopers worden vervangen door nieuwe. Cilinders: De cilinders worden opnieuw verpakt en indien nodig voorzien van een nieuwe chroomlaag of een nieuwe cilinderstang. MCC Kast De schakelkast wordt gecontroleerd en schoongemaakt. Indien nodig worden elektronische componenten vervangen door nieuwe. De PLC en HMI (mens-machine-interface) worden vervangen door de nieuwste Schneider M340-versie, inclusief de meest recente software.